THE DESIGN AND COSNTRUCTION OF 1000KWA STABILIZER A PROJECT PRESENTED TO THE DEPARTMENT OF ELECTRICAL/ELECTRONICS ENGINEERING

  • Type: Project
  • Department: Mechanical Engineering
  • Project ID: MCE0207
  • Access Fee: ₦5,000 ($14)
  • Pages: 44 Pages
  • Format: Microsoft Word
  • Views: 1.4K
  • Report This work

For more Info, call us on
+234 8130 686 500
or
+234 8093 423 853
ABSTRACT
Despite all attempt of the federal government to have not only an uninterrupted power supply for all cities in Nigeria, but a voltage that is inconformity with the recommended 220/230v for domestic consumption for example.  The NEPA Plc is facing some difficulties in generating, transmitting and distributing the required voltage stabilizer, which could be connected, to the main and then the load is in turn connected to it.
This automatic, AC voltage stabilizer has two major sections.
The transformer section, the control circuit unit the third section is the protective unit.
The output of this voltage stabilizer after series of test were performed on it  has a voltage 228 + 12 at an overall output power of 1.5 KVA.


TABLE OF CONTENTS
TITLE PAGE
CERTIFICATION
DEDICATION
ACKNOWELDGEMENT
TABLE OF CONTENTS
LIST OF TABLE 
ABSTRACT

CHAPTER ONE
1.0 INTRODUCTION
1.1 THE TRANSFORMER UNIT
1.2 THE CONTROL CIRCUITING

CHAPTER TWO
2.0 LITERATURE REVIEW
2.1 HISTORY OF THE PROJECT
2.2 THE POWER SUPPLY
2.3 THEORY OF TRANSFORMER
2.4 OPERATION OF THE TRANSFORMER
2.5 VOLTAGE TRANSFORMATION RATION 
2.6 TRANSFORMER LOSSES

CHAPTER THREE
3.0 THE CONTROL CIRCUITING
3.1 TRANSISTORS
3.2 RELAY
3.3 THE CONTROL UNIT
3.4 THE POWER SUPPLY UNIT
3.5 VOLTAGE DIVIDER

CHAPTER FOUR
4.0 DESIGN ANALYSIS
4.1 DESIGN FO A TRANSFORMER
4.2 DESIGN OF THE TRANSFORMER PROPER
4.3 CONTROL CIRCUIT DESIGN
4.4 DESIGN CALCULATION
4.5 PRINCIPLE OF OPERATION

CHAPTER FIVE
5.0 CONSTRUCTION AND TESTING OF THE TRANSFORMER
5.1 SHORT CIRCUIT TEST
5.2 TESTING OF THE TRANSFORMER 
5.3 OPEN CIRCUIT TEST
5.4 SUMMARY 
5.5 CONCLUSION
5.6 RECOMMENDATIONS
5.7 REFERENCES

THE DESIGN AND COSNTRUCTION OF 1000KWA STABILIZER A PROJECT PRESENTED TO THE DEPARTMENT OF ELECTRICAL/ELECTRONICS ENGINEERING
For more Info, call us on
+234 8130 686 500
or
+234 8093 423 853

Share This
  • Type: Project
  • Department: Mechanical Engineering
  • Project ID: MCE0207
  • Access Fee: ₦5,000 ($14)
  • Pages: 44 Pages
  • Format: Microsoft Word
  • Views: 1.4K
Payment Instruction
Bank payment for Nigerians, Make a payment of ₦ 5,000 to

Bank GTBANK
gtbank
Account Name Obiaks Business Venture
Account Number 0211074565

Bitcoin: Make a payment of 0.0005 to

Bitcoin(Btc)

btc wallet
Copy to clipboard Copy text

500
Leave a comment...

    Details

    Type Project
    Department Mechanical Engineering
    Project ID MCE0207
    Fee ₦5,000 ($14)
    No of Pages 44 Pages
    Format Microsoft Word

    Related Works

    ABSTRACT Despite all attempt of the federal government to have not only an uninterrupted power supply for all cities in Nigeria, but a voltage that is inconformity with the recommended 220/230v for domestic consumption for example.  The NEPA Plc is facing some difficulties in generating, transmitting and distributing the required voltage... Continue Reading
    ABSTRACT Despite all attempt of the federal government to have not only an uninterrupted power supply for all cities in Nigeria, but a voltage that is inconformity with the recommended 220/230v for domestic consumption for example. The NEPA Plc is facing some difficulties in generating, transmitting and distributing the required voltage... Continue Reading
    ABSTRACT Despite all attempt of the federal government to have not only an uninterrupted power supply for all cities in Nigeria, but a voltage that is inconformity with the recommended 220/230v for domestic consumption for example. The NEPA Plc is facing some difficulties in generating, transmitting and distributing the required voltage... Continue Reading
    CONSTRUCTION OF A PILOT MOTORISED MIXER A REPORT PRESENTED TO THE DEPARTMENT OF CHEMICAL ENGINEERING OF THE INSTITUTE OF MANAGEMENT AND TECHNOLOGY, ENUGU ABSTRACT A motorized mixer of 200 liters capacity was constructed to have the capability of mixing 200 liters of fluid during operation. The construction of the mixer involves the preliminary... Continue Reading
    ABSTRACT A research into the spiral growth of banks in Nigeria: manpower problems and solutions cannot be over-emphasized.  In pursuance of this investigation, the researcher formulated four research objectives.  Utilized library and sample survey techniques. Data were gathered through primary and secondary sources.  The data gathered were then... Continue Reading
    ABSTRACT This project presents a 40A maximum power point tracking solar charge controller. The MPPT charge controller tries to keep the voltage and the power stable. The MPPT charge controller will harvest more power from the solar array – it will adjust its input voltage to harvest the maximum power from the solar array and then transform this... Continue Reading
    ABSTRACT This project presents a 40A maximum power point tracking solar charge controller. The MPPT charge controller tries to keep the voltage and the power stable. The MPPT charge controller will harvest more power from the solar array – it will adjust its input voltage to harvest the maximum power from the solar array and then transform this... Continue Reading
    This Report describes the Design and Implementation of a I)atabase Management System  (DBMS) for Kim Town Council — a Local Government found in Wakiso I)istrict. Uganda  The System was developed to reduce the problems associated with the traditional file  based management system in the ‘town Council . using Microsoft Access and Visual ... Continue Reading
    ABSTRACT This project topic, Teleconference System, is one of the state of the art invention and need of many organizations for purpose of reducing cost, risk and time wastage. This project strives to bridge the geographical distance between two or more organization. Other importance of Teleconference includes: (i) For organizations, delivery... Continue Reading
    CHAPTER ONE 1.0     INTRODUCTION           One of the recent advances in the world of information technology is the rapid development of communication which has turned the world into a global village, we can send mails electronically (e-mail),... Continue Reading
    Call Us
    whatsappWhatsApp Us