+234 813 0686 500
+234 809 3423 853
info@grossarchive.com

ENVIRONMENTAL IMPACT ASSESSMENT OF A PROPOSED TANKFARM

  • Type:Project
  • Chapters:5
  • Pages:50
  • Format:Microsoft Word
(Environmental Science Project Topics & Materials)

For more Info, call us on
+234 8130 686 500
or
+234 8093 423 853

ABSTRACT

This study was carried out to assess environmental impacts of a proposed tankfarm which is to be situated at the Olokola Free Trade Zone in Ondo State (OKFTZ).

It encompasses various field sampling which includes soil, air and noise sampling taken from the proposed site. These samples were tested in the laboratory for parameters such as Total Hydro Carbon, pH values, Total Mean Percentage of Organic Matter, Heavy Metal Investigation, cation concentration. The Total Hydro Carbon which ranges from 4.8 to 33.0 milligram per kilogram

(mg/kg) in the wet season and 4.0 to 78.5 mg/kg for dry season. The THC is reflective of an unpolluted environment, and it is widely accepted that soils with a hydrocarbon level below 100 mg/kg are considered unpolluted. Heavy metals investigation showed that Iron had the highest mean concentration (2213mg/kg) followed by Zinc (4.82mg/kg) and Copper (3.78mg/kg) for dry season while for wet season, Iron had 2039mg/kg followed by Zinc (8.68mg/kg) and copper (3.0mg/kg). The concentration of the monovalent cation in the soils was generally high. Sodium (Na) concentrations ranged between 2,136 and 7,341mg/kg

in the wet season and 6,175 and 10,308 mg/kg in the dry season while potassium (K) ranged between 0.09 and 0.15 mg/kg in the wet season and 0.04 and 0.45mg/kg in the dry season. The high sodium content could be attributed to the proximity

of the study area to the ocean. 

Suspended Particulate Matter Levels for Wet and Dry Season on shows that there are more suspended particulate matter in the dry season as the result indicated a value of 196 µg/m3 against 64µg/m3 in the wet season. Comparing these findings with EGASPIN guidelines for national air quality standards, more air quality monitoring is needed during the dry season as it reaches a high of 196 though it is still within the EGASPIN (Environmental Guidelines and Standards for Petroleum Industries in Nigeria)  limits. Noise measurements showed that the measured levels varied significantly in the different locations

monitored and ranged from a low of 55.2dB to a high of 66.7dB, for the dry season and 52.7dB to a high of 67.9dB, for the wet season as compared to the World Bank standard of 45 dB(A) for residential areas during the daytime. It is recommended that environmental performance be monitored regularly to ensure compliance and those measures to be taken where necessary. The OKFTZ site is generally suitable for the proposed bulk fuel storage facility and all environmental risks can be minimized and managed through implementing preventative measures and sound environmental management systems.

TABLE OF CONTENTS

Title page

Certification     

Dedication       

Acknowledgement

Abstract       

Table of Content 

List of Tables

List of Figures 

CHAPTER ONE: INTRODUCTION

1.1 Introduction 

1.2 Objectives of the Project

1.3 Scope of the Project  

1.4 Justification of the Project 

1.5 Expected Contribution to Knowledge

1.6 About OKFTZ (Olokola Free Trade Zone) 

CHAPTER TWO:   LITERATURE REVIEW

2.1 Environmental Impact Assessment and the Environments

2.2 General Overview of the EIA Process 

2.3 Steps Involved in EIA 

2.3.1 Screening 

2.3.2 Scoping 

2.3.3 Impact Assessment 

2.3.4 Mitigation 

2.3.5 Reporting

2.3.6 Reviewing 

2.3.7 Decision Making

2.3.8 Implementation

2.4 Importance of Environmental Impact Assessment

2.5 General Benefits of EIA and flaws 

2.6 Environmental Policy 

2.7 Nigeria Guidelines and Standards 

2.8.1 National Effluent Limitation Regulation 

2.8.2 Department of Petroleum Resources 

2.8.3 Nigeria Petroleum Industry Guidelines

2.9 Effluent Standards 

2.10  Ambient Air Quality 

2.11  Noise Level   

2.12.1  Potential Environmental Impact Analysis

2.12.2  Impact Qualification 

2.12.3  Impact Rating

2.12.3.1 Legal/regulatory Requirement (L)

2.12.3.2  Risk (R) 

2.12.3.3  Frequency of Impact (F) 

2.12.3.4  Importance of Affected Environment Component and Impact (I)

2.12.3.5  Public Perception (P) 

CHAPTER THREE

Materials And Methods

3.1  Description Of The Study Area

3.1.1 Geology Of The Study Area

3.1.2  Local Climate And Meteorology 

3.2 Samples Collected

3.3 Equipments

3.4 Sample Preparation

3.4.1 Soil

3.5 Methods

3.5.1  Determination Of Ph

3.5.2  Determination Of Exchangeable Cations

3.5.3  Temperature

3.5.4  Determination Alkalinity

3.5.5  Chloride Determination

3.5.6  Determination Of Heavy Metals

3.5.7 Determination Of Air Quality And Noise

3.6 Assessment Methodology

3.6.1 Impact Quantification

3.6.2 Impact Rating

CHAPTER FOUR

Results And Discussions

4.1 Physiochemical Characteristics Of Soil

4.1.1 Analysis Of Selected Physiochemical Charateristics Of Soil

4.1.2 Analysis Of Selected Heavy Metal Observations

4.2 Soil Texture Data 

4.2.1  Analysis Of Soil Texture

4.3 Analysis Of Air Quality And Noise Data

4.3.1 Analysis On Air Quality

4.3.2 Analysis Of Noise Level

4.4 Potential Impacts For The Proposed Tankfarm Facility

4.4.1  Impacts On Air Quality 

4.4.2 Impacts On Noise Level

4.4.3 Impacts On Soil Quality 

4.5 Mitigation And Management Measures

4.5.1 Air Quality 

4.5.2 Noise

4.5.3 Soil Quality 

CHAPTER FIVE

Conclusions And Recommendations

5.1 Conclusions

5.2 Recommendations

References

INTRODUCTION

Environmental Impacts Assessment is an assessment or the analysis of the possible positive or negative impact that a proposed project may have on the environment together consisting of the environmental, social and economic aspects (International Association of Impact Assessment, 2002). Environment Impact Assessment or EIA can also be defined as the study of predicting the effect of a proposed activity/project on the environment. A decision making tool, EIA compares various alternatives for a project and seeks to identify the one which represents the best combination of economic and environmental costs and benefits. EIA systematically examines both beneficial and adverse consequences of the project and ensures that these effects are taken into account during project design. It helps to identify possible environmental effects of the proposed project, proposes measures to mitigate adverse effects and predicts whether there will be significant adverse environmental effects, even after the mitigation is implemented (IAIA , 2002). By considering the environmental effects of the project and their mitigation early in the project planning cycle, environmental assessment has many benefits, such as protection of environment, optimum utilization of resources and saving of time and cost of the project (Wikipedia, 2013).  

Environment refers to the totality of natural resources including the intricate interrelations among living and non living things which constitute the ecosystem and biomes (Randall et al; 1987). Webster’s new collegiate dictionary (2012) defined environment as the aggregate of all the external conditions and influences affecting life and development of organisms. Sada and Odemerho (2001) conceive environments as a system within which living organisms interact with the physical elements. Environment is a common property not only of existing stakeholders but also of the future generations (Okonkwo, 2004)

A Tankfarm is also known as an oil depot or oil terminal, a facility for storage of petroleum products or petrochemical products from which these products are usually transported to end users for further storage facilities. An oil tankfarm typically has tanks or either above or under the ground and gantries for the discharge of products into road tankers or other vehicles such as barges or pipelines. Tankfarms are usually situated close to oil refineries or locations where marine tankers or vessels containing products discharge their cargo.

A Tankfarm is a comparatively unsophisticated facility in that (in most cases) there is no processing or other transformation on site. The products which reach the depot from refinery are in their final form suitable for delivery to customers. Modern Tankfarms comprise the same types of tanks, pipelines and gantries as those in the past and although there is a greater degree of automation in site, there have been significant changes in depot operational activities over time (Wikipedia 2013).

One of the key imperatives of Health, Safety and Environment (HSE) is that the operators of a Tankfarm must ensure that products are safely stored and handled. There must be no leakages which could damage the soil or the table water and these forms of undesirable activities gives rise to the analysis of some predictable and unpredictable impacts of Tankfarm to the existing environments and thus brought about the delivery of this project.

ENVIRONMENTAL IMPACT ASSESSMENT OF A PROPOSED TANKFARM
For more Info, call us on
+234 8130 686 500
or
+234 8093 423 853

Share This

Details

Type Project
Department Environmental Science
Project ID EVS0010
Price ₦3,000 ($20)
Chapters 5 Chapters
No of Pages 50 Pages
Format Microsoft Word

500
Leave a comment...

    Details

    Type Project
    Department Environmental Science
    Project ID EVS0010
    Price ₦3,000 ($20)
    Chapters 5 Chapters
    No of Pages 50 Pages
    Format Microsoft Word

    Related Works

    ABSTRACT This study was carried out to assess environmental impacts of a proposed tankfarm which is to be situated at the Olokola Free Trade Zone in Ondo State (OKFTZ). It encompasses various field sampling which includes soil, air and noise sampling taken from the proposed site. These samples were tested in the laboratory for parameters such as... Continue Reading
    (A Case Study of MTN and Chevron Nigeria Plc). ABSTRACT This research was conducted after a thorough work at environmental accounting and its impact assessment on business organization. The shift in business economics towards environmental issues has led to the... Continue Reading
    ABSTRACT Environmental Impact Assessment (EIA) can broadly be defined as a study of the effects of a proposed project, plan or program on the environment. The legal, methodological and procedural foundations of EIA were established in 1970 by the enactment of the National Environmental Policy Act (NEPA) in the USA. At the international level,... Continue Reading
    ABSTRACT This study explored the impact of environmental factors on the effective teaching and learning of physical education and sports in Lagos state secondary schools. The study was guided by research objectives, questions and hypotheses that included the influence of school location, school facilities and modern supervision techniques on the... Continue Reading
    CHAPTER ONE INTRODUCTION 1.1 Background of the Study One of the major problems confronting the developing countries in the process of development is the management of rapid deterioration and change in the urban areas. These changes if not well managed will impact on visual... Continue Reading
    CHAPTER ONE INTRODUCTION 1.1    BACKGROUND  OF THE STUDY Malaria still remains a significant public health problem especially in low and middle income countries. According to the World Health Organisation (WHO), malaria transmission in Nigeria is abysmally high with over 76% of the population reporting more than 1 case per 1,000 populations... Continue Reading
    ABSTRACT This study examined the assessment of environmental and health risk of urban flooding. Nigeria is the most populous Black race country in Africa and in the world with a total land area of 983,213 km2 occupied by over 160 Million people: The interaction of these millions of people with their environment has left indelible mark on the... Continue Reading
    Abstract The research assessing the role of broadcast media in sensitizing people of Osogbo local government towards environmental sanitation. The physical environment is very important to the survival of the entire universe, and... Continue Reading
    ABSTRACT The two most common condenser tube problems faced by industrial users are internal tube fouling and tube failure. Fouling can have a major impact on the generating efficiency or the capacity of the condenser while the tube leaks or failure can seriously impact unit availability and reliability. Fundamental understanding of the root... Continue Reading
    AIM AND OBJECTIVES The aim of the study is to improve the visual aesthetics of the whole environment at large and make the faculty more convenient for man through the provision of different facilities lacking in the area. OBJECTIVES The objectives are those principled processes we intend to follow so as to actualize our goal. (a) carrying out an... Continue Reading
    Call Us
    Get this work
    whatsappWhatsApp Us