+234 813 0686 500
+234 809 3423 853
info@grossarchive.com

THE CONSTRUCTION OF INDUSTRIAL FAN FOR WORKSHOP USE

  • Type:Project
  • Pages:34
  • Format:Microsoft Word
(Mechanical Engineering Project Topics & Materials)
ABSTRACT 
This work is aimed at the removal of hazardous gases and dust particles, air channeling etc. This work is aimed at achieving industrial waste control therein safe – guarding the immediate environment. 
Chapter one accounts for the introduction of the project. Chapter two involves literature review in the origin, types and alternative device is compared. Chapter three discussed the design analysis of the project. In chapter four, the sequence of operation and material selection for the construction of the project were discussed. In chapter five, the average cost of material, labor and other attached costs were analysed and the total sum was ascertained. In chapter six, the project was tested for functionality and its performance was satisfactory and then recommendations for alternations in future and applications and a final conclusion was the last section. 

TABLE OF CONTENTS
Title Page
Approval Page
Dedication 
Acknowledgement 
Abstract
Table of Contents
Table of Illustrations 

CHAPTER 1: INTRODUCTION

CHAPTER 2: LITERATURE REVIEW
2.1 Origin of Fans
2.2 Types of Fans
2.3 Blowers
2.3.1 Definition and Capacity of Blowers
2.3.2 Operating Principles for Blowers
2.3.3 Applications of Blowers
2.3.4 Advantages of Blowers
2.3.5 Material Selection for Blowers 
2.4 Types of Blowers

CHAPTER 3: DESIGN OF INDUSTRIAL FAN
3.1 Basics of Lift and Drag
3.1.1 Conventions for Lift and Drag Forces
3.1.2 Forces on a Flat Surface
3.1.3 Forces on a Curved Surface 
3.2 Kinematics of the Blade
3.3 Blade – Fluid Interaction
3.4 CD and CL as Functions of Angle of Attack 

CHAPTER FOUR: MATERIAL SELECTION AND SEQUENCE OF OPERATION
4.1 Material Selection
4.2 Sequence of Operation

CHAPTER FIVE: COST ANALYSIS
5.1 Material Cost
5.2 Direct Labour Cost 
5.3 Overhead Cost

CHAPTER SIX: PERFORMANCE EVALUATION, RECOMMENDATIONS AND CONCLUSIONS
6.1 Performance Evaluation 
6.2 Recommendation
6.3 Conclusions
References

THE CONSTRUCTION OF INDUSTRIAL FAN FOR WORKSHOP USE

Share This

Details

Type Project
Department Mechanical Engineering
Project ID MCE0196
Price ₦3,000 ($9)
No of Pages 34 Pages
Format Microsoft Word

500
Leave a comment...

    Details

    Type Project
    Department Mechanical Engineering
    Project ID MCE0196
    Price ₦3,000 ($9)
    No of Pages 34 Pages
    Format Microsoft Word

    Related Works

    ABSTRACT An Industrial barrow was produced which would aid in conveying heavy materials in the laboratory and industrial set up. It was made from mild steel that was cut to dimension, made into shape and coupled to form the desired outstanding barrow. Details are shown in chart (fig 1) containing the picture... Continue Reading
    ABSTRACT Industrial mixer is equipment designed to carryout operation involved the combination of two or more substance to achieve a uniform product. The method of fabrication of this mixer involves a preliminary computation of the dimensions of the standard which they will be used in marketing out cutting, out to... Continue Reading
    ABSTRACT The constructional project involved the construction of an industrial barrow of standard size was constructed. The process used went across various Engineering practice. These involved the procurement of galvanized steel of 0.00mm to 300mm thickness. Some galvanized steel rods and pipes were also used for the construction. The Engineering... Continue Reading
    ABSTRACT This is the summary of the research work form chapter one to five. It actually contain what research works suppose to contain except background of the study and objective of the study. Look at the chapter 3 and 4 it is properly done, it is telling us how the data collected is presented and then analyzed. TABLE OF CONTENT Title page... Continue Reading
    ABSTRACT This is the summary of the research work form chapter one to five. It actually contain what research works suppose to contain except background of the study and objective of the study. Look at the chapter 3 and 4 it is properly done, it is telling us how the data collected is presented and then analyzed. TABLE OF CONTENT Title page... Continue Reading
    ABSTRACT Wheel barrow can be defined as a simple machine used in transferring heavy loads materials from one place to another by pushing. It can be used or serve as farm equipment, industrial equipment and for other purpose. How ever, mateials used for the cnstruction of wheelbarrow are bought in standard... Continue Reading
    ABSTRACT           Wheel barrow can be defined as a simple machine used in transferring heavy loads materials from one place to another by pushing. It can be used or serve as farm equipment, industrial equipment and for other purpose.           How ever, mateials used for the cnstruction of wheelbarrow are bought in standard... Continue Reading
    ABSTRACT Wheelbarrow is a simple machine, which belong to the second-class lever. This is because the load or resistance is placed between the effort and the fulcrum. It is used in many areas of work to convey loads that are too heavy or bulky to be carried by hand. Wheelbarrow can be used as farm equipment, industrial equipment among others.... Continue Reading
    ABSTRACT Wheelbarrow is a simple machine, which belong to the second-class lever. This is because the load or resistance is placed between the effort and the fulcrum. It is used in many areas of work to convey loads that are too heavy or bulky to be carried by hand. Wheelbarrow can be used as farm equipment, industrial equipment among others.... Continue Reading
    ABSTRACT The construction of Sieve Industrial Sieve Compartment was carried out in the Engineering Workshop, Institute of Management and Technology, Enugu. The aim of this project is to fabricate an industrial sieve compartment which is capable of separating solid particles of various sizes. The... Continue Reading