+234 813 0686 500
+234 809 3423 853
info@grossarchive.com

PRODUCTION OF LOQUID AND VAPOURIZED PERFUME

  • Type:Project
  • Pages:95
  • Format:Microsoft Word
(Chemical Engineering Project Topics & Materials)
ABSTRACT
This research project was carried out principally for the production of liquid and vapourized perfumes from local raw materials.  The local raw material were subjected to various processing conditions in order to obtain purified perfume.  The methods generally used in this work include expression steam distillation and solvent extraction.

During the production of vapourized and liquid perfume the modern solvent for blending and holding perfume materials is highly refined ethanol mixed with more or less water according to the solubilities of the oils employed.  This solvent with its volatile nature helps to project the scent it carries, and it is fairly inert to the solute and is not too irritating to the human skin.

The slight natural odour of the alcohol   is remove by deodorizing of the alcohol.  This is accomplished by adding a small amount of gum benzoic or other resinous fixatives to the alcohol and allowing it to mature for a week or two.  The result is an almost odorless alcohol, the natural rawness having been neutralized by the resins.  Other vehicles added to this includes benzene which is a solubilizer and methanol in their required proportions.

For vaporized perfumes , it has light quantity benzene while the liquid perfume has little   or no of benzene and it contains more of the fragrance than the vapourized perfume.

However, it can be concluded that liquid and vapourized perfumes can be produced using local raw materials.
 
TABLE OF CONTENTS
Contents page
Cover page
Title page
Approval page
Dedication
Acknowledgement 
Abstract 
Table of content

CHAPTER ONE INTRODUCTION
Motivation
Objective of the project

2.0 CHAPTER TWO LITRETURE REVIEW
2.1 Brief description of perfumes
2.2 Historical background of perfumes
2.3 Classification of perfumes
2.4 Uses, application and general

Importance of perfumes
2.5 Raw material used in perfumery 
2.6 Chemical composition and chemistry of perfumes
2.7 Quantity standards and physical characteristic
2.8 General method of isolating essential oil 
2.9 Formulation procedure of perfumes

3.0 CHAPTER THREE EXPERIMENTAL
3.1 Raw material
3.2 Equipment and general process description
3.3 Exaction procedures 
3.4 Perfumes compounding and formulation
3.5 Characterization  of perfume

4.0 CHAPTER FOUR RESULT AND DISCUSSIONS
4.1 Results
4.2 Analysis and discussion of result

5.0 CHAPETR FIVE COCLUSION AND RECOMMANDATION
5.1 Conclusion
5.2 Recommendations
5.3 General recommendations
Reference 
Appendix
 

PRODUCTION OF LOQUID AND VAPOURIZED PERFUME

Share This

Details

Type Project
Department Chemical Engineering
Project ID CNG0261
Price ₦3,000 ($9)
No of Pages 95 Pages
Format Microsoft Word

500
Leave a comment...

    Details

    Type Project
    Department Chemical Engineering
    Project ID CNG0261
    Price ₦3,000 ($9)
    No of Pages 95 Pages
    Format Microsoft Word

    Related Works

    ABSTRACT This research project was carried out principally for the production of liquid and vapourized perfumes from local raw materials.  The local raw material were subjected to various processing conditions in order to obtain purified perfume.  The methods generally used in this work include expression steam distillation and solvent... Continue Reading
    CHAPTER ONE 1. 1 INTRODUCTION The word perfume derives from the latin ―per fumum‖ meaning through smoke, is fragrant liquid that is sprayed or rubbed on the skin or clothes to give a pleasant smell. Extraction of perfume from various plants resources is of ancient origin. Infact the natives from different tropical regions of the globe have... Continue Reading
    CHAPTER ONE 1. 1 INTRODUCTION The word perfume derives from the latin ―per fumum‖ meaning through smoke, is fragrant liquid that is sprayed or rubbed on the skin or clothes to give a pleasant smell. Extraction of perfume from various plants resources is of ancient origin. Infact the natives from different tropical regions of the globe have... Continue Reading
    ABSTRACT The word perfume derives from the latin ―per fumum‖ meaning through smoke, is fragrant liquid that is sprayed or rubbed on the skin or clothes to give a pleasant smell. Extraction of perfume from various plants resources is of ancient origin. Infact the natives from different tropical regions of the globe have long been extracting oil... Continue Reading
    CHAPTER ONE INTRODUCTION 1.1 Background Perfume is a fragrant liquid made from an extract that has been distilled in alcohol and water. Since the beginning of recorded history, humans have attempted to mask or enhance their own odor by using perfume, which emulates nature’s pleasant smells. Many natural and man-made materials have been used to... Continue Reading
    ABSTRACT Perfume extraction refers to the extraction of aromatic compounds from raw materials, using methods such as distillation, solvent extraction, expression or enfleurage. The extracts are either essential oils, absolutes, concretes, or butters, depending on the amount of waxes in the extracted product. Heat, chemical solvents, or exposure to... Continue Reading
    IN ENUGU METROPOLIS ABSTRACT Price plays a very important role both within the organization and in the national economy. For example, if consumers accept a product at a fairly high price, the producer will be certain of covering his cost as well as paying the staff well and still making... Continue Reading
    TABLE OF CONTENTS Title page Approval Page Declaration Page Dedication Page Acknowledgement Abstract Table of Contents CHAPTER ONE INTRODUCTION 1.1Background of the Study 1.2Statement of the Problem 1.3Aims and Objectives 1.4Statement of Hypothesis 1.5Significance of the Study 1.6Scope of the Study 1.7Limitation of the Study 1.8Historical... Continue Reading
    The introduction Methodology Materials needed Characteristics of bacillus that can produce amylase isolated from Palm kernel waste water in the production of local palm oil Characteristics of bacillus specie that have the potential to bioflocculate isolated from Palm kernel waste water in the production of local palm oil Aim and objectives of the... Continue Reading
    ABSTRACT The project dealt on the production of yam flour from yam chips. The yams were peeled and washed, 100grams samples coded sample A to G were subjected to two different drying conditions. Some were dried using the sun drying method while the others were dried through oven drying method kept at constant... Continue Reading