+234 813 0686 500
+234 809 3423 853
info@grossarchive.com

BURGLAR ALARM UNIT

  • Type:Project
  • Pages:24
  • Format:Microsoft Word
(Electrical Engineering Project Topics & Materials)
INTRODUCTION
As the world is developing the need for electronics in human endeavor is now taking a larger scope. With the invention of certain electronics gadgets in our societies today, certain activities become easily handled for example; in communication where the telephone plays a part.  In places where safety are needed an alarm system will be of much important.

The application of electronics in this modern age is simply inexhaustible and this group form more interest in the alarm system after negotiating the increase in the case of burglaries in homes, cars, etc.  The selection of a proper alarm is not a simple matter because the need of each individual home owners or businessman is different like a set of finger prints. 

Some factors and question which must be answered when selecting an alarm system include:-
a. What system need be protected?
b. What type of sensor are needed?
c. The method of transmission needed for the alarm signal
The purpose of producing the intruder alarm system is to limit this effect of the criminology in the society by informing us that our property are in danger.  All these will bring alarm the way by which criminal break into private properties by searing them away once the alarm is trigged.

TABLE OF CONTENTS
TITLE PAGE
APPROVAL PAGE
DEDICATION
ACKNOWLEDGEMENT
TABLE OF CONTENTS

CHAPTER ONE
INTRODUCTION

CHAPTER TWO
- Block diagram and circuit implementation of proposed burglar alarm unit
- The power supply section (battery) 
- Procedure of operation of the battery
- Power supply section (alternating current)
- Alarm section
- Amplification section

CHAPTER THREE
- Construction of an intruder alarm system

CHAPTER FOUR
- System construction
- Operation of the system

CHAPTER FIVE
- Function of components
- Integrated circuit
CHAPTER SIX
- Conclusion
- Bibliography








BURGLAR ALARM UNIT

Share This

Details

Type Project
Department Electrical Engineering
Project ID ELE0231
Price ₦3,000 ($9)
No of Pages 24 Pages
Format Microsoft Word

500
Leave a comment...

    Details

    Type Project
    Department Electrical Engineering
    Project ID ELE0231
    Price ₦3,000 ($9)
    No of Pages 24 Pages
    Format Microsoft Word

    Related Works

    ABSTRACT Burglar alarm circuit is made up of five major sections. The power supply section; it connects to the source of power, the trigger section which produces trigger current, touch section that controls the supply of power in the circuit, alarm section that sounds when current... Continue Reading
    ABSTRACT As the world is developing the need for electronics in human endeavor is now taking a larger scope. With the invention of certain electronics gadgets in our societies today, certain activities become easily handled for example; in communication where the telephone plays a part.  In places where safety are needed an alarm system will be... Continue Reading
    ABSTRACT The intruder alarm system was designed and build in order to let the industrial and commercial company know how important alarm system is all about. These can be of Good help if the intruder will look through this project and support for the development of this project as to let the Federal Government know that the young engineering of... Continue Reading
    ABSTRACT The main objective of this project was to ensure a proper security to car being parked in garage against theft or an intruder. The circuit uses three NE555 timers; one of the NE555 was wired as a monostable oscillator and remaining two were wired as tone generator and amplified to obtain a maximum audible sound. However, pin 2 of the... Continue Reading
    ABSTRACT This work is a power supply monitoring device that triggers a buzzer when the mains supply cuts off. Thus a diode (bridge rectifier diode) was used to convert the AC voltage to DC voltage and the 240v/12v AC mains power transfer was used with a bridge rectifier for rectification and a 470Nf filter capacitor C1 for the smoothing of the... Continue Reading
    ABSTRACT The main objective of this project was to ensure a proper security to car being parked in garage against theft or an intruder. The circuit uses three NE555 timers; one of the NE555 was wired as a monostable oscillator and remaining two were wired as tone generator and amplified to obtain a maximum audible sound. However, pin 2 of the... Continue Reading
    CONSTRUCTION OF CAR TOUCH INTRUDER ALARM ABSTRACT The main objective of this project was to ensure a proper security to car being parked in garage against theft or an intruder. The circuit uses three NE555 timers; one of the NE555 was wired as a monostable oscillator and remaining two were wired as tone generator and amplified to obtain a maximum... Continue Reading
    ABSTRACT This project the design an construction of fire alarm was carried out with deep intensive and extensive research work my aim and objective in the price of work is to produce a standard device or electronics that will inform the security about a fire outbreak in the company or house for a quick reaction/action. In this project I shade more... Continue Reading
    ABSTRACT The intruder alarm system was designed and build in order to let the industrial and commercial company know how important alarm system is all  about. These can be of Good help if the intruder will look through this project and support for the development of this project as to let the Federal Government know that the young engineering of... Continue Reading
    ABSTRACT The term “critical point” is sometimes used to denote specifically the vapour-liquid critical point of a material. The vapour-liquid   point denotes the condition above which distinct liquid and gas phases so not exist. The project, the construction of critical temperature measuring instrument is aimed at measuring the critical... Continue Reading