+234 813 0686 500
+234 809 3423 853
info@grossarchive.com

PRODUCTION OF EMULSION POINT WITH THE AVAILABLE MATERIAL

  • Type:Project
  • Pages:44
  • Format:Microsoft Word
(Chemical Engineering Project Topics & Materials)
ABSTRACT
This project is on the production of paint from the available materials.  The first process involved was the sourcing of the available material which include calcium carbonate (dotonute) water etc.  the next step is the proper production procedure.  The  same product patterns was employed while the production was valued with a view to obtain a high quality paint.

From the result obtained, it was observed that high quality paint was produced in production category C(3), consisting of 10kg water, 0.1kg titanium  dioxide (TiO2), 0.3kg teranol, 0-3 ethylene glycol 0.3kg welting agent, 0.1kg defrayer, 0.2kg thickness 10kg CaCO3, 4kg PVA, 2kg NH3 and 0.5kg white spirit.

The above fact was ascertained by subjecting the various paint produced from different production procedure to quality control test.  The quality of this paint in production category C(3) was, opacity 2 coat, PH 8, drying time 1 hour, chalking 190 cycle scrubs, PVA 20%, viscosity 3.8 poises and binder gravity 1.17 and its quality marched with the Standard Organization of Nigeria (SON) approved quality.


TABLE OF CONTENT
Title page
Letter of transmittal
Approval page
Dedication
Acknowledgement
Table of content
Abstract

Chapter one
Introduction

Chapter two
Historical review of paint product
Types of paints
Raw materials for paint production
Quality control test

Chapter three
Production formulation of paint
Method of production
Standard quality of paint

Chapter four
Observation discussions

Chapter five
Conclusion/recommendation
References











PRODUCTION OF EMULSION POINT WITH THE AVAILABLE MATERIAL

Share This

Details

Type Project
Department Chemical Engineering
Project ID CNG0262
Price ₦3,000 ($9)
No of Pages 44 Pages
Format Microsoft Word

500
Leave a comment...

    Details

    Type Project
    Department Chemical Engineering
    Project ID CNG0262
    Price ₦3,000 ($9)
    No of Pages 44 Pages
    Format Microsoft Word

    Related Works

    ABSTRACT This project is on the production of paint from the available materials.  The first process involved was the sourcing of the available material which include calcium carbonate (dotonute) water etc.  the next step is the proper production procedure.  The  same product patterns was employed while the production was valued with a view to... Continue Reading
    ABSTRACT The major aim of this project research work is to produce emulsion paint from locally sourced pigment & extenders. The materials used for the production was of local source. The major raw materials used for the production of the emulsion paint: water, titanium iv oxide, calcium carbonate, kaoline, calgon, natrosol, biocide P.V.A, ammonia,... Continue Reading
    ABSTRACT The major aim of this project research work is to produce emulsion paint from locally sourced pigment & extenders. The materials used for the production was of local source. The major raw materials used for the production of the emulsion paint: water, titanium iv oxide, calcium carbonate, kaoline, calgon, natrosol, biocide P.V.A, ammonia,... Continue Reading
    THE USE OF LOCAL PIGMENTS AND EXTENDERS FOR FORMULATION & PRODUCTION OF EMULSION PAINT ABSTRACT The major aim of this project research work is to produce emulsion paint from locally sourced pigment & extenders. The materials used for the production was of local source. The major raw materials used for the production of the emulsion paint:... Continue Reading
    ABSTRACT The major aim of this project research work is to produce emulsion paint from locally sourced pigment & extenders. The materials used for the production was of local source. The major raw materials used for the production of the emulsion paint: water, titanium iv oxide, calcium carbonate, kaoline, calgon, natrosol, biocide P.V.A,... Continue Reading
    ABSTRACT The concept of this project is to actualize a practical way of paint production using a locally design mixing machine which is design to meet a low cost and high standard paint. The project cut across all forms of engineering, such as mechanical machine design of a simple industrial mixer, which is driven by an electrically made device, a... Continue Reading
    ABSTRACT             The concept of this project is to actualize a practical way of paint production using a locally design mixing machine which is design to meet a low cost and high standard paint.             The project cut across all forms of engineering, such as mechanical machine design of a simple industrial mixer,... Continue Reading
    ABSTRACT           The concept of this project is to actualize a practical way of paint production using a locally design mixing machine which is design to meet a low cost and high standard paint.           The project cut across all forms of engineering, such as mechanical machine design of a simple industrial mixer, which is... Continue Reading
    ABSTRACT The concept of this project is to actualize a practical way of paint production using a locally design mixing machine which is design to meet a low cost and high standard paint. The project cut across all forms of engineering, such as mechanical machine... Continue Reading
    ABSTRACT This project focused on the production of emulsion paint, the raw materials, and the possible problems that may be encountered in the course of production. Also, substandard emulsion paint is one of the problems facing users of emulsion paint, however, this project work produced an emulsion paint with unique characteristics which is of... Continue Reading