ACCOUNTING FOR STOCK AND WORK-IN-PROGRESS IN MANUFACTURING FIRMS. A CASE STUDY OF EMENITE LIMITED, ENUGU,

  • Type: Project
  • Department: Accounting
  • Project ID: ACC0489
  • Access Fee: ₦5,000 ($14)
  • Chapters: 5 Chapters
  • Pages: 133 Pages
  • Methodology: Simple Percentage
  • Reference: YES
  • Format: Microsoft Word
  • Views: 2.2K
  • Report This work

For more Info, call us on
+234 8130 686 500
or
+234 8093 423 853
ACCOUNTING FOR STOCK AND WORK-IN-PROGRESS IN MANUFACTURING FIRMS.
A CASE STUDY OF EMENITE LIMITED, ENUGU,
ABSTRACT

        This study is designed to portray the theory and practice in respect of the accounting for stock and work-in-progress is in manufacturing firms. It is helped that the knowledge presented by this study will tremendously be useful to manufacturing firms in particular and the general public.
        In my attempt to achieve the  aforesaid objective, the study was divided into five chapters. However, each chapter is further split into various subheadings for better presentation and clearer understanding.
        There was much concentration on the evaluation of the internal control procedure for requisition, purchase, reception, storage and issue of materials, inventory control, management and valuation. The hypothesis was accepted based on the analysis of the data collected  and test therein.
TABLE OF CONTENTS
CHAPTER ONE                      
1.1        Introduction                        
1.2        Statement of problem
1.3        Objectives of the study        
1.4        Significance of study                    
1.5        Scope and limitation
1.6        Hypothesis                                 
1.7        Brief history of Emenite limited Enugu             
1.8        Definition of terms                               
References                                 
CHAPTER TWO                                        
2.1.0 Control and revision of stock budget       
2.1.1 Investigation of variances     
2.2            stores Control                                     
2.2.1 Purchasing                         
2.2.2 Reception and inspection      
2.2.3 Storage                                                     
2.3            Valuing material issues and stock           
2.3.1 First in first out (4 Ifo)          
2.3.2 Last in fits out (Lifo)                             
2.3.3 Average Price Method                  
2.3.4 Standard price                    
2.3.5 Replacement price                               
2.3.6 Specific or unit price            
2.3.7 Highest in first out and next in first out   
2.3.8 Inflation price                                             
2.3.9 Stock evaluation                         
2.4            Inventory Control                        
2.4.1 The relevant cost in inventory control     
2.4.2 The economic order quantity
2.4.3 Safety stock: minimum or buffer stock
2.4.4 The maximum stock                            
2.4.5 Computation of safety stock and maximum stock                                                     
2.4.6 Re order level                     
                References                                         
CHAPTER THREE                                               
3.1            Methodology                               
3.1.1 Sources of data           
3.1.2 Primary data                      
3.1.3 Secondary data           
3.1.4 Oral Interview                             
3.1.5 Methods used in designing the questionnaire
3.1.6 Research Instrument
3.1.7 Questionnaire validity                   
3.1.8 The population                    
3.1.9 Sample size                                
3.1.10       Methods of analysis                     
References                                 
CHAPTER FOUR                                                          
4.1            Presentation of data and analysis   
4.1.1 Question                                            
4.2            Hypothesis testing                               
4.2.1 Calculation of Chi-Squared            
4.2.2 Interpretation of data                   
                References                                 
Chapter Five                                                               
5.0            Summary                                   
5.1            Conclusion                          
5.2            Situation Report (Finding)                     
5.3            Recommendation                                
                Bibliography                               
                Questionnaire                             
                Interview question                                       
CHAPTER ONE
1.1    INTRODUCTION
        Stock work-in- progress otherwise known as inventories are  defined by the international accounting standards (IAS)
No2 as tangible property.
(a)        Held for resale in the ordinary cause of business
(b)        In the process of production for such sale or
(c)         To be consumed in the production of goods or services for such sale.
This stock and work-in-progress cannot be the stock of raw materials, finished goods, component parts utilized in the production process and the items that have begun the production cycle are yet to complete the production process.
Survey carried out by the accountants of international study groups in 1968 showed that stock and work-in-progress broadly called inventories, generally constitute after fixed assets, the largest balance sheet in the financial report of manufacturing firms. Expressed as percentage of net assets after  depreciation, the size of such inventories is assessed at  twenty six percent (26%). According to J.Fred Welton and Eugene F. Brigham,, although various occur, inventories to sale ratio is usually concentrate in 12%-20% range. As we know in accounting, opening stock plus purchase less closing stock equal the  cost of goods sold this figure when subtracted from sales produces the gross party. Thus, accounting for stock and work-in-progress is of particular importance to the management of a firm since such treatment will affect both income measurement and financial statement. Adequate management and control policies enhance the growth and working capital policy of any firm
          Inventories must be maintained so that a customer may be served immediately or at least quickly enough so that he does not turn to another source of supply on the other hand, production operation cannot flow smooth without inventories or work-in-progress, direct materials, finished parts and supplies. Thus inventories are used to absorb expected fluctuations in demand. This help the different part of the  organization to be less dependent on each other enabling each to function effectively. The accounting task is essentially one of keeping track of all production cost incurred “under the factory roof” from the time raw materials are purchased to the time finished goods are shipped to customers. This, however includes the over heads incurred in bringing the inventories to their present location and condition which form part of the conversion cost. The necessity for adequate stock and work-in-progress recognizes the importance of optimum investment in stock and work-in-progress.
This helps to avoid the problems and cost of carrying too bulk or too large inventories.
        According to J. Fred Weston and F. Eugene Brigham “ the major determinants of investment in inventory are the level of sales, length and technical nature of the production process as well as durability versus perishability in the end product”. The movement of inventories from both receipts, issue and use need care and a measure of internal control. Usually a bincard system is used and from the records a new running balance is always maintained closely related to this perpetual inventory system is then compared with those of the bin-cards and store-keeper by a store audit check
        Discrepancies are investigated and adjustments made. The basis on which inventories are value for both charging to the manufacturing account and inclusion in the balance sheet may vary. Different method will suit firms in different industries and situations. But it must be stressed that once a firm has close to use the method, then, it should act consistently and not changing from one method to another without good reason. This is because the valuation of current assets, working capital and the financial position in general. However, the choice of valuation base will  consider the requirements of the Nigeria Accounting standards and those of the board of inland revenue. The author  of this project work deeded to under take the study stock and work-in-progress because of the far reaching effects of such stock and work-in-progress on the manufacturing firms, their owners and other users of the information.
1.2    STATEMENT OF PROBLEM
        As aforementation, stock and work-in-progress constitute after fixed assets, the largest balance sheet  item in the financial report dog manufacturing firms planning for stock and work-in-progress is an important function of the management which aims at avoiding stock- out or carrying excessive stock production purpose.  Stock-out costs are the costs incurred when there is a shortage of materials and consequently stoppage of production including:
(a)        Loss of goodwill
(b)        Loss of sales revenue
(c)         Payments of wages to idle workers and
(d)        High cost of replenishment
On the hand, excessive stock leads to a high holding cost which is represented by
(a)        Insurance premium
(b)        Handling costs
(c)         Pilferage, deteriation, damages, evaporation and obsolesce.
Interest on capital tied up that is the interest forgone in keeping the materials in  the warehouse (opportunity cost).
In our society several organizations exists without proper accounting for stock and work-in-progress. These organization buy materials at will and control stock levels by intuition or guess work. As a result, most organization either overstock or under stock materials in most organization, the stores department and purchasing department are neglected and internal control are poor. However, it does not mean that those organizations do not want to plan for stock and work-in-progress nor realize the need and importance of stock control and management. It is simply because of the death of raw materials experienced by most firms. This situation forces most firm to purchase raw materials in great quantities thereby  disregarding the regulatory system. The situation is worsened by the high exchange rate which tends to limit organization to only local sources of raw materials. Emenite limited for example, finds itself in this situation. It is therefore the objective of the researcher to examine how Emenite Limited a large manufacturing organization operates under these conditions of imperfection in relation to accounting for stock and work-in-progress
1.3    OBJECTIVES OF STUDY
        The objective of the study include:
(i)          To investigate, evaluate and draw conclusion on the accounting treatments accorded stock and work-in-progress in Emenite Limited Enugu.
(ii)         To ascertain the stock and work-in-progress of Emenite limited.
(iii)        To evaluate adequacy and effectiveness of inventory control and management in Emenite Limited including: valuation of issue to production and valuation of end of year stock, stock levels and  economic order quantity, to discover problem areas if any and make recommendation and how to improve on them.
In addition the result of this study is intended to provide thorough understanding of the theory and practice of accounting for stock and work-in-progress thereby educating the business world on matters of inventory control and  managements.
1.4    SIGNIFICANCE OF STUDY
        Since stock and work-in progress form a substantial portion of the working capital of manufacturing firms, the accounting treatment according to it is significant simply because such treatment will affect both income measurement and position statement. The accounting information provided by financial statements are used for financial and investment for tax purposes inventions for evaluation of investment viability and profitability shareholders for assessment of the management efficiency and return an investment financial houses for credit rating employers, ministry of trade and industry and the business world as a whole. The result of this study is intended to help improve the quality of financial statement. It will also be useful for future students of accounting or any person who may use it for reference while making a study on the topic or related topics.
1.6    HYPOTHESIS
        A hypothesis is a statement or assumption about am unknown population parameter. A tead performance in order to verify whether a hypothesis is true or false is called a test of hypothesis. If the result obtained from the sample drawn from the population is consistent with the hypothesis being tested, we have to accept the hypothesis otherwise we reject the hypothesis. For the  purpose of the study, the accounting procedure adopted by Emenite Limited Enugu, for stock and work-in-progress is adequate. This hypothesis will be tested at the end of this study based on the information obtained and their analysis.
1.7    BRIEF HISTORY OF EMENITE LIMITED ENUGU.
        Emenite Limited formerly known as Turnere Asbestos Limited was established on the third day of October 1961. Emenite Limited belongs to a foreigner multi-national company. This means that it was not incorporated in “Nigeria” and thus does not have the title attached to the name. Emenite limited is based in Emene near Enugu in Enugu State of Nigeria. Emenite Limited is a manufacturing company producing asbestors, fibre products such as loacter- pressure pipes. The company makes use of the following raw materials in its productive process. Cement (100%) local from Nigerian, Benue cement Markurdi  and the Eagle Cement port-harcourt, fibre (100%) input and wood pulp (70% lolad) from Nigeria Newsprint manufacturing company limited Okoroka, Akwa Ibom State.
1.8    DEFINITIO OF TERMS
Historical costs- The aggregate cost of purchase, costs of conversion and other costs incurred in bringing the inventories to their present location and condition.
 Production overhead – This comprises costs incurred from production other than direct material and labour
Internal Control – The whole system of control, financial and otherwise established by the management to enable it carry on the business if its enterprise in an orderly and efficient manner, ensure adherence to management policies, safeguard the assets and secure as far as possible the completeness  and accuracy of the records.
Cost purchase – The comprise the purchase price including import duties and other purchase, taxes, transport and handling costs and any other directly attributable cost of acquisition less trade discounts rebate and subsidies.
Net realizable value (N.R.V)- This is  estimated selling price in the ordinary course of business less cost of completion and less cost necessary to be incurred in order to make the sale.
Conversion cost – These are the costs in addition to the cost of purchase that relate to bringing the inventories to their present location and condition
Economic order quantity (EOQ) – This is calculated re-order quantity which minimizes the balances of cost between carrying cost and ordering costs.
Relevant cost- Expected future cost that will differ among alternative,
Replacement cost- This is the cost at which an identical asset could be purchased on manufactured.
Standard price – A pre-determined price fixed on the basis of a specification of all the factors affecting that price.
Absorption costing – The practice of charging all costs both variable and fixed to operations process of product.
Standard costing – The preparation and use of standard costs, their comparison with actual costs and the analysis of variance to their causes and points of incidence
 Marginal costing- The ascertainment of marginal costs and of the effect on profit of changes in volume of types of output by differentiating between fixed costs and variable cost.
Chi-Square (CI- Sqaured) distribution:- A statistical distribution that can be used to test if an observed series of values differs significantly from what was expected.

ACCOUNTING FOR STOCK AND WORK-IN-PROGRESS IN MANUFACTURING FIRMS. A CASE STUDY OF EMENITE LIMITED, ENUGU,
For more Info, call us on
+234 8130 686 500
or
+234 8093 423 853

Share This
  • Type: Project
  • Department: Accounting
  • Project ID: ACC0489
  • Access Fee: ₦5,000 ($14)
  • Chapters: 5 Chapters
  • Pages: 133 Pages
  • Methodology: Simple Percentage
  • Reference: YES
  • Format: Microsoft Word
  • Views: 2.2K
Payment Instruction
Bank payment for Nigerians, Make a payment of ₦ 5,000 to

Bank GTBANK
gtbank
Account Name Obiaks Business Venture
Account Number 0211074565

Bitcoin: Make a payment of 0.0005 to

Bitcoin(Btc)

btc wallet
Copy to clipboard Copy text

500
Leave a comment...

    Details

    Type Project
    Department Accounting
    Project ID ACC0489
    Fee ₦5,000 ($14)
    Chapters 5 Chapters
    No of Pages 133 Pages
    Methodology Simple Percentage
    Reference YES
    Format Microsoft Word

    Related Works

    ACCOUNTING FOR STOCK AND WORK-IN-PROGRESS IN MANUFACTURING FIRMS. A CASE STUDY OF EMENITE LIMITED, ENUGU, ABSTRACT This study is designed to portray the theory and practice in respect of the accounting for stock and work-in-progress is in manufacturing firms. It is helped that the knowledge presented by this study will tremendously be useful to... Continue Reading
    INTRODUCTION   It has become a well known fact that without money a business cannot function consequently an understanding of finance, which is the appreciation of the role of money and its ability to measure. The measure of a business is essential for good management. However, money can be likened to a lubricant, too little and the business is a... Continue Reading
    INTRODUCTION It has become a well known fact that without money a business cannot function consequently an understanding of finance, which is the appreciation of the role of money and its ability to measure. The measure of a business is essential for good management. However, money can be likened to a lubricant, too little and the business is a... Continue Reading
    The topics of this research work are the application of marketing control techniques in manufacturing firms in Enugu east local government: A case study of Emenite Limited Emene Enugu. In order to peruse this investigation property, the following research objectives were formulated namely: To investigate to what extent manufacturing firms have... Continue Reading
                         ABSTRACT The topics of this research work are the application of marketing control techniques in manufacturing firms in Enugu east local government: A case study of Emenite Limited Emene Enugu. In order to peruse this investigation property, the following research objectives were formulated namely: To... Continue Reading
    The topics of this research work are the application of marketing control techniques in manufacturing firms in Enugu east local government: A case study of Emenite Limited Emene Enugu. In order to peruse this investigation property, the following research objectives were formulated namely: To investigate to what extent manufacturing firms have... Continue Reading
    1.0INTRODUCTION  1.1BACKGROUND OF THE STUDY Inventory control refers to the management function concerned with the acquisition, storage, handling and usage of inventory, so as to ensure availability of inventory when needed, provide adequate cushion for contingencies and denying maximum economic benefits and at the same time minimizing wastage... Continue Reading
    1.0 INTRODUCTION 1.1 BACKGROUND OF THE STUDY Inventory control refers to the management function concerned with the acquisition, storage, handling and usage of inventory, so as to ensure availability of inventory when needed, provide adequate cushion for contingencies and denying maximum economic benefits and at the same time minimizing wastage... Continue Reading
    ABSTRACT This is a research project on inventory control procedures using Emenite Limited as a case study of manufacturing company. This study is necessitated by the fact that many manufacturing firms can no longer meet up to installed capacity due to poor management of inventories. This has led to closing down of various companies or retrenchment... Continue Reading
    INVENTORY CONTROL PROCEDURES IN MANUFACTURING ORGANIZATIONS (A CASE STUDY OF EMENITE LIMITED, EMENE) ABSTRACT This is a research project on inventory control procedures using Emenite Limited as a case study of manufacturing company. This study is necessitated by the fact that many manufacturing firms can no longer meet up to installed capacity due... Continue Reading
    Call Us
    Get this work
    whatsappWhatsApp Us