Project Request: Base oil production from recycling of used lubricating oil uusin

More Details
Department:
Level :
Status: APPROVED
Delivery :Soft Copy

Related Works

Engine oils are made from crude oil and its derivatives by mixing of certain other chemicals (additives) for improving their certain properties. Lubricating oil is used to lubricate moving parts of engine, reducing friction, protecting against wear, removing contaminants from the engine, act as a cleaning agent, and act as an anti corrosion and... Continue Reading
Engine oils are made from crude oil and its derivatives by mixing of certain other chemicals (additives) for improving their certain properties. Lubricating oil is used to lubricate moving parts of engine, reducing friction, protecting against wear, removing contaminants from the engine, act as a cleaning agent, and act as an anti corrosion and... Continue Reading
ABSTRACT The topic of this project is the “selection of lubricating oils for varied engines performance”. The aim is to specify the adequate lubricating oils for different engines. Using some equipment like hydrometer, flash point tester, and visometer, the proportion of lubricating... Continue Reading
Abstract This study produced bio-lubricant with palm kernel oil and compared its quality with Tonimas Oil ( A commercial lubricating oil in the market). Palm kernel oil based lubricant was produced by dissolving 12.5ml of Zinc Dialkyl Dithiophosphate and 47.5ml of Ethylene propylene into 400ml of PKO and stiring them together to achieve a... Continue Reading
CHAPTER ONE INTRODUCTION 1.1Background of the study The generation and disposal of waste is an intrinsic part of any developing or industrial society. Waste, both from domestic and commercial sources has grown significantly in Nigeria over the past decade. Every time a householder shops at the... Continue Reading
ABSTRACT This work is an attempt at recycling and re-use of waste paper within Mapoly Community. Since the day it is invented till today, paper is a part of human life in various ways and it is gaining even more popularity as years go by. As the consumption of paper has been exploited. Recycling of paper has become vital since the demand for paper... Continue Reading
Abstract The advent of free recycling is largely alien and unheard of in Ghana. This is the practice of giving out unwanted but reusable items to other people who may have need of it. Freecycling is a linguistic blend of the words free and recycling which connotes the practice of giving unwanted items for free rather than discarding them in... Continue Reading
INTRODUCTION Cities are at the nexus of a further threat to the environment, namely the production of an increasing quantity and complexity of wastes. The estimated quantity of Municipal Solid Waste (MSW) generated worldwide is 1.7 – 1.9 billion metric tons.2 In many cases,... Continue Reading
A b s t r a c t Recycling of polyethylene waste to useful product is a way to reduce environmental problems caused by polymeric waste accumulation generated from day-to-day applications of polymer materials such packaging and construction. The recycling of polymeric waste... Continue Reading
ABSTRACT This work is an attempt at recycling and re-use of waste paper within Mapoly Community. Since the day it is invented till today, paper is a part of human life in various ways and it is gaining even more popularity as years go by. As the consumption of paper has been exploited. Recycling of paper has become vital since the demand for paper... Continue Reading
Natural gas is one of the major sources of fuel and raw material to industries all over the world. However, it contains some acid gases such as C O2 and H2 S which are corrosive and harmful to the environment. These acid gases must be brought to permissible limits to promote safety in the operation and increase the heating value of the natural... Continue Reading
THE EFFECT OF REUSE, RECYCLING OF PLASTICS AND ESSENTIAL TO WASTE MANAGEMENT Abstract Be it food packets, toys, storage packing, furniture or electronic items, plastics are so widely used that imagining our lives without it is impossible. It is one of the best substitutes for wood, thus reducing the cutting of trees and helping the environment. On... Continue Reading
Natural gas is one of the major sources of fuel and raw material to industries all over the world. However, it contains some acid gases such as C O2 and H2 S which are corrosive and harmful to the environment. These acid gases must be brought to permissible limits to promote safety in the operation and increase the heating value of the natural... Continue Reading
This report is a product of an extensive research project seeking to recycle laundry wash water for Milliken Industrials Limited, Middleton, U.K. Data gathered from meter readings in Milliken Industrial Ltd, Middleton, has constantly indicated the laundry aspect of their manufacturing process as by far, the process that consumes the largest volume... Continue Reading
This report is a product of an extensive research project seeking to recycle laundry wash water for Milliken Industrials Limited, Middleton, U.K. Data gathered from meter readings in Milliken Industrial Ltd, Middleton, has constantly indicated the laundry aspect of their manufacturing process as by far, the process that consumes the largest volume... Continue Reading
This report is a product of an extensive research project seeking to recycle laundry wash water for Milliken Industrials Limited, Middleton, U.K. Data gathered from meter readings in Milliken Industrial Ltd, Middleton, has constantly indicated the laundry aspect of their manufacturing process as by far, the process that consumes the largest volume... Continue Reading
AbstractThe main purpose of the project is to convert polyethylenetetraphylate (PET), a known plastic waste material in Ghana, to wealth. Composite samples were produced by heating aggregates together with shredded PET plastic waste material, while bitumen was added to the plasticcoated aggregates. The composites produced were of 4.5 wt%, 9.0 wt%,... Continue Reading
CHAPTER ONE INTRODUCTION 1.0 Introduction An Advance intelligence base system for job applicants assessment is an artificial intelligence system (expert system) that processes the application of applicants so as to determine eligible candidates for employment. Recruitment of employees also known as forms a core part of the central activities... Continue Reading
(A CASE STUDY OF KOGI STATE POLYTECHNIC LOKOJA) Abstract This project titled “” is so design to help security information system especially for the management of the present porous security system in the campuses. Presently the polytechnic is not armed with... Continue Reading
Abstract This project titled “” is so design to help security information system especially for the management of the present porous security system in the campuses. Presently the polytechnic is not armed with modern data processing and security information system. To help wake it up from its... Continue Reading
whatsappWhatsApp Us