Electrical Engineering Project Topics and Materials (Page 4)

Showing 76 - 100 of 530

76) DESIGN AND CONSTRUCTION OF MICROCONTROLLER BASED INTELLIGENT TRAFFIC LIGHT CONTROLLER

ABSTRACT:  A traffic light system is an electronic circuitry designed and configured to control the flow of the traffic (vehicular and human) at roads intersection without the physical presence of a traffic warden. This is made possible through the help of a signaling device which is mounted at roads intersection. It is achieved using... Continue Reading

77) DESIGN AND CONSTRUCTION OF A MICROCOMPUTER BASED SECURITY SYSTEM WITH INTRUDER POSITION DISPLAY

Abstract: This project is aimed to implement a  system that will automate the security system of a given area. It ensures that  the user is alerted each time an intruder encroaches a secured position in an  area of application through the sounding of alarm.(Siren) More so, information  about the intruder’s position will also be made noticed... Continue Reading
  • Type:Project
  • ID:ELE0450
  • Pages:100

78) DESIGN AND CONSTRUCTION OF AN ELECTRONIC ATTENDANCE STAFF REGISTER (EAR).

Abstract: The effect of science and technology had led to the development of computers and its application to various production fields. EAR is a new type of attendance software. It is aimed at eliminating the old method of keeping records of staff attendance on daily bases, through electronic means. TABLE OF CONTENTS:   CHAPTER ONE... Continue Reading

79) DESIGN AND CONSTRUCTION OF A MICRO CONTROLLER BASED FAST FOOD MENU TABLE WITH DOT MATRIX DISPLAY BOARD.

  ABSTRACT: This project design is simply used to display the items demanded by each customer on the table. Each table has four buttons for Rice, beans, amala and akpu, and each of the buttons are connected to the processor. The customers on every table presses the button with the label of the item he or she needed. Then, a screen in the... Continue Reading

80) WIRELESS BASED TSUNAMI AND EARTHQUAKE WARNING SYSTEM

ABSTRACT Natural Disasters or Natural Calamities, whatever you name it has for long been the most dreaded cause of mass destruction and loss of human lives, wealth and property. It destroys the beauty of earth, lives of humans and leave behind no traces of existence. It’s so severe in its approach that millions and billions of people and... Continue Reading
  • Type:Project
  • ID:ELE0447
  • Pages:108

81) AUTOMATIC DOOR OPENING SYSTEMS USING IR SENSORS

 INTRODUCTION: The main objective of this project is to develop an Automatic  Door opening system using IR sensors which will reduce the need of manual labor. plays a very important role in domestic applications. The elimination of manual supervision adds up as an additional advantage for its ... Continue Reading

82) DESIGN AND CONSTRUCTION OF DIGITAL ELECTRONICS TRAINING SYSTEM

ABSTRACT Digital electronics is now used in all fields of electronics from computers to digital phones and most industrial machines and motor vehicles. When prototyping digital electronic circuits, specific digital input signals are required to design the digital circuit. To accomplish this task, a teaching device known as a “Digital... Continue Reading

83) DESIGN AND CONSTRUCTION OF AN OBSTACLE DETECTION SYSTEM FOR THE VISUALLY IMPAIRED

ABSTRACT This project work is focused on the design and construction of obstacle detection system for the visually impaired. This paper reports on a study that helps visually-impaired people to walk more confidently. The study hypothesizes that a smart walking stick that alerts visually-impaired people over obstacles in front could help them... Continue Reading

84) DESIGN AND CONSTRUCTION OF UNINTERRUPTABLE POWER SUPPLY

ABSTRACT Since one of the problem of our country Nigeria has been inconsistency power supply, as many business center today depend on computer controlled system, high technology equipment and needs a precise and constant power supply.  This  work is focused on the design and construction of uninterruptable power supply  due to the rising... Continue Reading

85) THE DESIGN OF FOUR POLE DC MOTOR WITH THE APPLICATION OF WHEELCHIR

Literature Review More peer-reviewed scientific studies on large-scale solar energy developments and operations are needed to adequately assess their impact (: solar electricity handbook September 2, 2013 )  Table of Contents i.Title Page……………………………………………………………………………… 1 ii.Table of... Continue Reading

86) CONSTRUCTION OF A BLENDER

ABSTRACT Blender is an electric machine for size reducing soft food or liquid mixture.  Blender is some time called liquidizer consists of a glass jar or jug containing a steel blade assembly at the base driven by a small electric motor. Construction of blender was done based on the principle of size of reduction using electric motor as the major... Continue Reading

87) DESIGN AND CONSTRUCTION OF ELECTRIC OVEN

ABSTRACT An oven is a heated enclosure for heating, baking or drying. An electric oven is a heating device used to heat materials to high temperature when electric current is passed through a high resistance heating element (coil or plate). Electric ovens can fine their application in many fields and area of discipline like factories, research... Continue Reading

88) CONSTRUCTION OF POWER OUTAGE ALARM

ABSTRACT This work is a power supply monitoring device that triggers a buzzer when the mains supply cuts off. Thus a diode (bridge rectifier diode) was used to convert the AC voltage to DC voltage and the 240v/12v AC mains power transfer was used with a bridge rectifier for rectification and a 470Nf filter capacitor C1 for the smoothing of the... Continue Reading

89) DESIGN AND CONSTRUCTION OF A SINGLE PHASE MICROCONTROLLER BASED AUTOMATIC CHANGEOVER WITH GENERATOR STARTER

ABSTRACT Most industrial and commercial processes are dependent on electrical power. Power failure or outage in general does not promote development in public and private sectors. The investors do not feel secure to come into a country with constant or frequent power failure. This limits the development of industries.In addition there are... Continue Reading

90) SINGLE PHASE AUTOMATIC CHANGEOVER

ABSTRACT The main aim of any electric power supply in the world is to provide uninterrupted power supply at all times to all its consumers. Although, in developing countries, the electric power generated to meet the demands of the growing consumers of electricity is insufficient, hence power instability and outage.  Power instability or outage in... Continue Reading

91) ANALYSIS OF POWER QUALITY PROBLEMS IN SOLAR POWER DISTRIBUTION SYSTEM

  TABLE OF CONTENTS DECLARATION    i DEDICATION    ii COPYRIGHT    iii ACKNOWLEDGEMENTS    iv ABSTRACT    v LIST OF TABLES    vii LIST OF FIGURES    viii LIST OF ACCRONYMS AND ABBREVIATIONS    ix OPERATIONAL DEFINITION OF TERMS    x INTRODUCTION    1 1.0 Background of the Study    1 1.2 Solar Power System    2... Continue Reading

92) DESIGN AND CONSTRUCTION OF AUTOMATIC POWER CHANEOVER SYSTEM

ABSTRACT Power interruption and failure does not promote development. Investors and private organization do not feel secure to establish a business in a country with constant or frequent power failure. Power interruption limits the development of industries, commerce, businesses and seriously effects the economic development of any nation. There... Continue Reading

93) MICROCONTROLLER BASED DOT MATRIX ADVERT DISPLAY SYSTEM

  TABLE OF CONTENTS   CHAPTER ONE (1)  INTRODUCTION 1.0    BACKGROUND 1.1    OBJECTIVE OF THE PROJECT DESIGN 1.2    SCOPE OF THE PROJECT 1.3    THE PIC MICROCONTROLLER 1.4    THE HARDWARE 1.4.1    The Circuit Components 1.4.2    Screen 1.5    POWERING THE PROJECT 1.6    PROJECT REPORT ORGANIZATION CHAPTER TWO... Continue Reading

94) DIGITAL FREQUENCY COUNTER

Test and measuring instruments are an indispensable in any electronics research, development or design environment. Test and measuring instruments can be categorized as digital and analog.   Analog systems change their signal output  linearly with the input and can be represented on a scale by means of a  pointer. In the other hand, digital... Continue Reading

95) MICROCONTROLLER BASED DIGITAL CALENDAR

ABSTRACT Microcontroller has actually revolutionized the world economy as virtually every facet of life is benefiting in one way or the other on the great impact of  Microcontroller  today.Meanwhile,the technology of Microcontroller has gone long way of which monitoring and interfacing of real world devices to Microcontroller systems can not be... Continue Reading

96) AUTOMATIC RAIN SENSING WIPER SYSTEM

ABSTRACT The world today is moving ahead at a very fast pace. Some of the very common examples of fast moving objects are aeroplanes, high speed cars and many more. In our everyday life we come across many fast moving vehicles and so it is very important to measure the speed of these vehicles.This is an era of automation where it is broadly... Continue Reading

97) 12 VOLTS AUTOMATIC BATTERY CHARGING SYSTEM

ABSTRACT This design is aimed at providing a system that has the capability of recharging batteries after use. The design is to incorporate an auto charging cut off circuit that operates when the battery is fully charged to avoid damaging the device and also a low voltage circuit which prevents the system from damage should in case the battery... Continue Reading

98) MICROCONTROLLER BASED AUTOMATIC HAND DRYER SYSTEM

ABSTRACT This system “” comprises of many modules which are: The Sensor/Input Unit, Microcontroller Unit and the Output Interface. The sensor detects when the hand approaches the nozzle. Once the approaching hand is detected, the hand dryer produces a very hot to dry the hand as well as... Continue Reading
  • Type:Project
  • ID:ELE0429
  • Pages:104

99) DESIGN AND CONSTRUCTION OF A COMPUTER BASED CONTROL OF ELECTRICAL APPLIANCES

INTRODUCTION This project presents the design and construction of a computer based program used to control office  appliance. It is based on a Graphic user interface (GUI) programming language (Visual  Basic 6.0), Parallel Port Interactive Mode, Opto-Coupler Isolation of the  computer from the appliance to prevent damage to the system should a... Continue Reading

100) DESIGN AND CONSTRUCTION OF AN AUTOMATIC CHANGEOVER SWITCH

This work is based on automatic changeover switch. If there is failure in main power supply it will automatically change to auxiliary power supply such as generator. This project is based on electromechanical changeover with the use of magnetic contractors, relay,and circuit breaker. ... Continue Reading
Need help with your Electrical Engineering Project Topic? Click here to request assistnce or reach us on + 234 813 0686 6500
whatsappWhatsApp Us