- Page 466

This research work was arrived as the formulation and production of ethanol (ethyl alcohol) from the fermentation of palm wine. A fresh palm wine was ated which was obtained  from Emene in Enugu State.  The characteristics that was tested before and after fermentation were; specific gravity, refractive index and PH value of the... Continue Reading

The 20000 liters storage tank was constructed for effective storage and conservation of third with three (3) mild steel sheet of 14 gauge (2mm) thickness.  The construction started by marketing out 1½ (One and half) mild steel of 2440 Mm by 113Mmusing metal meter rule and critter the already market out dimension underwent cutting with a... Continue Reading

The hydrocyclone is a separating device used for the separation of dust particles from air, which has no moving component parts. This mechanism can also be defined as a system of winds circulating about a center of relatively low barometric pressure and on the earths surface, blowing inward in spiral form. This project is constructed for... Continue Reading

This research project is aimed at producing domestic powder and consequently, three different types of powder were produced, namely, simple face powder (pan-cake), medicated/Antiseptic powder (dristing   powder). During the various production Talcum, Zinc-oxide, Perfume, Menthol, Tragasan 300 DP (Triclosan), Mineral oil and colour... Continue Reading

This project work is on the bleaching of palm oil using activated charcoal. The charcoal used for this work was made from pieces of animal bone by carbonization method.  It was then activated into two different samples.  Firstly, the basic sample was activated using anaphoric acid (H2 s04) while the other was activated by just heating... Continue Reading

The major aim of this project research work is to produce emulsion paint from locally sourced pigment & extenders. The materials used for the production was of local source. The major raw materials used for the production of the emulsion paint: water, titanium iv oxide, calcium carbonate, kaoline, calgon, natrosol, biocide P.V.A, ammonia,... Continue Reading

This research work shows us the potential benefits we may obtain from the computerization of the out-patient information system of the Hansa Clinic Enugu. The out-patient department otherwise called OPD is a place where the out-patient that is patients that receive treatment at the clinic without staying overnight, wait for the doctors to... Continue Reading

ABSTRCT The experiment was carried out to analyze comparatively coal and coconut activated carbon.  The coal sample used in bituminous and with density of 1300kg 1m3 tile coconut shell was used. The coal and coconut shell was first activated using phosphoric acid.  The activated coal and coconut carbons mere then used to bleach palm oil after... Continue Reading

The table constructed has a horizontal top with vertical support or legs to raise it from the ground. The aim of the table constructed is for the preservation and storage of useful materials like books, files, computers, result booklets, electronics, office equipments and some vital home equipment etc. However, before the construction of... Continue Reading

INTRODUCTION The most common type of heat exchanger used in industry contains a number of parallel tubes enclosed in a shell and is thus called a shell and tube heat exchanger.  These heat exchangers are employed when a process required large quantities of fluid to be heated or cooled.  Due to their compact design, these heat exchangers contain... Continue Reading

The refurbishment of the fluid flow demonstration unit was carried out in the Chemical Engineering pilot plant laboratory of the Institute of Management and Technology Enugu. The refurbishment process was carried out to ensure adequate functioning of the unit, to allow the continuous use of equipment in the pilot plant, so that student... Continue Reading

A paint mixer is defined as a pattern constructed for the production (mixing) of paint manually.  The method of fabrication of the paint mixer involved a preliminary computation of the dimensions of the standard mixer in relation to the dimension of the reacting vessel in which they will be used in marking out, cutting out to sizes,... Continue Reading

This project “production of plane mirror using local raw material” is meant to study the possibility of producing plane mirror using sand rich in silica as its major local raw material. Plane mirror is produced by casting one side of a sheet glass.  Presently in Nigeria, sheet glass is not used easily produce and as such, the local... Continue Reading

This project was carried out to ascertain whether the local palm oil met the required standard.  The analytical test carried out include the free fatty acid test the acid value, iodine value moisture, content, saponfication value, peroxide value, specific gravity, colour and viscosity. The specific gravity of the oil sample was... Continue Reading

This report aimed at determining the presence and removal of mercaptan sulphur in kerosene using colour indicator method.  It is known that impurities such as free sulphur, sulphur dioxide, marketers, finding materials etc. are found in petroleum products. Consequently, absorbents like molecular sieve, calcium oxide and even activated... Continue Reading

The general approach to any design of a process plant involve an advanced network of chemical engineering process. Absorber is a process plant or equipment that are used in the purification of gas or separation of unwanted gas from the mixture when it comes in contact with the liquid. In this models mass transfer reaction and equilibrium... Continue Reading

Note: This work contains only the schematic diagram/design of a biogas plant Biogas typically refers to a mixture of gases produced by the breakdown of organic matter in the absence of oxygen. Biogas can be produced from regionally available raw materials such as recycled waste. It is a renewable energy source and in many cases exerts a very... Continue Reading

INTRODUCTION The separation operation of drying converts a solid, semi-solid or liquid feedstock into a solid product by evaporation of the liquid into a vapor phase via application of heat. In the special case of freeze drying, which takes place below the triple point of the liquid being removed, drying occurs by sublimation of the solid phase... Continue Reading

In this research project, the various nail were subjected to six environments so as to check the effect of the environments on corrosion of the nails. Two sets of nails were used; normal nail and concrete nail.  Six of each type while the other not coated. The research was carried out in the physical chemical laboratory of the institute... Continue Reading

This research was carried out with the sole aim of monitoring interface in the transportation of petroleum pipeline products and the analysis of this product from Enugu depot.  In the research it was observed that product contaminates each other if interface was not properly monitored and cut at the appropriate time. The three major... Continue Reading

This research project was aimed at optimization of adsorption conditions for removal of methylene blue dye using conventionally activated hamburger seed shell.  The activated carbon was first prepared from the hamburger seed shell through carbonization at a temperature of 8000C for 2 hours followed by activation using conc. KOH 9m as... Continue Reading

Water is one of the most important substances on earth. All plant and animals must have water to survive. If there is no water there would be no life on earth. Disease causing germs and chemicals find their way into water supplies when this happens, the water becomes polluted. The principal objective of this research work is to asses the... Continue Reading

It is proposed to design a process plant that will control nitrogen oxide emission from a plant that is producing 90wt% nitric acid of 30,000 tonnes of nitric acid. This capacity is based on 8000hours of operation per year i.e. 330 days. It is proposed that this plant will be located in any location where there is substantial release of... Continue Reading

Plastic and Rubber materials have become the corner stone of our lives, so it leads to generation of huge quantity of waste. These waste materials are either mixed with municipal solid waste or dumped in an open area leading to increase in the area covered under waste land. Plastic and rubber waste, if not recycled is either land filled... Continue Reading

This project was carried out to ascertain whether the local palm oil met the required standard.  The analytical test carried out include the free fatty acid test the acid value, iodine value moisture, content, saponfication value, peroxide value, specific gravity, colour and viscosity. The specific gravity of the oil sample was... Continue Reading