+234 813 0686 500
+234 809 3423 853
info@grossarchive.com

DESIGN OF MANUAL CHIP PACKAGING MACHINE

  • Type:Project
  • Pages:44
  • Format:Microsoft Word
(Mechanical Engineering Project Topics & Materials)
ABSTRACT
Packaging of food which is viable means of  business opportunity has been exploited by individuals and corporate bodies for a very long time because the importance of packaging food products are very enormous ranging from protection of the product to preventing the food from spoiling. There is no way one can successfully go into business of chips production without exploiting a proper means of packaging the product. Over the years, different types of packaging machines have been developed ranging from Automatic packaging machine to Semi-Automatic Packaging machine. These machines are very costly to purchase for low income earners or people with low start up capital that wish to go into the business of chip packaging. Thus this design project work was carried out to design a low cost manual chip packaging machine that people with low start up capital can afford. The detailed design was provided and the machine was eventually fabricated for operation and from the testing of the machine, it was observed that the machine can package about 30 chips package for twenty five minutesTABLE OF CONTENTS

CHAPTER ONE
1.0 Introduction
1.1Aims and objectives
1.2 Statement of problem
1.3 Relevance of the project
1.4 Scope and limitation of study
1.5 Methodology

CHAPTER TWO
2.0 Literature review
2.1 Packaging
2.2 General sealing information used in packaging of chips
2.2.2 Cold seal films
2.2.3 Heat seal films
2.3 Factors to be considered in producing a sealed package
2.3.1 Heat
2.3.2 Dwell
2.3.4 Pressure
2.3.5 Heat - dwell - pressure
2.3.6 Temperature
2.4 Films used for packaging
2.4.1 Polypropylene (pp – opp) film
2.4.2 Polyester (pet) film
2.4.3 Polyethylene (pe) film
2.5 Related mathematical formula
2.5.1 Equation to calculate the area of the packaging jaw, a
2.5.2 Equation to calculate the minimum force to be applied, fmin
2.5.3 Equation to calculate the maximum pressure to be applied for packaging, pmax
2.5.4 Equation to calculate the direct stress, σn
2.5.5 Equation to calculate the maximum stress, τmax
2.5.6 Equation to calculate the regulated pressure, pr
CHAPTER THREE
3.0 Detailed design and construction procedures
3.1 Part design
3.2 Design specifications and consideration
3.3 Design calculations
3.3.1 Determination of the area of the packaging jaw, a
3.3.2 Determination of the minimum force to be applied, fmin
      3.3.3 Determination of the maximum pressure to be applied for packaging, pmax
3.3.4 Determination of the direct stress, σn
3.3.5 Determination of the maximum stress, τmax
3.3.6 Determination of the regulated air pressure, pr
3.4. Construction details
3.4.1 The packaging jaw
The frame
3.5 Detailed mechanical drawing of the manual chip packaging machine
3.6 Materials required and selection
CHAPTER FOUR
     4.0 Test and result
4.1 Test procedure
4.2 Test results
    4.3    Table of values of the design parameters
  Safety precaution
    4.5 Operational procedure
4.6 Maintenance
  4.7 bill of engineering measurements and evaluation
CHAPTER FIVE
5.0 conclusion and recommendation
5.1 Conclusion
5.2 Recommendation
  REFERENCES
DESIGN OF MANUAL CHIP PACKAGING MACHINE

Share This

Details

Type Project
Department Mechanical Engineering
Project ID MCE0212
Price ₦3,000 ($20)
No of Pages 44 Pages
Format Microsoft Word

500
Leave a comment...

    Details

    Type Project
    Department Mechanical Engineering
    Project ID MCE0212
    Price ₦3,000 ($20)
    No of Pages 44 Pages
    Format Microsoft Word

    Related Works

    ABSTRACT Packaging of food which is viable means of business opportunity has been exploited by individuals and corporate bodies for a very long time because the importance of packaging food products are very enormous ranging from protection of the product to preventing the food from spoiling. There is no way one can successfully go into business... Continue Reading
    ABSTRACT             Parameters on which clear prints depends were comprehensively investigated.  The study revealed that clear print depends on the impressed pressure, the working temperature and the silver print paper.   Also studied were the manners of dependence of these parameters on prints impressed on sheets of varied... Continue Reading
    ABSTRACT Parameters on which clear prints depends were comprehensively investigated. The study revealed that clear print depends on the impressed pressure, the working temperature and the silver print paper. Also studied were the manners of dependence of these parameters on prints impressed on... Continue Reading
    ABSTRACT           Parameters on which clear prints depends were comprehensively investigated.  The study revealed that clear print depends on the impressed pressure, the working temperature and the silver print paper.   Also studied were the manners of dependence of these parameters on prints impressed on sheets of varied... Continue Reading
    ABSTRACT This work is an attempt to evolve a quicker and easier method of achieving cylindrical shape object from a work price. This will no double save considerable human labour and time wastage involved in traditional manual method of carving. To achieve this preliminary experiment was carried out... Continue Reading
    ABSTRACT To achieve the aim of producing a functional and efficient wood lathe machine. We analyzed and as well synthesized the different possible design solutions and concepts. We carried out the analysis of different component part of the machine to determine their suitable dimensions based on loading... Continue Reading
    THE DESIGN AND FABRICATION OF A CANDLE MOULDING MACHINE ABSTRACT The idea of producing “candle stick” brought the existence of fabricating a “candle moulding machine” which can produce a desired shape of a candle foe the benefit of mankind. In chapter 1, which is the research work of the project carried out, the problem encountered and the... Continue Reading
    CHAPTER ONE 1.0 INTRODUCTION 1.1 BACKGROUND Cassava which is known biologically as “manihotesculentacrantz” is a crop which has many varieties. Cassava, is a perennial woody shrub in the Euphorbiaceous (Spurge family) native to South America, but now grown in tropical and sub-tropical areas... Continue Reading
    ABSTRACT. A machine for corn Sheller is highly and greatly needed for consistence of usage of corn in local and international levels. With regards to this indispensable need, a corn-shelling machine is designed which operates to remove the corn grains and leaving the cobs intact. In attainment to this design objective and aims, a proper... Continue Reading
    ABSTRACT             A machine for corn shelling is highly and greatly needed to consistency of usage of corn in local and international levels.             With regards to this indispensable needs, a corn shelling machine is designed which operates to remove the corn grains and leaving the cobs intact.... Continue Reading
    Call Us
    Get this work
    whatsappWhatsApp Us