Most Read Electrical Engineering Project Topics and Materials (Page 11)

Showing 251 - 275 of 530

251) DEVELOPMENT OF A NOVEL ALGORITHM FOR VOLTAGE STABILITY ASSESSMENT USING SYNCHROPHASORS

ABSTRACT As a result of recent increases in demand for electric power, utility transmission systems have been forced to operate under stressful conditions, often close to instability limits. Efforts to construct new transmission lines or enlarge networks are limited due to economic and environmental constraints. According to U.S. Department of... Continue Reading

252) THE ROLE OF SATELLITE NETWORK IN FUTURE 5G WIRELESS NETWORKS

ABSTRACT The document outlines an investigation done in order to study Fifth Generation (5G) systems and to identify a role that satellite systems will play in contribution to the many advanced and diverse demands on existing telecommunication networks. This next generation network is a build-up and phenomenal improvement in wireless communication... Continue Reading

253) SINGLE PHASE AUTOMATIC CHANGEOVER

ABSTRACT The main aim of any electric power supply in the world is to provide uninterrupted power supply at all times to all its consumers. Although, in developing countries, the electric power generated to meet the demands of the growing consumers of electricity is insufficient, hence power instability and outage. Power instability or outage in... Continue Reading

254) DESIGN AND CONSTRUCTION OF A 60AMP THREE PHASE AUTOMATIC CHANGE OVER SWITCH.

ABSTRACT The design and construction of a 60A, 3-Ф automatic power changeover from public utility supply to generator and vice versa was aimed at providing a useful system for use in our homes or offices. The system was achieved with a 66A 3-Ф contactor, 100mA transformers and relays. The system turns on a generator when the public utility... Continue Reading

255) CONSTRUCTION OF EQUIPMENT FOR DEODORIZING KEROSENE

ABSTRACT The motive of this project is to construct equipment for deodorizing kerosene, hence the smell of kerosene is totally eradicated. The equipment was constructed with flat sheet plates of a desired standard, the dimension and the truncated parts were coupled and welded in order to fasten the parts together. The material was selected to... Continue Reading

256) E-ACADEMIN: A WEB BASED APPLICATION FOR RE-ENGINEERING ACADEMIC ADMINISTRATION

ABSTRACT Most organizations are deploying e-business solutions because of its numerous advantages, such as, increased productivity, reduced transactions costs, wider coverage and increased speed to market. The present academic offices in developing countries still use paper-based approach for most of their activities. Data and information are... Continue Reading
  • Type:Project
  • ID:ELE0252
  • Pages:169

257) DESIGN AND CONSTRUCTION OF A TWO LANE TRAFFIC LIGHT

ABSTRACT The project work is on the design and construction of automatic two lane traffic light control. This system is based on digital electronics. It employs an astable multivibrator which is the clock generator that sends the clock into a time sequencing generator using a decade counter with ten (10) decodes output that has it’s binary... Continue Reading

258) DESIGN AND CONTRUCTION OF AUTOMATIC PHASE SELECTOR

Abstract As the growing population of human race widens the gulf between energy supply and energy demand, the imbalance in energy availability sent researchers into excavating for a way of settling this age long squabble. A lasting solution is vested on alternative use of the renewable energy source, a project that is yet to be widely applied.... Continue Reading

259) DESIGN AND SIMULATION OF TELEMETRY LINK AND POWER SYSTEM FOR ABT-18 UNMANNED AERIAL VEHICLE

ABSTRACT The Airbeetle-18 unmanned Aircraft is an Aircraft design for the purpose of surveillance following the fact that the parent Airbeetle-18 has almost reached the end of its life time. Hence, there is need to convert it to an unmanned aircraft in other to extend its service life time. A comprehensive literature review was carried out on... Continue Reading
  • Type:Project
  • ID:ELE0207
  • Pages:135

260) INVESTIGATION ON HEAT DISSIPATING PROPERTIES OF ELECTRONIC COMPONENTS WITH THE AIM TO DETERMINE THE CORRECT SIZE OF HEAT SINK

Research and optimization of cooling of electronic components using heat sinks becomes increasingly important in modern industry. Numerical methods with experimental real world verification are the main tools to evaluate efficiency of heat sinks or heat sink systems. In this research, the physical problems associated with heat removal of... Continue Reading

261) CONSTRUCTION OF A 12 VOLT BATTERY CHARGER

ABSTRACT The battery which has always serve as a sources of electrical current has in the past been invalid and inmost cases seen as monument after implicating as battery wound have to be brought over and over again the implicating has been that of lot of money is been spent for this purpose we give appraise for the advancement of technology which... Continue Reading

262) CAR SECURITY CONTROL USING RFID

ABSTRACT Security Car Using RFID System. This project is designed to enhance vehicle safety systems available. Thus, this project consists of some combination of equipment and components to create a car security system that meets the security features and use more advanced. RFID (Radio Frequency Identification) is the most reliable way to... Continue Reading

263) THE CONSTRUCTION OF A 3-PHASE MOTOR OPERATION INDICATOR

 ABSTRACT  The construction of a 3-phase motor operation indicator exposes the techniques and skills employed in the construction of complex electrical circuit. The combination of contactors overload relay and other component to achieved the desired goal is diagrammatically and descriptively treated of practical knowledge     TABLE OF CONTENTS... Continue Reading

264) INVESTIGATING THE OPTICAL AND MECHANICAL PROPERTIES OF PHOSPHORESCENT SILICONE RUBBER AS A COMPLEMENTARY SOURCE OF LIGHTING

The household lighting cost accounts for 10% of the electric bill, changing the light bulbs effectively can reduce the long term energy costs significantly. In Nigeria, where less than one percent of the population has access to 24 hours of interrupted power supply there is a need for a complementary, renewable source of light which provides... Continue Reading

265) MODELING OF CORE LOSS IN INDUCTION MACHINE

Abstract Induction machine account for about 60percent of the electrical consumption in industrial countries; hence a huge energy savings could be achieved by even a small increment in the machine efficiency. Improving the designs of induction machines requires accurate quantification of the machine losses. A significant portion of the losses in... Continue Reading

266) THE CONSTRUCTION OF TWO FEET ELECTRONICS FLUORESCENT LAMP

ABSTRACT   Engineering being the mother every technology cannot be neglected. Without practical application in the field of engineering. The student and their tutors are impotent. The lucrative nature of engineering depends on the technical know-how of the engineer. The purpose of practical project to students is to help them acquire practical... Continue Reading

267) DESIGN AND CONSTRUCTION OF AN INVERTER TYPE ARC WELDING MACHINE

Abstract Welding is a way of heating pieces of metal using electricity or a flame so that they melt and stick together. It can simply be defined as the process of joining two or more pieces of metal to make the act as a single piece. This is often done by melting the work pieces and adding a filler material to form a pool of molten material that... Continue Reading

268) CONSTRUCTION OF 500W12VINVERTER CHARGER

ABSTRACT An inverter is a system which is capable of converting DC voltage from a battery into AC voltage. The Inverter constructed converts 12V dc to 220V Ac. It consists of an oscillator section using 8V dc to produce 50Hz sine wave. The sine wave is amplified by Tip 41 and used to drive IRPF 250 MOSFET power transistors capable of delivering... Continue Reading

269) 12 VOLTS AUTOMATIC BATTERY CHARGING SYSTEM

ABSTRACT This design is aimed at providing a system that has the capability of recharging batteries after use. The design is to incorporate an auto charging cut off circuit that operates when the battery is fully charged to avoid damaging the device and also a low voltage circuit which prevents the system from damage should in case the battery... Continue Reading

270) CONSTRUCTION OF C.D SPEAKER DOUBLE MAGNET OF SIX AND HALF INCHES DIAMETER 150 WATTS 18 IMPEDANCE

ABSTRACT The project work on construction of loud speaker involves some critical research and study concerned electromagnetic induction effect in transducers like loud speaker and its associated parameter required to chose a very good one this parameters are the power rating of loud speaker and the coil. The sizes were also put into consideration.... Continue Reading

271) CONSTRUCTION OF MICROCONTROLLER BASED VEHICLE SPEED ALARM.

ABSTRACT The project is based on Construction of microcontroller vehicle speed alarm system which automatically warns the driver by activating a panic alarm which is triggered on when the driver exceeds the speed limit set in the system which also stops the alarm when the speed is reduced below the set speed limit. A speedometer system is used to... Continue Reading

272) STORE MANAGEMENT SYSTEM TO JIT

Abstract My project is to improve JIT store management system from manual to automated system.   Which is used to avoid problem faced by store keeper when store material manually. Store is the place where many varieties of materials are kept for the purpose of work. So at a time of storage is hard to write in document all material listing by... Continue Reading

273) DESIGN AND CONSTRUCT A MULTIREMOTE CONTROLLER USING INFRA-RED MODE OF TRANSMISSION

ABSTRACT Microcontroller based remote control system is a project design of a system that uses infra red transmission and reception principle to switch on or off other appliances. It is a wireless mode of switching appliances to a desired state. When a number is pressed in the transmitter section, the receiver section decodes the signal and... Continue Reading

274) DESIGN AND CONSTRUCTION OF 20WATTS WIRELESS PUBLIC ADDRESS SYSTEM

ABSTRACT It has become inevitable that there would be communication and due to the inherent limitation of the human voice, the public address system came to being. A public address or “P.A SYSTEM” is an electronic amplification system with a mixer ,amplifier and loudspeakers, used to reinforce a given sound , e.g a person making a speech,... Continue Reading

275) DESIGN AND IMPLEMENTATION OF AUTOMATIC SECURITY LIGHTING SYSTEM FOR ATBU YELWA CAMPUS.

ABSTRACT This project work has covered the design of an automatic security lighting system for ATBU, Yelwa Campus. Requirements for illuminance, type of fittings, power dissipation and mounting height were put into consideration. An electronic model of the campus was built with the streets outlined and lamps fixed at positions along the streets... Continue Reading
Need help with your Electrical Engineering Project Topic? Click here to request assistnce or reach us on + 234 813 0686 6500
whatsappWhatsApp Us