DESIGN OF A HUDRAULIC ESCALATOR

  • Type: Project
  • Department: Mechanical Engineering
  • Project ID: MCE0211
  • Access Fee: ₦5,000 ($14)
  • Pages: 52 Pages
  • Format: Microsoft Word
  • Views: 725
  • Report This work

For more Info, call us on
+234 8130 686 500
or
+234 8093 423 853
ABSTRACT
An escalator is a moving staircase conveyor transport device for carrying people between floors of a building. The device consists of a motor-driven chain of individual, linked steps that move up or down on tracks, allowing the step treads to remain horizontal.
Escalators are used around the world to move pedestrian traffic in places where elevators would be impractical. Principal areas of usage are; shopping malls, airports, transit systems, convention centers, hotels, and public buildings.
The benefits of escalators are many. They have the capacity to move large numbers of people, and they can be placed in the same physical space as one might install a staircase. They have no waiting interval (except during very heavy traffic), they can be used to guide people toward main exits or special exhibits, and they may be weatherproofed for outdoor use.
Escalators are one of the largest, most expensive machines people use on a regular basis, but they're also one of the simplest.
 At its most basic level, an escalator is just a simple variation on the conveyer belt. A pair of rotating chain loops pull a series of stairs in a constant cycle, moving a lot of people a short distance at a good speed
The escalator that was designed for this project work was designed at an inclination angle of 30 deg.







TABLE OF CONTENTS

CHAPTER ONE

1.0 Introduction

1.1aims and objectives

1.2 statement of problem

1.3 relevance of the project

1.4 scope and limitation of study

1.5 Methodology

CHAPTER TWO
2.0 Literature review
2.1 History of inventors and manufacturers of escalator
2.2 An overview of escalators
2.3 Escalator configurations
2.4 Building elevator systems
2.5 Working principle
2.6 General elevator planning
2.7 Development process
2.8 Types of elevators
2.8.1 Traction elevators
2.8.1.2 Roping Arrangements
2.8.1.2.1 One to One roping (1:1) or Traction Drum Arrangement
2.8.1.2.2 Two to One Roping (2:1) or Lifting Drum Arrangement
2.8.1.3 Counterweight
2.8.1.4 Hoist Mechanisms
2.8.1.5 Geared type:
2.8.1.6 Gearless type
2.8.2 Hydraulic elevators
2.8.2.1 Basic Types of Hydraulic Elevators
2.8.2.2 Direct acting hydraulic lifts
2.8.2.3 Working Principle of Hydraulic Elevator
2.8.2.4 Suspended Hydraulic Lifts
2.8.2.5 Working Principle of the lift



CHAPTER THREE
3.0 Description of method
3.1 procedure for the design

CHAPTER FOUR
4.0  Design process
4.1 Basic requirements (design considerations)
4.2 Development of basic solution
4.3 Detail design
4.3.1 Design of the Gear
4.3.1.1Torque transmitted    
4.3.1.2Module and face width of gear
4.3.1.3No. of teeth and pitch circle diameter of each gear
4.3.1.4 Checking the gear for wear
Detailed Engineering Drawing
4.3.2.1 Drawing of the Escalator Geometry
4.3.2.2 Drawing of the face support details
4.3.2.3 Drawing of the building interface
4.3.3 Model size
4.3.4 Passenger safety features





CHAPTER FIVE
5.0 Conclusion and Recommendation

5.1 Conclusion

5.2 Recommendation

REFERENCES

DESIGN OF A HUDRAULIC ESCALATOR
For more Info, call us on
+234 8130 686 500
or
+234 8093 423 853

Share This
  • Type: Project
  • Department: Mechanical Engineering
  • Project ID: MCE0211
  • Access Fee: ₦5,000 ($14)
  • Pages: 52 Pages
  • Format: Microsoft Word
  • Views: 725
Payment Instruction
Bank payment for Nigerians, Make a payment of ₦ 5,000 to

Bank GTBANK
gtbank
Account Name Obiaks Business Venture
Account Number 0211074565

Bitcoin: Make a payment of 0.0005 to

Bitcoin(Btc)

btc wallet
Copy to clipboard Copy text

500
Leave a comment...

    Details

    Type Project
    Department Mechanical Engineering
    Project ID MCE0211
    Fee ₦5,000 ($14)
    No of Pages 52 Pages
    Format Microsoft Word

    Related Works

    ABSTRACT In software engineering, performance testing is testing that is performed, to determine how fast some aspect of a system performs under a particular workload. It can also serve to validate and verify other quality attributes of the system, such as scalability, reliability and resource usage. Performance testing is a subset of Performance... Continue Reading
    ABSTRACT In software engineering, performance testing is testing that is performed, to determine how fast some aspect of a system performs under a particular workload. It can also serve to validate and verify other quality attributes of the system, such as scalability, reliability and resource usage. Performance testing is a subset of Performance... Continue Reading
    ABSTRACT In software engineering, performance testing is testing that is performed, to determine how fast some aspect of a system performs under a particular workload. It can also serve to validate and verify other quality attributes of the system, such as scalability, reliability and resource usage. Performance testing is a subset of Performance... Continue Reading
    ABSTRACT An equipment design project was carried out to design an inverter (Bioreator) or the production of 100,00 metric tones per year of ethanol from sugar cane. An inverter is a part of process equipment used in ethanol production from sugar cane. While the rest process equipment include crusher, filter, centrifuge, fermented, distribution... Continue Reading
    ABSTRACT An equipment design project was carried out to design an inverter (Bioreator) or the production of 100,00 metric tones per year of ethanol from sugar cane. An inverter is a part of process equipment used in ethanol production from sugar cane.  While the rest process equipment include crusher, filter, centrifuge, fermented, distribution... Continue Reading
    CHAPTER ONE 1.0 INTRODUCTION 1.1 Background of the Study For decades businesses have been relying solely on price as a competitive advantage. Even though it might have been a successful approach earlier, it no longer maintains growth and profitability in a competition between businesses. As the approach in the restaurant industry has become more... Continue Reading
    CHAPTER ONE 1.0 INTRODUCTION 1.1 Background of the Study For decades businesses have been relying solely on price as a competitive advantage. Even though it might have been a successful approach earlier, it no longer maintains growth and profitability in a competition between businesses. As the approach in the restaurant industry has become more... Continue Reading
    CHAPTER ONE 1.0               INTRODUCTION 1.1       Background of the Study              For decades businesses have been relying solely on price as a competitive advantage. Even though it might have been a successful approach earlier, it no longer maintains growth and profitability in a competition between... Continue Reading
    Abstract This project outlines the structural design of eight-storey reinforced concrete hostel building following British standard, BS: 8110, part 1, 1997 “Structural use of Concrete”. The project aimed at producing structural design of eight storey hostel. The research was achieved based on the objectives of; developing structural layout... Continue Reading
    Abstract This project outlines the structural design of eight-storey reinforced concrete hostel building following British standard, BS: 8110, part 1, 1997 “Structural use of Concrete”. The project aimed at producing structural design of eight storey hostel. The research was achieved based on the objectives of; developing structural layout... Continue Reading
    Call Us
    Get this work
    whatsappWhatsApp Us