Recent Chemical Engineering Project Topics and Materials (Page 7)

ABSTRACT   The kinetics and optimization of inhibitive action of leaves extract of pawpaw, Azadirachta indica (neem tree) and bitter leaf on corrosion of mild steel in acidic medium was studied by weight loss technique using central composite design of response surface methodology for optimization. The metal was analyzed using Atomic Absorption... Continue Reading

This study covers the evaluation of the synergistic effect of Datura stramonium leaves extract-Zn2+ in the corrosion inhibition of mild steel in well water. Varying effects of different concentrations of the extract and 5ppm of Zn2+ on the corrosion inhibition of the mild steel specimen will be determined in order to ascertain the synergistic... Continue Reading

ABSTRACT  Cassava  is  considered  as  a  potential  source  for  the  commercial  production  of  bioethanol because of its availability and low market price. It can be used as a basic source to support large-scale biological  production of  bioethanol using  microbial amylases. With  the progression  and advancement in... Continue Reading

ABSTRACT The need for effective and efficient means of oil extraction has been a concern in recent time. Hence, this study aimed at the oil extraction from Moringa oleifera seeds using the Microwave-Assisted extraction method. The extraction process was modeled using Response Surface Methodology (RSM). Also, the evaluation of Moringa oleifera oil... Continue Reading

                                                                      EXECUTIVE SUMMARY       This work presents the design of a plant that will produce 250000kg/yr of lindane from benzene, chlorine and water at high temperature and pressure using direct chlorination method.... Continue Reading

ABSTRACT Oil obtained from orange peels and velvet tamarind nut by solvent extraction (n-hexane and acetone) using the soxhlet extractor were investigated as feedstock’s to determine some of the suitable parameters such as iodine value, saponification value, specific gravity, density, acid value and free fatty acid value, and their percentage... Continue Reading

This project study was aimed at designing, fabricating, and evaluating the performance of a double effect evaporator, which was used to evaporate sugar syrup to be used for students’ demonstration. During the course of the study, the methods that were used comprised of the material balances, energy balances, and determination of the component... Continue Reading

Azeotropic distillation of ethanol-water mixture is accomplished by adding a volatile third component to the liquid which changes the volatility of one of the two components more than the other so the components are separated by distillation. The two components to be separated often have similar boiling point components which do or do not... Continue Reading

Abstract: The purpose of this study is the preparation of activated carbon using a suitable industrial sludge. The characterization of two types of industrial sludges showed that paper sludge was a better option over rice husk. The activated carbon produced from pyrolysis of paper mill sludge was chemically activated with various activating... Continue Reading

The project research entailed the production of high quality sealant  incorporating a local raw material for sealing holes and gaps in various materials  like metal and plastic. Two samples of acrylic sealants were produced, the first  samples which is the standard formulations involved the use of silica gel as a  major adhesion promoter and... Continue Reading

The effects of temperature, dielectric constant and catalysis in the kinetics of the oxidation –reduction reactions (involving electron transfer) of N-(2-hydroxy-ethyl) ethylenediammine- N’,N’,N’-Triacetatocobalt (II) by Cu 2+  cation were determined.  The dielectric constant was decreased from 63.05 to 43.18 and it was found that the... Continue Reading

ABSTRACT Pausinystalia yohmibe is a member of thefamilyRubiaceae. It is a valuable medicinal tree, distributed in evergreen closed canopy forests in West Africa.  It is traditionally used for treatment mostly on erectile dysfunction. This research was carried out to evaluate the immunomodulatory effect of ( Pausinystalia yohmibe) stem bark... Continue Reading

ABSTRACT The project research entailed the production of high quality sealant incorporating a local raw material for sealing holes and gaps in various materials like metal and plastic. Two samples of acrylic sealants were produced, the first samples which is the standard formulations involved the use of silica gel as a major adhesion promoter and... Continue Reading

ABSTRACT The investigation of nitrate adsorption onto Brachystegia spiciformis leaf powder from waste waters was performed. Characterization for the functional groups of the biomass before and after nitrate sorption as well as after desorption was done using an FTIR spectrophotometer. The effect of pH, contact time, dosage and initial nitrate... Continue Reading

ABSTRACT The physical properties of CNSL extracted by pyrolysis was studied using standard procedures. The physical properties of the CNSL studied and results obtained compared with other extraction methods (hexane extracted and decarboxylated) from literature are moisture content 4.1%, (6.40%, 3.2%), specific gravity 0.943 (0.926, 0.926)... Continue Reading

ABSTRACT A study on hydrogeochemistry and quality of shallow water and engineering properties of soil around the Adeta area in Ilorin was carried out based on data obtained from the field and laboratory. Groundwater flow, descriptive, and multivariant statistical analyses, piper, stiff and durov diagrams, as well water quality indices were used to... Continue Reading

ACKNOWLEDGEMENT     ABSTRACT   INTRODUCTION   OBJECTIVE     Natural Gas Dehydration   TEG   PROCESS DESCRIPTION     Modeling the Dehydration Process in Aspen HYSYS   Aspen Report of Absorber and Regenerator   Model Configuration   Run a Case Study to Identify   Possible Process Improvements   Graph and Results   Conclusion  ... Continue Reading

ABSTRACT  The analysis of macro and trace elements in selected snacks available in the Federal Capital Territory (FCT), Nigeria showed varied concentrations of the essential elements (Fe, Cu, Ni, Zn, Mg, Ca, K, Na, Mn, Cr) and non-essential elements (Pb, Cd, Hg, Co) in the fifteen different samples (Meat-pie, Bread, Cake, Doughnut, Scotched egg,... Continue Reading

ABSTRACT The two most common condenser tube problems faced by industrial users are internal tube fouling and tube failure. Fouling can have a major impact on the generating efficiency or the capacity of the condenser while the tube leaks or failure can seriously impact unit availability and reliability. Fundamental understanding of the root... Continue Reading

ABSTRACT An equipment design project was carried out to design an inverter (Bioreator) or the production of 100,00 metric tones per year of ethanol from sugar cane. An inverter is a part of process equipment used in ethanol production from sugar cane. While the rest process equipment include crusher, filter, centrifuge, fermented, distribution... Continue Reading

ABSTRACT As a result of modern development in Science and Technology, most of the large scale industrial used machine were now modernized to simple small and efficient machines. Some of these machines were either operated manually or the aid of electricity. For this reason, big metal sharpening machine was here reduced to simple term, which can be... Continue Reading

ABSTRACT The project dealt on the production of yam flour from yam chips. The yams were peeled and washed, 100grams samples coded sample A to G were subjected to two different drying conditions. Some were dried using the sun drying method while the others were dried through oven drying method kept at constant temperature of 500C, sodium... Continue Reading

ABSTRACT The effect of concentration of hydrochloric acid on hydrolysis of cellulose (saw-dust) to glucose was studied on this research project and the steps obtained to achieve this project involved treatment of saw-dust (cellulose) with different concentrations of the acid at constant temperature of 80° (350k) for 30mins. This was followed by... Continue Reading

This project study was aimed at designing, fabricating, and evaluating the performance of a double effect evaporator, which was used to evaporate sugar syrup to be used for students’ demonstration. During the course of the study, the methods that were used comprised of the material balances, energy balances, and determination of the component... Continue Reading

ABSTRACT The need for effective and efficient means of oil extraction has been a concern in recent time. Hence, this study aimed at the oil extraction from Moringa oleifera seeds using the Microwave-Assisted extraction method. The extraction process was modeled using Response Surface Methodology (RSM). Also, the evaluation of Moringa oleifera oil... Continue Reading