DESIGN AND FABRICATION OF WOOD LATHE MACHINE

  • Type: Project
  • Department: Mechanical Engineering
  • Project ID: MCE0095
  • Access Fee: ₦5,000 ($14)
  • Chapters: 5 Chapters
  • Pages: 65 Pages
  • Format: Microsoft Word
  • Views: 1.2K
  • Report This work

For more Info, call us on
+234 8130 686 500
or
+234 8093 423 853

ABSTRACT

            To achieve the aim of producing a functional and efficient wood lathe machine.  We analyzed and as well synthesized the different possible design solutions and concepts.  We carried out the analysis of different component part of the machine to determine their suitable dimensions based on loading and stresses due to them.  We used available local material and tool from a private workshop. We also made use of some machine tools in the school workshop.  Finally, the parts were assemble and the machine test – run.  To ensure the achievement of best performance, interactive procedures, were carried out.  The material, labour and overhead costs were determined to get the production cost of a prototype.

TABLE OF CONTENTS CHAPTER ONE

1.0       Introduction                                                               

1.1              Objectives                                                                  

1.2              Literature Review                                                      

1.3              Trend in Lathe Machine Fabrication              

1.4              Dimensions and Specification                       

1.5              Statement of Problem                        

1.6              Purpose of Study                               

CHAPTER TWO

2.0              Synthesis                                                        

2.1       Theory of Design                                                       

2.2              Materials Selection                             

2.3              Analysis                                                                     

2.4              Resolution of Forces                                                  

2.5              Reactions, Forces and Moment Diagrams                 

2.5.1    The Shear force and bending moment diagrams       

2.6              Maximum Shear and Bending Stresses                                 

CHAPTER THREE

3.0              Assembly Procedure                                                  

3.1       Testing and Evaluation                                                          

3.2              Operational/Safety Guide                                                                  

3.3              General Maintenance                                                 

CHAPTER FOUR

4.0              Cost Analysis                                                             

4.1       Material Cost                                                             

4.2              Labour Cost                                                                           

4.3              Overhead Cost                                                                       

4.4              Summary of Costs                                                                 

CHAPTER FIVE

5.0              Conclusion                                                                             

5.1       Recommendations                                         

            References                                         

CHAPTER ONE

1.0       INTRODUCTION

            In recent times, the demand for interior decorations and furniture has been on the increase.  With it comes the choice of various designs and models.  This has led to the design of a good number of machines that can be used by the craftsmen to create different wood designs amongst which is the wood lathe machine.

  1.1       OBJECTIVES

            The main objectives of this project are to:

(a)        Use available local materials in fabrication

(b)        Achieve a reduction in the cost of production of the machine

(c)        Reduce the labour cost and time spent on using hand tools for wood dressing

(d)       Create awareness for, and encouragement of indigenous technology

(e)        Increase Productivity and creativity

            The vital need for the fabrication of wood lathe is significant in the much delay and time as well as energy wasted in using simple hand tools to carry out jobs moreover, the cost of importation of a lathe machine is tool high for an average war.  Similar to the use of other machine tools, the wood lathe machine will help to reduce the cost and consequently increase the rate of production and craftsmen skill.  It is also important to explore the design of machines to improve on the ones already in existence.

1.2       LITERATURE REVIEW

            This covers a brief but concise history of the lathe machine, and other works relevant to this project, which had been done earlier.

1.3       TREAD IN LATHE MACHINE FABRICATION

            The emergence of the lathe machine date back to an unknown period, but it gained popularity between the sixteenth and seventeenth centuries.  Then opticians used it for cutting lenses used in the construction of astronomical telescope.  They modified the relatively rough technique for special purposes.  Artisans and furniture makers used the larger lathes in turning frame works though the frames were made of wood and had one or two headstocks depending on the work being done.  The wooden frame made it inaccurate.

Discussed below are some related lathe machines:

A.        CENTER LATHE MACHINE

            A center lathe is used to machine metals, by rotating the work fierce mounted between centers against a cutting tool.  The tool can be fed both transversely and longitudinally with respect to the turning axis of the job.  The tool can be operated manually or automatically and many shapes as well as different works can be done on the center lathe. Such work as cylindrically, eccentric or conical shape can be machined.  Also done on the center lathe are threading turning and boring operations.

B.        CERAMIC LATHE MACHINE

            The ceramic – lathe is used for ceramic machining along, though the operation is similar to that of the center lathe.

C.        WOOD LATHE

            The wood lather, just like other types of lather, it can be used to carry out a wide range of machining operations, it saves time and does not wed much ski //s as in the use of hand tools.

1.4              DIMENSIONS AND SPECIFICATIONS

Below are the dimensions and specifications as regards t the fabricated wood lathe.

1.                  Total length of the machine

2.                  Total height of the machine

3.                  Width of the machine bed

4.                  Angle of inclination of the tail stock

5.                  The electric motor RPM

Frequency

Power

Voltage

Current

Capacity

6.                  The space between the bed rails

7.                  Diameter of headstock pulley

8.                  Headstock shaft diameter

9.                  Diameter of motor fully

10.              Width of tailstock (H – channel)

11.              V – Belt

12.              Maximum length of work

13.              Minimum length of work

14.              Maximum diameter of work

1.5              STATEMENT OF PROBLEMS

The continuous quest to have the problems of man and his growing need solved has led to the establishment of factories and others industries, which necessities an intermediate technology.  However, simple hand tools that were in use before are no longer efficient for mass production.  In the same manner, the importation of wood lathe machine, as a substitute for these tools, likewise has failed to meet man’s insatiable needs because of our unstable economy.

Then, there comes the need for urgent attention to a better and locally made wood lathe machine.

1.6              PURPOSE OF STUDY

The design and fabrication of wood the lathe machine aims among others thing at justifying a simple way of scraping and cutting off wood at it’s hest quality at a minimum cost of labour, so that the financial burden if people can be reduced.

The simple design and fabrication of this machine, makes it viable, reliable and easy to carryout maintenance services at the minimized cost.

1.7       SCOPE OF WORK

            Essentially, the machine comprises the made of metal, with the headstock fixed in position, the tail stock moves along the bed of the machine, and the tool rest mounted on a cross slide which can be moved both longitudinally and transversely on the bed it is located between the headstock and the tail stock.

            In operations, the machine is limited to only scraping and cutting of any type of wood. Drilling operations cannot be performed on this machine.

            The calculation of the stress on the Headstock spindle

             The v belt attacked to the shaft gives a force.

       

Taking moments about c,

            For equilibrium condition åmc = 0

            294.3 x 200 – R1 x 100 = 0

            58860 = 100R,

            R1 = 588.6 and R2 = - 294.3N

            The maximum bending moment is found Jo be

            M = 294.3 x 100 = 294.30 Nmm

            The section modulus of the shaft 1/c

            =          pd3/32 where d = shaft diameter

            Þ        1/c         3.142 x 283/32 = 75 46 mm3

DESIGN AND FABRICATION OF WOOD LATHE MACHINE
For more Info, call us on
+234 8130 686 500
or
+234 8093 423 853

Share This
  • Type: Project
  • Department: Mechanical Engineering
  • Project ID: MCE0095
  • Access Fee: ₦5,000 ($14)
  • Chapters: 5 Chapters
  • Pages: 65 Pages
  • Format: Microsoft Word
  • Views: 1.2K
Payment Instruction
Bank payment for Nigerians, Make a payment of ₦ 5,000 to

Bank GTBANK
gtbank
Account Name Obiaks Business Venture
Account Number 0211074565

Bitcoin: Make a payment of 0.0005 to

Bitcoin(Btc)

btc wallet
Copy to clipboard Copy text

500
Leave a comment...

    Details

    Type Project
    Department Mechanical Engineering
    Project ID MCE0095
    Fee ₦5,000 ($14)
    Chapters 5 Chapters
    No of Pages 65 Pages
    Format Microsoft Word

    Related Works

    ABSTRACT Parameters on which clear prints depends were comprehensively investigated. The study revealed that clear print depends on the impressed pressure the working temperature and the gold foil print paper life expectancy. Also studies were he manner of dependence of these parameters on prints... Continue Reading
    ABSTRACT             A machine for corn shelling is highly and greatly needed to consistency of usage of corn in local and international levels.             With regards to this indispensable needs, a corn shelling machine is designed which operates to remove the corn grains and leaving the cobs intact.... Continue Reading
    DESIGN AND FABRICATION OF AN ICE-BLOCK MAKING MACHINE ABSTRACT This work is titled construction and fabrication of an ice block making machine. Ice block making machine revolves around the concept of refrigeration. The concept of refrigeration revolves around the reverse Carnot cycle. This is a cycle involving isentropic expansion (at the... Continue Reading
    ABSTRACT. A machine for corn Sheller is highly and greatly needed for consistence of usage of corn in local and international levels. With regards to this indispensable need, a corn-shelling machine is designed which operates to remove the corn grains and leaving the cobs intact. In attainment to this design objective and aims, a proper... Continue Reading
    ABSTRACT Parameters on which clear prints depends were comprehensively investigated.  The study revealed that clear print depends on the impressed pressure the working temperature and the gold foil print paper life expectancy. Also studies were he manner of dependence of these parameters on prints impressed  on sheets of varied thickness.  The... Continue Reading
    THE DESIGN AND FABRICATION OF A IRON SHELLING MACHINE ABSTRACT. A machine for corn Sheller is highly and greatly need for consistence of usage of corn in local and international levels. With regards to this indispensable need, a corn-shelling machine is designed which operates to remove the corn grains and leaving the cobs intact. In attainment to... Continue Reading
    ABSTRACT The aim of this paper is to get a best performance by an ice block/cube making machine of refrigeration with suitable time. In present day hotels, resort and bar require more ice in very less time. So, to solve this problem and control the required time to ice formation, we construct an ice cube making machine. In present days, in market... Continue Reading
    CHAPTER ONE INTRODUCTION The project is a pre-requisite for the award of Higher National Diploma (HND) in Mechanical Engineering. The project “Design and fabrication a corn shelling machine” is indeed an essential one in a time like this when almost al human endeavour is embracing technology for... Continue Reading
    ABSTRACT A machine for corn shelling is highly and greatly needed to consistency of usage of corn in local and international levels. With regards to this indispensable needs, a corn shelling machine is designed which operates to remove the corn grains and leaving the cobs intact. In attainment to... Continue Reading
    ABSTRACT This Machine is design and fabricate as a prerequisite for the award of a Higher National Diploma. We sketch different designs which after consideration of many factors like the machine efficiency, the cost of materials e.t.c before we finally embark on this machine. The machine major component are the shaft, the inner barrel, the outer... Continue Reading
    Call Us
    Get this work
    whatsappWhatsApp Us