Project Request: Preparation of liquid detergent using sulphactants

More Details
Department: Chemical engineering
Level :
Status: APPROVED
Delivery :Soft Copy

Related Works

ABSTRACT  The aim of this research work is special formulation of liquid detergent for car wash. In manufacturing liquid detergents, selection of raw materials is been considered as the first step. These raw materials were selected on the basis of several factor such as human and environmental safety, cost compatibility with other ingredients and... Continue Reading
ABSTRACT The effect of liquid flow rate, pipe size (diameter) and pipe orientation (inclination) on liquid hold-up was investigated. Liquid flow rate between 500 STB/day and 5000 STB/day was studied. An oil of 25˚API at an average temperature of 175˚F, a gas gravity of 0.65, water cut of 25% with water gravity of 1.07 and containing no free gas... Continue Reading
ABSTRACT This research project was carried out principally for the production of liquid and vapourized perfumes from local raw materials.  The local raw material were subjected to various processing conditions in order to obtain purified perfume.  The methods generally used in this work include expression steam distillation and solvent... Continue Reading
DESCRIPTION The Liquid soap business plan is a comprehensive business plan that will assist you with all the needed ideas and plans to start a successful Liquid soap production business. The Liquid soap business plan shows you liquid soap making procedure and ingredients and in raising capital for your liquid soap business. liquid soap making... Continue Reading
ABSTRACT A project was carried out to produce high quality liquid air refreshner for domestic uses. The project was carried out using the following apparatus. Beakers (250ML), one conical flask, hydrometer, thermometer, two – 5ml of measuring cylinders, one reactor (plastic reactor), stirrer,... Continue Reading
ABSTRACT Lemon grass (Cymbogon citratus) is an abundant, locally available plant. In this work, essential oil was extracted from it using solvent extraction method.  In this work two methods of extraction was used, solvent extraction and enfleurage methods were used to extract essential oil from lemongrass. Solvent extraction method yielded 2.08%... Continue Reading
ABSTRACT A project was carried out to produce high quality liquid air refreshner for domestic uses. The project was carried out using the following apparatus. Beakers (250ML), one conical flask, hydrometer, thermometer, two – 5ml of measuring cylinders, one reactor (plastic reactor), stirrer, weighing balance. The chemicals used in the... Continue Reading
ABSTRACT This research work is a detailed study on preparation of cleansing cream. The aim is to prepare cleansing cream of better quality than the available ones in the market. The study explores the work done by some eminent scholars in connection with cream and preparation of cleansing cream. Cream can be defined as an article intended to be... Continue Reading
ABSTRACT Every Natural gas well ceases producing as reservoir pressure depletes. The usual liquid presence in the reservoir can cause further problems by accumulating in the wellbore and reducing production even more. There are a number of options in well completion to prevent liquid loading even before it becomes a problem. Tubing size and... Continue Reading
ABSTRACT Preparation of Local Soap involves the se of wood ash from the flowering plant of Daniello, Oliveri (Agba) Isoberllima doka (Achi), Parkia Clappertonwna (Ugba) and Eleasis guineensis (Nkwu) as the source for the caustic alkali were compared for performance.  The woody tissue of the local trees were burnt at the temperature of 250 \'... Continue Reading
ABSTRACT The objective of the work is the catalytic conversion of waste plastics into fuel oil and solid wax using Ca(OH)2 and the design of pyrolysis reactor. Plastic wastes such as, polypropylene, low density polyethylene, high density polyethylene, polystyrene are the most frequently used in everyday activities and disposed of to the... Continue Reading
ABSTRACT The objective of the work is the catalytic conversion of waste plastics into fuel oil and solid wax using Ca(OH)2 and the design of pyrolysis reactor. Plastic wastes such as, polypropylene, low density polyethylene, high density polyethylene, polystyrene are the most frequently used in everyday activities and disposed of to the... Continue Reading
TABLE OF CONTENTS TITLE PAGE TABLE OF CONTENTS LIST OF TABLES ABSTRACT CHAPTER ONE:  INTRODUCTION 1.1        BACKGROUND OF THE STUDY 1.2        STATEMENT OF PROBLEM 1.3        OBJECTIVES OF THE STUDY 1.4        THE SIGNIFICANCE OF THE STUDY... Continue Reading
FACTORS THAT INFLUENCE CONSUMERS PREFERENCE OF DETERGENT TABLE OF CONTENTS CHAPTER ONE: INTRODUCTION 1.1 BACKGROUND OF THE STUDY 1.2 STATEMENT OF PROBLEM 1.3 OBJECTIVES OF THE STUDY 1.4 THE SIGNIFICANCE OF THE STUDY 1.5 THE SCOPE OF THE STUDY 1.6 RESEARCH QUESTION 1.7 DEFINITION OF TERMS CHAPTER TWO 2.0 REVIEW OF RELATED LITERATURE 2.1 MEANING OF... Continue Reading
ABSTRACT The sole aim of this research work is comparison and formulation of industrial Bar Soap and detergent. The major expert of this project deals with quality control processes in the production of a high quality bar soap and detergent. In synthetic detergent which was developed... Continue Reading
ABSTRACT Stabilized adhesive was developed and produced. The development was made by the production of samples of the adhesive with varied quantities of the active ingredients and the additives. From the various formulations made, it was observed that formulations A is the best for... Continue Reading
ABSTRACT This work investigates and evaluates local liquid dielectric for insulation of power transformers. Considering the importance of transformer insulation the investigation is borne out of the need to develop the capacity for local production of transformer dielectric. Natural esters of vegetables origin have been found to have the suitable... Continue Reading
AbSTRACT This research work is based on the construction of control chart for quality characteristics of Coke liquid (Sodium content, Sugar content and Volume) which may be used for control of future products of the Coca-Cola Company. Secondary data collected from Coca- Cola Company, Idokpa, Benin City Plant was analysed using Control Chart for... Continue Reading
AbSTRACT This research work is based on the construction of control chart for quality characteristics of Coke liquid (Sodium content, Sugar content and Volume) which may be used for control of future products of the Coca-Cola Company. Secondary data collected from Coca- Cola Company, Idokpa, Benin City Plant was analysed using Control Chart for... Continue Reading
ABSTRACT The physical properties of CNSL extracted by pyrolysis was studied using standard procedures. The physical properties of the CNSL studied and results obtained compared with other extraction methods (hexane extracted and decarboxylated) from literature are moisture content 4.1%, (6.40%, 3.2%), specific gravity 0.943 (0.926, 0.926)... Continue Reading
whatsappWhatsApp Us