THE IMPACT OF THE MANAGEMENT ACCOUNTANT TOWARDS THE PROFIT MAXIMIZATION OF AN ORGANIZATION - Project Topics & Materials - Gross Archive

Click To download full Project Materials

THE IMPACT OF THE MANAGEMENT ACCOUNTANT TOWARDS THE PROFIT MAXIMIZATION OF AN ORGANIZATION
(A CASE STUDY OF EMENITE PLC)
ABSTRACT

The topic “the management accountant is identified as one of the key officers in the accounting department of any manufacturing company.  He has the duty of providing the required professional information reroute to achieving the organization goal.  Some of his functions include planning and controlling activities formulation of strategy decision taking optimizing the use of resources etc. In his planning function he quantifies and interpreters the effect of planned transaction and other economic event of the organization. The management accountant by virtue of his duties participants indirectly in the management process. This research work aims to bring to the knowledge of its user the role the management accountant plays in the achievement of the goal of every manufacturing outfit which is profit maximization. The work is organized in five chapters, chapter one is the introductory. Part which include the background of the study statement of problems significance scope and limitation of the study. Chapter two is the literature review this is where the pinions of various authors in related subjects are reviewed. Chapter three deal with the research design and methodology. This could be seem as a framework or a plan that is used in collecting analyzing the data for the study. It reveals the sources of the data the sample used and the method of investigation. In chapter four the data are being presented and analyzed the hypotheses stated were adequately tested and decision taken.  Finally in the fifth chapter the finding of the research work is disclosed and recommendations and suggestions are given for the benefit of the user.
 TABLE OF CONTENTS
CHAPTER ONE
Introduction
1.1      Background of the Study      
1.2      Statement of Problems  
1.3      Research Hypothesis     
1.4      Research Questions      
1.5      Significance of the study      
1.6      Scope of the Study              
1.7      Limitation of the study  
1.8      Definition of Terms       
CHAPTER TWO
2.0  Review of Related Literature
2.1      Definition of Profit Maximization   
2.2      Functions of Management Accountant in relation to Profit Maximization                           
2.3      Ways of Regulating cost in a Manufacturing
Company                                         
CHAPTER THREE
3.0  Research design and methodology
3.1      Research  of Design                           
3.2      Area of the Study                       
3.3      Population of the study               
3.4      Sample Method                          
3.5      Research Instrument                  
3.6      Validity and Reliability of the Research Instrument      
3.7      Sources of Data                         
3.8      Analytical Technique                   
 CHAPTER FOUR
4.0  Data Presentation and Analysis     
4.1      Presentation and Analysis of Data
4.2      Test of Hypothesis                     
CHAPTER FIVE
5.0  Summary of findings conclusion and recommendation
5.2      Summary of Findings                  
5.3      Conclusions                               
5.4      Recommendations                             
Bibliography
Appendix
 CHAPTER ONE
INTRODUCTION
1.1  Background of the Study
Modern business organization operates in an environment that is considerably complex. Since the 1970’s managers have had to cope with rising interest rates materials shortage crises inflation and environment regulations to mention a few. And the traditional method of analyzing problems and making decision have been found in capable of effectively handling this increasing complexities due to the  change that exist within the environment it becomes an important characteristics of a good management to be able to evaluate the past changes to react to current changes and to be able to predict the future changes. In this direction management needs information continually which will help in the planning and controlling of the operation of the organization.          
The need for accountability has given rise to cost accounting system, which provides information that is useful to management for internal reporting objectives.  Due to the complexities in the system of most organization the system of cost accounting is equally becoming complex and resultantly a body of professional with special expertise in this is created. This body of professional is called the management accountants and the area of study is know as management accounting.
 Woody et al (1985) define management accounting as the process of identification measuring accumulating analyzing preparation interpretation and communication of financial information used by management to plan events and control within an organization and to ensure proper use and accountability of its resources form the above definition it means that the management accountant has a range of function to carry out in n organization.
According ICMA “management accounting is the presentation of accounting information in such a way as to assist management in the creation of policies and in the day-to- day operation of an undertaking”.
To achieve this aim he management accountant is interested in the past the present and the future. Useful information can be extracted form past result which together with report of current performance can point the way to immediate management action.  In the same vein forecasting the future enable the management to evaluate current result more readily and may also reveal areas of business which requires corrective actions.
       ACCA defined management accounting as the application of accounting and statistical techniques to the specified purpose of producing and interpreting information designed to assist management in the function to promoting maximum efficiency and in envisaging, formulating and co-ordinating their executions.
David fanning (1983) defined management accounting as “The application of professional knowledge and skill in the preparation and presentation of accounting information in a way to assist the management in the formulation of polices and in the planning and control of operating of the undertaking it is designed to provide in formation for internal problem solving. The management accounting system of planning and control is designed to spur up and help chief executive search for and selecting shorting run and long run goals and implementing plans apprising performance and pin- pointing deviations from plan.
To be able to do all these the management accountant must posses some knowledge of account. He must have a thorough understanding of the operations of the organization in which these system are implemented and the appropriate technology to apply in each case for the provision of management information. Information provision depends solely on the type of business.  It is obvious that the management of a manufacturing company will need information that will enable them consider the factor affecting cost of production cost of classification cost reduction product pricing market shares of the products choice of the product lines diversification and investment.  However a trading company needs information that will concentrate decision on customers demands advertisement and product branding.
The management accountant uses data  from the financial and cost accounting system to perform his ask he conducts special investigations and uses accounting and other appropriate techniques from statistic and operation research. He considers the human element in all activities so that at all times he will be provided with information which is relevant for carrying out his work effectively so as to maintain his value or even enhance it.  In addition he interprets data and communicate same to the management.
The  inability of the management accountant to perform his duties would result in shortage of in information for long and short run planning system and he necessary control to be made  the basic objective behind the continuous existence of business organization is the need to increase its wealth through profit making. It actually ranks lightest among the objectives of business organizations and the management needs accurate and timely information for decision making in order to achieve this noble objective.
Weldi (1976) opines that profit maximization can only come about through an efficient and effective management process  and Nigeria being a developing country it is clear that the cost of running a business is increasing at a very high rate.  Many manufacturing companies in Nigeria has this as a problem them struggle to maintain reasonable amount of earning in a situation where costs are rising there by making profit margin more and more difficult to sustain  mean while the Nigeria manufacturing companies as reported  by he manufacturing association of Nigeria (MAN) in its 1997 economic review are faced with escalating costs of production arising from the adoption of macro-economic policies which are inflationary in nature. This trend reinforces the imperativeness of the application of sound management accounting technique in the manufacturing companies.
Interestingly Adewumi (1989) posits that management practice is yet to have its rightful place in Nigerian manufacturing companies.  The implication is that the principle of management is rarely applied in most manufacturing firms in Nigeria.
A careful study of Nigeria manufacturing companies shows as decrease in productivity this is as a result of gross incompetence and lack of motivation on the part of the top management and their subordinates consequently there has with the general planning and control of the firms resources thus profit maximization is firmly rooted in the effectiveness of the planning and control of the firms resources.  Generally speaking the role of a management accountant is based on his technical knowledge experience and judgment in contributing to the success of the manufacturing industry.
1.2 STATEMENT OF PROBLEM  
There has been a considerable lack of appreciation by many as to the intrinsic value of management accountants.  Manufactures like other business executions have had to appreciate where such value have stimulated the development of management accounting as an information tolls in business organization.  Such events includes the increased competition in business and rapidly developing technology. The resultant changes that have emerged have intensified mangers need for information  that is continually for financial information beyond that contained in the traditional income statement and balance sheet.
Over the last three decades product have become obsolete as an alarming rate. The advent of scientific breakthrough have resulted in the development of many new basic components such as the transistor and electronic “chip” which have literally revolutionalized many industries and their products. Scientific researcher reports that this revolution is only he beginning. Drastic changes have taken place in production method over the last three decades the term ‘Automation’ has crept in and today many product are produced ritually untouched by human hands. For example oil refinery operations are controlled by massive computer networks machine tools are electronically controlled and there are even some entire manufacturing plan where workmen do little more than monitoring instrument panel modes of management and method of decision making have been affected by the development of new and powerful quantitative tolls such as linear programming probability analysis and decision theory. These new tolls which have come to be from the mathematical and statistical sciences are becoming indispensable in day- to day- decision making.
The problem of increase cost of production have forced   the companies involved to make many adjustment which include modification of product changes in the methods of production and even marketing and the discovering of new sources of financing production some company go as far as reducing the quality of raw material and end up producing less quality producing which cannot help matters in  the long run.
The economic impact of these and other factors have been far reacting as manger of companies are now competing and cost of production escalating these has in effect expanded the role of management accountant as an information tools over the years.  There is also the problem of poor inventory management which leads to overstocking there by tying down the company’s working capital. Another kind problem that is facing some companies is the installation of improper plans to reduce cost of production so as to maximize profit e.g. making use of low quality raw material.            
     RESEARCH HYPOTHESIS
H0:     Profit maximization is very essential to management accounting.
Hi:       Profit maximization is not very essential to management accounting.
H0:  Pricing leads to appropriate determinant of profit
H2:  Pricing do not leads to appropriate determinant of profit
1.4 RESEARCH QUESTION
i.     What cost reduction techniques is place in your company?
ii.    Does the system of management accounting given general information supporting the significance of profit maximization.
iii.    The company’s fixed cost are not always constant over the relevant range of output.      
1.5   SIGNIFICANCE OF THE STUDY        
The management accountant makes the necessary information available to the management by he application of his skill and knowledge.
The significance of this study is to bring to the notice of the management the exemplary role of the management accountant and the techniques he use to provide information and also how these would affect the operations and the attainment of the organizational goal if these information provided are not recommended  for use by the management.  With such knowledge and information put to use management would be able to plan control the organizaiton such that the cost of operating the business will be at a minimum while profit will be enjoyed at the end.
1.6    SCOPE OF THE STUDY
In a bid to keep the project within a manageable limit and in view of the limited time and resources available to the researcher he has localized and confined the study to the manufacturing companies in Enugu.
1.8   DEFINITION OF TERMS
a. Profit maximization:   Making great profit  out of the little resources available
b.    Impact:   A part / effect a person play in real lipe.
c.    Firm:      A business concern or a company.
d.    Management accountant:      This is a person who is responsible for keeping account i.e. keeping records of amount spent and that received and also providing management information.
e.    Journal:   A newspaper or magazine that deals with a particular subject or profession
f.     Linear programming:     This is a mathematical technique concerned with the allocation of scarce resources. It optimize the value of some objectives.
             

TERMS AND CONDITIONS

Using our service is LEGAL and IS NOT prohibited by any university/college policies

You are allowed to use the original model papers you will receive in the following ways:

1. As a source for additional understanding of the subject

2. As a source for ideas for your own research (if properly referenced)

3. For PROPER paraphrasing ( see your university definition of plagiarism and acceptable paraphrase)

4. Direct citing ( if referenced properly)

Thank you so much for your respect to the authors copyright.


For complete Project

Visit www.grossarchive.com

Or call

+2348130686500

+2348093423853