Most Read Agric Engineering Project Topics and Materials (Page 4)

ABSTRACT A prototype of hydraulically operated coconut oil extractor was designed and fabricated. The machine can be used for other oil-bearing seeds such as groundnut and palm kernel. The machine is made up of a plunger, ram disc, expression chamber, and electric heater. The extractor can process 10kg coconut per hour. An efficiency of 15% was... Continue Reading

ABSTRACT    The consumptive use of water assures all year round production of groundnut prone to the vagaries of weather and climate. This brought about the need to supply moisture that is naturally available through rainfall. The successful design of any irrigation system requires the knowledge of the consumptive use of water by the crop under... Continue Reading

ABSTRACT Shelling of groundnut pods (Arachis hypegea) by hand is tedious, laborious and unhygienic with low efficiencies. As a result farmer get low income due to amount of broken kernels and a lot of time is lost in the tedious shelling operation. To overcome this problem, pertinent parameters that influence shelling efficiency of pedal operated... Continue Reading

ABSTRACT In a study at KNUST weather station, the crop co-efficient values at initial, development, mid-season, and late season stages of ABONTEM MAIZE (hybrid variety) were determined as 0.42, 0.98, 1.05, and 0.32, respectively. These locally determined values of ABONTEM hybrid maize compared favourably with those recommended by FAO. The... Continue Reading

ABSTRACT Water released from ponds has greater concentrations of nutrients, organic matter and suspended  solids. This study investigated the physical, chemical and biological characteristics of fish pond waste water harvested from a source which served as the control, three different ponds and at the point of discharge in Afe Babalola University... Continue Reading

ABSTRACT  The motorized cassava peeling machine is a type of cassava peeling method that is adopted to reduce drudgery. In cassava peeling operations. This method, unlike the manual peeling method which consumes a lot of human power with subsequent low output produces or peels a large amount of cassava tubers within a small specific of time and... Continue Reading

ABSTRACT A 1.05 cubic metre capacity storage facility which is to increase the shelf life of stored vegetables as designed fabricated and tested. The equipment operates on the principle of evaporative cooling and increasing the relative humidity of the interior of the equipment. The door and the back wall were of particle board of 12mm thickness... Continue Reading

TABLE OF CONTENT i االية Dedication ii Acknowledgment iii Abbreviations iv Abstract vi viii الملخص Table of content x List of tables xiii List of figures xiv CHAPTER ONE 1 1.1 Introduction 1 1.2 Study scope 4 1.3 Problem descriptions 4 1.4 Study objectives 5 1.4.1 Main objective 5 1.4.2 Specific objectives 5 CHAPTERTWO 6 2.1... Continue Reading

Equipment development in Ghana to harvest oranges have over the years focused on simple units such as Garden tool, basket style picker etc. and common methods of harvesting oranges in Ghana are the use of manual branch shaking, manual pull with the hook stick. The effects leads to: Infestation of a bacteria called Alicyclobacillus when the fruits... Continue Reading

Abstract The study focused on the impact of petroleum industrial degradation on agricultural produce in Ilaje Local Government of Ondo state. Four research questions were developed in conformity with the purpose of the study. The study adopted survey research design. Questionnaires were administered to elicit information on crop productivity,... Continue Reading

ABSTRACT The project “microcontroller based intelligent traffic light system with automatic street light and warning light” was designed to tackle the traffic issues in the country so as to establish automatic traffic control and monitoring system with near perfection.  The project intelligent traffic light with automatic street light and... Continue Reading

ABSTRACT The microbiological and organic pollutants characteristics of umuosoko stream in ikwuano local government area, Enugu state, Nigeria were carried out. Twenty water samples were collected from four different parts of the river.  The pour plate technique was employed for the isolation of micro-organisms. Colonial morphology, Gram staining... Continue Reading

ABSTRACT Nigeria is the most populous Black race country in Africa and in the world with a total land area of 983,213 km2 occupied by over 160 Million people: The interaction of these millions of people with their environment has left indelible mark on the landscape. Urbanization, deforestation, flooding, desertification, over population and all... Continue Reading

ABSTRACT At the event of soil erosion, rain splash erosion supplies materials for subsequent transportation and entrainment. The influence of rainfall duration on splash produced from a loamy sand soil in Camp area of Abeokuta, Ogun State was studied in the laboratory using a laboratory rainfall simulator. The study area is always subject to... Continue Reading

Table of Content CHAPTER ONE INTRODUCTION 1.1       Background to the study 1.2       Solar Energy and Deep Cycle Battery 1.2.1    Solar Energy    1.3       Definition of Sprayer 1.4       Statement of the Problem 1.5       Aims and Objectives of the Project             1.6       Justification of... Continue Reading

 ABSTRACT Food extrusion is one of the earliest methods adopted by most industries to convert their paste raw material to a finished and desire shape based on their of an extrusion machine. Extrusion technique is a process in food processing technology that combines several unit operations including cooking. kneading. shearing. shaping and... Continue Reading

ABSTRACT The study of heavy metal deposition and accumulation in fabric production vicinity is of increasing interest because of the awareness that heavy metals present in soils may have negative consequences on human health and the environment. This study describes the assessment of heavy metal concentration in soils of fabric production vicinity... Continue Reading

ABSTRACT An evaporative cooling system was designed, fabricated and tested for the storage of fresh fruits and vegetables. The system's working principles is based on the principle of evaporation which causes a cooling effect to its surrounding. The system is an enclosed system and air is allowed to pass only through the pad, also a suction fan... Continue Reading

 ABSTRACT A solar dryer integrated with a simple bed rock was designed and constructed with locally available materials to dry tomatoes and pepper. The dryer was composed of solar collector, drying chamber, back up heater and airflow system all integrated together. The back-up heater provided alternative heating during cloudy weather conditions... Continue Reading

ABSTRACT This research study the concentration of certain toxic metals in street dust along road construction site and relate the finding to the standard control measure to determine the extent to which environmental uncontrolled process can pollute the environment. This study therefore investigate the Physicochemical parameters of street dust and... Continue Reading

ABSTRACT Flooding has been described as one of the most important environmental factors determining the distribution of salt maize plants. We studied the impact of five water levels on the germination and establishment of the invasive cord grass spartina denifora. Plant house experiment was carried out to determine the effects of time and depth of... Continue Reading

ABSTRACT The modification of a single-rotor cassava grater was undertaken. The singlerotor grater was modified into a double-rotor self-action grater and its performances evaluated by determining its throughput capacity and efficiency. The throughput capacity was determined by grating known quantities of cassava roots in three respective runs and... Continue Reading

The aim of this research is to determine the level of heavy metals contamination of agricultural soil and to reduce its concentration in the soil. Soil sampled at Inua Eyet Ikot, Mkpanak, Ibeno Local Government Area of Akwa Ibom State was analyzed to check for the initial heavy metal concentration of the soil. Poultry litter as a nutrient additive... Continue Reading

Petroleum-based products are the major   source   of   energy for   industry and daily life. The technology commonly used for the soil remediation includes mechanical,   burying,   evaporation, dispersion,   and washing. However, these Technologies   are   expensive   and   can   lead   to   incomplete   decomposition   of... Continue Reading

Abstract The study examined the Knowledge and attitude of rural women towards agroforestry practices in Chikun Local Government Area ( LGA) of Kaduna State. The objectives of the study were to describe the socio-economic characteristics of rural women, describe the types of agroforestry practices, examine the sources of information on... Continue Reading