Chemical Engineering Project Topics and Materials (Page 7)

Showing 151 - 175 of 503

151) KINETIC STUDY AND OPTIMIZATION OF SELECTED FACTORS AFFECTING CORROSION USING RSM

ABSTRACT   The kinetics and optimization of inhibitive action of leaves extract of pawpaw, Azadirachta indica (neem tree) and bitter leaf on corrosion of mild steel in acidic medium was studied by weight loss technique using central composite design of response surface methodology for optimization. The metal was analyzed using Atomic Absorption... Continue Reading
  • Type:Project
  • ID:CNG0371
  • Pages:167

152) SYNERGISTIC EFFECT OF DATURA STRAMONIUM LEAVES EXTRACT - ZN2+ ON THE CORROSION INHIBITION OF MILD STEEL IN WELL WATER

This study covers the evaluation of the synergistic effect of Datura stramonium leaves extract-Zn2+ in the corrosion inhibition of mild steel in well water. Varying effects of different concentrations of the extract and 5ppm of Zn2+ on the corrosion inhibition of the mild steel specimen will be determined in order to ascertain the synergistic... Continue Reading

153) PRODUCTION OF BIOETHANOL FROM CASSAVA USING A HYBRID OF SACCHAROMYCES CEREVISIAE AND SACCHAROMYCES PARADOXUS

ABSTRACT  Cassava  is  considered  as  a  potential  source  for  the  commercial  production  of  bioethanol because of its availability and low market price. It can be used as a basic source to support large-scale biological  production of  bioethanol using  microbial amylases. With  the progression  and advancement in... Continue Reading

154) STUDIES ON MICROWAVE-ASSISTED EXTRACTION OF DRUMSTICK TREE (MORINGA OLEIFERA) SEED OIL

ABSTRACT The need for effective and efficient means of oil extraction has been a concern in recent time. Hence, this study aimed at the oil extraction from Moringa oleifera seeds using the Microwave-Assisted extraction method. The extraction process was modeled using Response Surface Methodology (RSM). Also, the evaluation of Moringa oleifera oil... Continue Reading

155) PLANT DESIGN OF 250,000KG/YR OF LINDANE

                                                                      EXECUTIVE SUMMARY       This work presents the design of a plant that will produce 250000kg/yr of lindane from benzene, chlorine and water at high temperature and pressure using direct chlorination method.... Continue Reading
  • Type:Project
  • ID:CNG0367
  • Pages:164

156) CHARACTERIZATION OF NON-EDIBLE OIL FROM WASTE PLANT MATERIALS FOR PRODUCING BIODIESEL

ABSTRACT Oil obtained from orange peels and velvet tamarind nut by solvent extraction (n-hexane and acetone) using the soxhlet extractor were investigated as feedstock’s to determine some of the suitable parameters such as iodine value, saponification value, specific gravity, density, acid value and free fatty acid value, and their percentage... Continue Reading

157) DESIGN, FABRICATION, AND PERFORMANCE EVALUATION OF A DOUBLE EFFECT EVAPORATOR

This project study was aimed at designing, fabricating, and evaluating the performance of a double effect evaporator, which was used to evaporate sugar syrup to be used for students’ demonstration. During the course of the study, the methods that were used comprised of the material balances, energy balances, and determination of the component... Continue Reading

158) DESIGN OF DISTILLATION COLUMN

Azeotropic distillation of ethanol-water mixture is accomplished by adding a volatile third component to the liquid which changes the volatility of one of the two components more than the other so the components are separated by distillation. The two components to be separated often have similar boiling point components which do or do not... Continue Reading

159) PRODUCTION AND CHARACTERIZATION OF ACTIVATED CARBON PRODUCED FROM A SUITABLE INDUSTRIAL SLUDGE

Abstract: The purpose of this study is the preparation of activated carbon using a suitable industrial sludge. The characterization of two types of industrial sludges showed that paper sludge was a better option over rice husk. The activated carbon produced from pyrolysis of paper mill sludge was chemically activated with various activating... Continue Reading

160) PRODUCTION AND ANALYSIS OF METALLIC AND PLASTIC SEALANT

The project research entailed the production of high quality sealant  incorporating a local raw material for sealing holes and gaps in various materials  like metal and plastic. Two samples of acrylic sealants were produced, the first  samples which is the standard formulations involved the use of silica gel as a  major adhesion promoter and... Continue Reading
  • Type:Project
  • ID:CNG0362
  • Pages:136

161) THE EFFECT OF TEMPERATURE, CATALYSIS, AND DIELECTRIC CONSTANT IN THE KINETICS OF THE OXIDATION-REDUCTION REACTIONS OF [N-(2-HYDROXY-ETHYL)ETHYLENEDIAMINE-N’,N’,N’,-TRIACETATO COBALT (11)] B

The effects of temperature, dielectric constant and catalysis in the kinetics of the oxidation –reduction reactions (involving electron transfer) of N-(2-hydroxy-ethyl) ethylenediammine- N’,N’,N’-Triacetatocobalt (II) by Cu 2+  cation were determined.  The dielectric constant was decreased from 63.05 to 43.18 and it was found that the... Continue Reading

162) EVALUATION OF IMMUNOMODULATORY EFFECT OF PAUSINSYTALIA YOHIMBE METHANOL EXTRACT ON MICE

ABSTRACT Pausinystalia yohmibe is a member of thefamilyRubiaceae. It is a valuable medicinal tree, distributed in evergreen closed canopy forests in West Africa.  It is traditionally used for treatment mostly on erectile dysfunction. This research was carried out to evaluate the immunomodulatory effect of ( Pausinystalia yohmibe) stem bark... Continue Reading

163) PRODUCTION AND ANALYSIS OF METALLIC AND PLASTIC SEALANT

ABSTRACT The project research entailed the production of high quality sealant incorporating a local raw material for sealing holes and gaps in various materials like metal and plastic. Two samples of acrylic sealants were produced, the first samples which is the standard formulations involved the use of silica gel as a major adhesion promoter and... Continue Reading
  • Type:Project
  • ID:CNG0359
  • Pages:136

164) UTILIZATION OF BRACHYSTEGIA SPICIFORMIS (MSASA) LEAF POWDER IN THE REMOVAL OF NITRATES FROM WASTEWATERS: AN EQUILIBRIUM STUDY

ABSTRACT The investigation of nitrate adsorption onto Brachystegia spiciformis leaf powder from waste waters was performed. Characterization for the functional groups of the biomass before and after nitrate sorption as well as after desorption was done using an FTIR spectrophotometer. The effect of pH, contact time, dosage and initial nitrate... Continue Reading

165) CASHEW NUT SHELL LIQUID, A RENEWABLE AND RELIABLE PETRO-CHEMICAL FEEDSTOCK

ABSTRACT The physical properties of CNSL extracted by pyrolysis was studied using standard procedures. The physical properties of the CNSL studied and results obtained compared with other extraction methods (hexane extracted and decarboxylated) from literature are moisture content 4.1%, (6.40%, 3.2%), specific gravity 0.943 (0.926, 0.926)... Continue Reading

166) HYDRO GEOCHEMISTRY AND ENGINEERING GEOLOGY OF ADETA AREA, ILORIN, NORTH-CENTRAL NIGERIA.

ABSTRACT A study on hydrogeochemistry and quality of shallow water and engineering properties of soil around the Adeta area in Ilorin was carried out based on data obtained from the field and laboratory. Groundwater flow, descriptive, and multivariant statistical analyses, piper, stiff and durov diagrams, as well water quality indices were used to... Continue Reading

167) NATURAL GAS DEHYDRATION WITH ASPEN HYSYS VALIDATION OF THE CPA PROPERTY PACKAGE

ACKNOWLEDGEMENT     ABSTRACT   INTRODUCTION   OBJECTIVE     Natural Gas Dehydration   TEG   PROCESS DESCRIPTION     Modeling the Dehydration Process in Aspen HYSYS   Aspen Report of Absorber and Regenerator   Model Configuration   Run a Case Study to Identify   Possible Process Improvements   Graph and Results   Conclusion  ... Continue Reading

168) ANALYSIS OF SOME HEAVY METALS IN SELECTED SNACKS AVAILABLE IN THE FEDERAL CAPITAL TERRITORY (FCT) - ABUJA, NIGERIA

ABSTRACT  The analysis of macro and trace elements in selected snacks available in the Federal Capital Territory (FCT), Nigeria showed varied concentrations of the essential elements (Fe, Cu, Ni, Zn, Mg, Ca, K, Na, Mn, Cr) and non-essential elements (Pb, Cd, Hg, Co) in the fifteen different samples (Meat-pie, Bread, Cake, Doughnut, Scotched egg,... Continue Reading
  • Type:Project
  • ID:CNG0354
  • Pages:120

169) WEB BASED LEGAL PRACTITIONER APPLICATION SYSTEM

CHAPTER ONE INTRODUCTION 1.1 BACKGROUND OF THE STUDY To understand the web-based legal practitioner application system, it includes not merely the profession, which is practiced in courts but also covers law teaching, law research, administration in different branches where law plays a role and in... Continue Reading

170) WEB BASED LEGAL PRACTITIONER APPLICATION SYSTEMS

WEB BASED LEGAL PRACTITIONER APPLICATION SYSTEM CHAPTER ONE INTRODUCTION 1.1 BACKGROUND OF THE STUDY To understand the web-based legal practitioner application system, it includes not merely the profession, which is practiced in courts but also covers law teaching, law research, administration in different branches where law plays a role and in... Continue Reading

171) ANALYSIS OF BUSH PEAR AND IT'S OIL

ABSTRACT The research project studies the analysis of pear and its oil. The mesocarp from edible African pear “DacryodesEdulis” were evaluated for their oil yield. The pulp from this pear were oven dried at 100oC-105oC to a moisture content level of 29%.The mesocarp was subjected to proximate analysis to determine the percentage of the... Continue Reading

172) EXTRACTION AND FORMULATION OF PERFUME FROM PLANT

CHAPTER ONE 1. 1 INTRODUCTION The word perfume derives from the latin ―per fumum‖ meaning through smoke, is fragrant liquid that is sprayed or rubbed on the skin or clothes to give a pleasant smell. Extraction of perfume from various plants resources is of ancient origin. Infact the natives from different tropical regions of the globe have... Continue Reading

173) EXTRACTION AND FORMULATION OF PERFUME FROM LEMONGRASS LEAVES

CHAPTER ONE INTRODUCTION 1.1 Background Perfume is a fragrant liquid made from an extract that has been distilled in alcohol and water. Since the beginning of recorded history, humans have attempted to mask or enhance their own odor by using perfume, which emulates nature’s pleasant smells. Many natural and man-made materials have been used to... Continue Reading

174) PHYTOCHEMICAL ANALYSIS ON MORINGA OLEIFERA AND AZADRICHTA INDICA LEAVES

ABSTRACT Studies were conducted to determine the phytochemicasl present in moringa olrifera and Azadrichta indica leaves. Leaves for this work were washed, room dried ground to powder. The ground leave for both sample were soaked in four different solvent; Ethanol, n-Hexane,... Continue Reading

175) THE KINETIC STUDY ON HYDROLYSIS OF CELLULOSE (SAW-DUST)

ABSTRACT This research project studied on the kinetics of hydrolysis of cellulose to glucose. The steps employed to achieve this project involved extraction of cellulose from sawdust and subsequently, hydrolysis of starch to simple sugar. This was followed by glucose analysis. Different experiments were conducted during acid hydrolysis to study... Continue Reading
Need help with your Chemical Engineering Project Topic? Click here to request assistnce or reach us on + 234 813 0686 6500
whatsappWhatsApp Us