Explore Project Topics on: ELECTROMECHANICAL ENGINEERING DEPARTMENT TOPIC ON A VERTICAL SINGLE-AXIS SOLAR TRACKER

Abstract The increasing accessibility to internet resources has made several companies adopt the use of such resources in their processes. Axis Human Capital Limited, a human capital management and development company in Ghana, needed a mobile application that mitigates the problems that their clients face when using their website and has other... Continue Reading

PREFACE A new machine/equipment will provide satisfactory service if kept in proper operating condition. The inevitability of less than 100% reliability of any machine/equipment after some period and maintenance. Also in system of any complexity, certain replacement adjustments are... Continue Reading

REPAIR OF DEEP FREEZER ABSTRACT This work gives an account of all activities carried out to restore a faulty and abandoned deep freezer to normal functioning. This report therefore contains the different stages embarked in the execution of the project. These include the literature back ground, checking’s conducted, cleaning, repair operations... Continue Reading

ABSTRACT In the mechanical engineering department of institute of management and technology there are many machines but it is not all that is functioning well. This may airless as a   result of lack of maintenance which is a prove in the breakdown of the air conditioner. The quality and effectiveness of materials were mated very well as referred... Continue Reading

ABSTRACT The aim of this study is to fabricate a solid ankle cushion heel (SACH foot) and comparison of the differences and effect of this SACH foot on the cardiovascular responses and gait efficiency of fifteen unilateral transtibial amputees with foreign SACH foot and Single axis foot. The SACH foot was fabricated using available local... Continue Reading

ABSTRACT Mechanical Engineering Department of the Institute of Management and Technology has many non – functional machines. This is caused as a result of poor maintenance culture, which in turn resulted to breakdown of the Deep Freezer under review.... Continue Reading

ABSTRACT  Mechanical Engineering Department of the named Institute has many non – operational malhiues. Sequel to the fact, maintenance was poorly excuted which resulted to the breakdown deep freezer. Quality and effectiveness of machine maintenance were well observed. Also, a minimized maintenance and a highly successful  repair was adopted.... Continue Reading

ABSTRACT Mechanical Engineering Department of the named Institute has many non – operational malhiues. Sequel to the fact, maintenance was poorly excuted which resulted to the breakdown deep freezer. Quality and effectiveness of machine maintenance were well observed. Also, a minimized maintenance and a highly successful repair was adopted. In... Continue Reading

ABSTRACT This project is aimed at producing a solar charger controller which help to improve the steady power supply in department of science laboratory technology IMT Enugu the smart charge controller is designed, so that the battery does not get over charged thereby ensuring no reduction of durability of the battery. This kind of system requires... Continue Reading

ABSTRACT This project presents a 40A maximum power point tracking solar charge controller. The MPPT charge controller tries to keep the voltage and the power stable. The MPPT charge controller will harvest more power from the solar array – it will adjust its input voltage to harvest the maximum power from the solar array and then transform this... Continue Reading

ABSTRACT This project presents a 40A maximum power point tracking solar charge controller. The MPPT charge controller tries to keep the voltage and the power stable. The MPPT charge controller will harvest more power from the solar array – it will adjust its input voltage to harvest the maximum power from the solar array and then transform this... Continue Reading

ABSTRACT This report covers all activities candied out to rehabilitate a faulty refrigerator. First and foremost, we diagnosed the faulty refrigerator using the basic instruments to know the faults. After which we bought the necessary standard items that caused the fault.  We then started work on it by replacing necessary instruments.  We... Continue Reading

ABSTRACT This report covers all activities candied out to rehabilitate a faulty refrigerator. First and foremost, we diagnosed the faulty refrigerator using the basic instruments to know the faults. After which we bought the necessary standard items that caused the fault.  We then started work on it by replacing necessary instruments.  We... Continue Reading

ABSTRACT Despite all attempt of the federal government to have not only an uninterrupted power supply for all cities in Nigeria, but a voltage that is inconformity with the recommended 220/230v for domestic consumption for example. The NEPA Plc is facing some difficulties in generating, transmitting and distributing the required voltage... Continue Reading

ABSTRACT Despite all attempt of the federal government to have not only an uninterrupted power supply for all cities in Nigeria, but a voltage that is inconformity with the recommended 220/230v for domestic consumption for example.  The NEPA Plc is facing some difficulties in generating, transmitting and distributing the required voltage... Continue Reading

ABSTRACT In the mechanical engineering department of institute of management and technology there are many machines but it is not all that is functioning well. This may airless as a   result of lack of maintenance which is a prove in the breakdown of the air conditioner. The quality and effectiveness of materials were mated very well as referred... Continue Reading

ABSTRACT In the mechanical engineering department of institute of management and technology there are many machines but it is not all that is functioning well. This may airless as a result of lack of maintenance which is a prove in the breakdown of the air conditioner. The quality and effectiveness of materials were mated very well as referred to... Continue Reading

CONSTRUCTION OF A PILOT MOTORISED MIXER A REPORT PRESENTED TO THE DEPARTMENT OF CHEMICAL ENGINEERING OF THE INSTITUTE OF MANAGEMENT AND TECHNOLOGY, ENUGU ABSTRACT A motorized mixer of 200 liters capacity was constructed to have the capability of mixing 200 liters of fluid during operation. The construction of the mixer involves the preliminary... Continue Reading

ABSTRACT This study examined the treasury single account and the performance of the selected MDAS Osun State. The primary source of data was used and questionnaires administered to selected ministries department and agencies in osun state. The data were analyzed using simple percentage and correlation and regression analysis were used to test the... Continue Reading

ABSTRACT  The study is focused on Inventory Management and Profitability. This is based on three main objectives which include, to establish the relationship between inventory Management and profitability in organizations, to establish the different tools of Inventory Management and lastly to establish the control measures or systems used in... Continue Reading

This Report describes the Design and Implementation of a I)atabase Management System  (DBMS) for Kim Town Council — a Local Government found in Wakiso I)istrict. Uganda  The System was developed to reduce the problems associated with the traditional file  based management system in the ‘town Council . using Microsoft Access and Visual ... Continue Reading

CHAPTER ONE INTRODUCTION 1.1 Background Information Electricity is a general term comprising of a variety of phenomena resulting from the presence and flow of electric charge. These include many phenomena, such as lightning,... Continue Reading

CHAPTER ONE INTRODUCTION 1.1Background Information Electricity is a general term comprising of a variety of phenomena resulting from the presence and flow of electric charge. These include many phenomena, such as lightning, static... Continue Reading

Abstract This project work centered on construction of 12V/10A solar charge controller that is needed in photovoltaic system to safely charge regulate and discharge of sealed lead acid battery through DC load. Solar charge controller is devices that regulate solar photovoltaic power and prevent overcharging, over discharging or overflow of current... Continue Reading

Abstract This project work centered on construction of 12V/10A solar charge controller that is needed in photovoltaic system to safely charge regulate and discharge of sealed lead acid battery through DC load. Solar charge controller is devices that regulate solar photovoltaic power and prevent overcharging, over discharging or overflow of current... Continue Reading

ABSTRACT This project involves a design of sun tracker for PV system. The circuit of the sun tracker is designed in such a way that it follows the track of the sun as it travel in the sky. The LDR are connected to noninverter input of the operational amplifier whose reference voltage resistor R1 and R2 is 10Ω each. At the output of the... Continue Reading

ABSTRACT The purpose of this project is to design and construct a car tracker system with code using GSM. A good car attracts everyone including thieves. When it comes to the safety of cars, car owners should be very careful. These days, the market is flooded with many safety devices. Typically, the most successful ones among all is the... Continue Reading

Abstract Over the years, we have had complaints of people copying someone else’s project directly as his/her own. Therefore, this project is aimed at solving the problem of copyright as identified during seminar presentations, project defense etc in schools. To solve the above mentioned problem, this application is developed to capture relevant... Continue Reading

ABSTRACT Online ATM Card request and delivery system with tracker is a system designed to assist bank customers and financial institutions computerize the process of customers requesting for Automated Teller Machines (ATM) cards and verifying the customers’ records with an embedded tracker to speed up the process considering the problems faced... Continue Reading

ABSTRACT Ntamiri River, Along Umuagwo axis were studied over a period of twelve months to determine the effects of detergent effluent discharges on the aspect of water quality of the river. Water samples from Points A, B and C were screened for microbiological analysis. The results... Continue Reading