Industrial And Production Engineering Project Topics and Materials

Showing 1 - 11 of 11

1) THE ROLE OF INFORMAL SECTOR IN EMPLOYMENT GENERATION IN ILORIN, KWARA STATE NIGERIA

                        Abstract This research work examined the role of informal Sector in employment generation in  Ilorin, kwara state Nigeria. The study made use of primary data obtained from 100  respondents from Ilorin West Local Government in kwara state through the copies of  questionnaire administered. The data collected... Continue Reading

2) EVALUATION OF THE EFFECTIVENESS OF QUALITY CONTROL IN DANGOTE CEMENT PLC

   v  ABSTRACT  The project evaluates the effectiveness of quality control  in Dangote Cement PLC, Ibese  Ogun  State,  Nigeria.  Limestone,  shale  and  laterite  samples  were  from  the  mines  to determine their right grade as well as their mixing proportion. Also samples were taken from kiln feed and the final stage of... Continue Reading

3) ELECTRODIALYSIS

this paper shows separation technique with research.... Continue Reading

4) LOCAL SOURCING OF RAW MATERIALS FOR THE MANUFACTURE OF MANUAL METAL ARCWELDING ELECTRODE: A CASE FOR LOCALLY PRODUCED STEELWIRE IN NIGERIA

ABSTRACT Since early 1995 when pressure was mounted on the Raw Materials Research and development council in Nigeria, with a  view to sourcing wire, flux and binder locally, little or no success has been recorded. As at 1998,allthe raw materials including core wire for electrode manufacture in Nigeria were still being imported. The aim of this... Continue Reading

5) EFFECT OF SUGGESTOPEDIA INSTRUCTIONAL METHOD ON ACADEMIC ACHIEVEMENT, INTEREST AND RETENTION OF METAL WORK STUDENTS OF TECHNICAL COLLEGES IN LAGOS STATE

ABSTRACT The study was carried out to determine the effect of suggestopedia instructional technique on academic achievement, interest and retention of metalwork students of technical colleges. Six research questions were answered while nine null hypotheses formulated were tested at a 0.05 level of significance. The study adopted a... Continue Reading
  • Type:Project
  • ID:IPE0007
  • Pages:191

6) REVERSING CENTRIFUGAL PUMPS AS ALTERNATIVE TO CONVENTIONAL TURBINES FOR MICRO HYDROPOWER: A REVIEW

ABSTRACT This paper presents the operation of centrifugal pumps as turbines for micro hydropower application. Block diagrams are used to present components required from intake chamber to hydropower plant and their electrical energy mechanism for micro hydropower system. A comparison of operational parameters of pump as turbine and conventional... Continue Reading

7) GENETIC ALGORITHM APPROACH FOR OPTIMISATION OF SILICA EXTRACTION FOR MICRO-CRYSTALLINE SILICON PRODUCTION

Solar collectors mainly produced from poly-crystalline (P-Si) and micro-crystalline silicon (µ-Si) are in high demand in Nigeria due to persistent power challenges. The silicon are mostly imported and µ-Si is preferable due to its low cost. The µ-Si is extracted from Rice Husk (RH). However, the procedure of setting its optimal process... Continue Reading
  • Type:Project
  • ID:IPE0005
  • Pages:210

8) DEVELOPMENT OF A GENERALISED SOLUTION FOR THE PERFORMANCE MEASURES OF QUEUING SYSTEMS

ABSTRACT This study developed computer software with the capacity to provide a generalized solution to queuing problems involving laborious, time consuming and complex mathematical approach of evaluating the performance measures of queuing systems when it was applied in the analysis of the six (6) fundamental performance measures of thirty (30)... Continue Reading
  • Type:Project
  • ID:IPE0004
  • Pages:147

9) EVALUATION OF THE EFFECTIVENESS OF QUALITY CONTROL IN DANGOTE CEMENT PLC

v ABSTRACT The project evaluates the effectiveness of quality control in Dangote Cement PLC, Ibese Ogun State, Nigeria. Limestone, shale and laterite samples were from the mines to determine their right grade as well as their mixing proportion. Also samples were taken from kiln feed and the final stage of cement production. The compressive... Continue Reading

10) LOCAL SOURCING OF RAW MATERIALS FOR THE MANUFACTURE OF MANUAL METAL ARCWELDING ELECTRODE: A CASE FOR LOCALLY PRODUCED STEELWIRE IN NIGERIA

ABSTRACT Since early 1995 when pressure was mounted on the Raw Materials Research and development council in Nigeria, with a  view to sourcing wire, flux and binder locally, little or no success has been recorded. As at 1998,allthe raw materials including core wire for electrode manufacture in Nigeria were still being imported. The aim of this... Continue Reading

11) THE ROLE OF INFORMAL SECTOR IN EMPLOYMENT GENERATION IN ILORIN, KWARA STATE NIGERIA

                        Abstract This research work examined the role of informal Sector in employment generation in  Ilorin, kwara state Nigeria. The study made use of primary data obtained from 100  respondents from Ilorin West Local Government in kwara state through the copies of  questionnaire administered. The data collected... Continue Reading
Need help with your Industrial And Production Engineering Project Topic? Click here to request assistnce or reach us on + 234 813 0686 6500
whatsappWhatsApp Us