THE DESIGN AND CONSTRUCTION OF A HOT PRINTING MACHINE

  • Type: Project
  • Department: Mechanical Engineering
  • Project ID: MCE0101
  • Access Fee: ₦5,000 ($14)
  • Chapters: 5 Chapters
  • Pages: 65 Pages
  • Format: Microsoft Word
  • Views: 987
  • Report This work

For more Info, call us on
+234 8130 686 500
or
+234 8093 423 853

ABSTRACT

            Parameters on which clear prints depends were comprehensively investigated.  The study revealed that clear print depends on the impressed pressure, the working temperature and the silver print paper.   Also studied were the manners of dependence of these parameters on prints impressed on sheets of varied thickness.  The result of this investigations were utilized in the design and construction of a operational hot (manual) printing machine.

TABLE OF CONTENT CHAPTER ONE

1.0       introduction

1.1              Identification of need

1.2              Purpose of the project

1.3              Definition

CHAPTER TWO

2.1              Literature review

CHAPTER THREE

3.0              Specification of components

3.1       expectancy

3.2              Choice of material and methods

3.3              Component parts

CHAPTER FOUR

4.0       theory of design/design calculations

4.1              Heating system

4.2              Mechanical system

CHAPTER FIVE

5.0       sequence of operation

CHAPTER SIX

6.0       machine handling

6.1              Assembly

6.2              Operation procedure

6.3              Maintenance

6.4              Repair

CHAPTER SEVEN

7.0       testing

7.1              Experimental determination of temperature time relationship

7.2              Discussion/recommendation

7.3              Mechanical efficiency

7.4              Conclusion

CHAPTER EIGHT

8.0              Cost estimate

8.1       material cost analysis

8.2              Machine/labour cost analysis

8.2              Summary of analysis

References CHAPTER ONE

INTRODUCTION

1.1              IDENTIFICATION OF NEED

In recent years Nigeria lays strong emphasis on mass literacy and indigenous technology.  Printed matters are indispensable material in mass literacy campaign. The trend towards indigenous technology imposes a severe clamp down on imported engineering including printing machinery.  Thus, the situation is such that makes the acquisition of printing machinery from outside our own borders extremely difficult.

To lessen the economic strain on the mass literacy campaign, the production of local printing machinery I s apparently imperative.  It is this fact that rendered initiative to the conception and realization of this low cost but efficient printing machine based entirely on local technology and resources.

This machine is very useful in the printing of many items like paperbacks, cards, leatherbacks etc.  Its design is expected to motivate and advance the design and construction of other machines destined for similar purposes and based on indigenous technology and resources.

1.2       PURPOSE OF THE PROJECT

            Civilization and complexity of modern society has brought a number of social problems to be traced.

            The use of textbooks, printed materials such as success cards and posters has now become imperative for the overall dissemination of heart felt  feelings and messages to friends both near and far.

            Unfortunately, the prevailing economic pr oblem in the country (Nigeria) have sky rocketed the prices of these items.  Renders for example now rely solely on the libraries for up dating their knowledge.

            It becomes clear then, the need to equip the libraries to met up with the challenges of their services.

            Apart from refurbishing damaged books libraries are expected to render services such as printing of cards, printing and binding of students write ups like thesis, project etc.

            All this needs formed the basis for the construction of this machine because these functions cannot be performed without a printing machine.

1.3       DEFINITIONS

TYPES            -           These are the characters or alphabets

that form the letters

PRINT            -           This is the mark or impression produced

on pa per due to the types

SILVER SHEET

DEPOSITS     -           This is a thin rectangular

cellophane sheet coated with silver compounds.

THE DESIGN AND CONSTRUCTION OF A HOT PRINTING MACHINE
For more Info, call us on
+234 8130 686 500
or
+234 8093 423 853

Share This
  • Type: Project
  • Department: Mechanical Engineering
  • Project ID: MCE0101
  • Access Fee: ₦5,000 ($14)
  • Chapters: 5 Chapters
  • Pages: 65 Pages
  • Format: Microsoft Word
  • Views: 987
Payment Instruction
Bank payment for Nigerians, Make a payment of ₦ 5,000 to

Bank GTBANK
gtbank
Account Name Obiaks Business Venture
Account Number 0211074565

Bitcoin: Make a payment of 0.0005 to

Bitcoin(Btc)

btc wallet
Copy to clipboard Copy text

500
Leave a comment...

    Details

    Type Project
    Department Mechanical Engineering
    Project ID MCE0101
    Fee ₦5,000 ($14)
    Chapters 5 Chapters
    No of Pages 65 Pages
    Format Microsoft Word

    Related Works

    ABSTRACT           Parameters on which clear prints depends were comprehensively investigated.  The study revealed that clear print depends on the impressed pressure, the working temperature and the silver print paper.   Also studied were the manners of dependence of these parameters on prints impressed on sheets of varied... Continue Reading
    ABSTRACT Parameters on which clear prints depends were comprehensively investigated. The study revealed that clear print depends on the impressed pressure the working temperature and the gold foil print paper life expectancy. Also studies were he manner of dependence of these parameters on prints impressed on sheets of varied thickness. The... Continue Reading
    ABSTRACT Parameters on which clear prints depends were comprehensively investigated. The study revealed that clear print depends on the impressed pressure the working temperature and the gold foil print paper life expectancy. Also studies were he manner of dependence of these parameters on prints... Continue Reading
    ABSTRACT Parameters on which clear prints depends were comprehensively investigated.  The study revealed that clear print depends on the impressed pressure the working temperature and the gold foil print paper life expectancy. Also studies were he manner of dependence of these parameters on prints impressed  on sheets of varied thickness.  The... Continue Reading
    ABSTRACT This work is an attempt to evolve a quicker and easier method of achieving cylindrical shape object from a work price. This will no double save considerable human labour and time wastage involved in traditional manual method of carving. To achieve this preliminary experiment was carried out... Continue Reading
    CHAPTER ONE 1.0 INTRODUCTION 1.1 BACKGROUND Cassava which is known biologically as “manihotesculentacrantz” is a crop which has many varieties. Cassava, is a perennial woody shrub in the Euphorbiaceous (Spurge family) native to South America, but now grown in tropical and sub-tropical areas... Continue Reading
    ABSTRACT There is need for the hygienic processing of cassava prevalent conditions in the commercial grating areas of this staple food show a susceptibility to food contamination.  A home scale cassava grater was improved on in a design and fabrication.  Machine efficiency, safety factors, and portability were considered in this research.  The... Continue Reading
    ABSTRACT Packaging of food which is viable means of business opportunity has been exploited by individuals and corporate bodies for a very long time because the importance of packaging food products are very enormous ranging from protection of the product to preventing the food from spoiling. There is no way one can successfully go into business... Continue Reading
    The main aim and objective of this project is to design and build and arc welding machine that operates on 36vdc at variable frequency which of benefit to urban area. This reduces the weight and size of the transformer use for welding. To have an arc welding machine that is more efficient which produce neat welding. INTRODUCTION Welding is a way... Continue Reading
    ABSTRACT The design and fabrication of a reciprocating nail gasket is a new innovation in technology. The one in existence is manually operated. In which a punch that is adjacent to a die is mounted to the handle which is attached to the shaft. A helical spring that is incorporated to the... Continue Reading
    Call Us
    Get this work
    whatsappWhatsApp Us