+234 813 0686 500
+234 809 3423 853
info@grossarchive.com

FABRICATION OF A METALLIC BOOKSHELF

  • Type:Project
  • Pages:24
  • Format:Microsoft Word
(Mechanical Engineering Project Topics & Materials)
ABSTRACT 
Knowledge could only be obtained successively by the use of books for research. This can be achieved only by preserving books already purchased. As a result we fabricate a metallic shelf made up of metallic sheet; precisely mild steel sheets. The mild steel used for the fabrication of the shelf is 1.5mm (16gauge) mild steel. 
The shelf is made up of 3 partitions. In fabricating the metallic shelf several process where involved. We plundered on the material to be used that can hold the number of the books i.e. the strength of the material.
Thereafter accurate measurements of the mild sheets were made we also considered the rigidity of the metallic shelf. This led us to using square pipes for the support of the shelf. The square pipes were also measured to give the dimensions use.
The already cut square pipes were used form the frame by welding it together. Then the already measured and cut mild sheets were also welded to the frame. The doors are made up of the square pipes and wire gauze welded together. The shelf was also painted to give good outlook after smoothening and filling. Rollers were also fixed beneath to enhance good and easy movement of the shelf due to its weight. 

TABLE OF CONTENT
Title Page
Letter of Transmittal 
Release Page 
Signature Page
Approval Page
Dedication 
Acknowledgement
Abstract 

CHAPTER ONE 
1.1 Introduction 
1.2 Description of the bookshelf

CHAPTER TWO 
2.1 Mode of Operation 
2.2 Material selection 

CHAPTER THREE
3.1 Fabrication
3.2 Fabrication Analysis
3.3 Capacity of The Bookshelf
3.4 Fabrication Experiment
3.5 Construction
3.6 Sequence of Operation

CHAPTER FOUR 
4.1 Cost of Analysis

CHAPTER FIVE
5.1 Conclusion 
5.2 Recommendation 
Reference

FABRICATION OF A METALLIC BOOKSHELF

Share This

Details

Type Project
Department Mechanical Engineering
Project ID MCE0188
Price ₦3,000 ($9)
No of Pages 24 Pages
Format Microsoft Word

500
Leave a comment...

    Details

    Type Project
    Department Mechanical Engineering
    Project ID MCE0188
    Price ₦3,000 ($9)
    No of Pages 24 Pages
    Format Microsoft Word

    Related Works

    ABSTRACT Knowledge could only be obtained successively by the use of books for research. This can be achieved only by preserving books already purchased. As a result we fabricate a metallic shelf made up of metallic sheet. Precisely mild steel sheets. The mild steel used for the fabrication of the shelf is 1.5mm (16gauge) mild steel. The shelf is... Continue Reading
    ABSTRACT Books are used recoding of what is happening or event that has already taken place which can be storing information it is useful and for the information that such books contained not to cost it support to be properly kept and these can be done when those books are kept in a cool dry place and a place free from rodents and insects attacked... Continue Reading
    ABSTRACT In our society today reading and writing has taken its roll as a way of measuring human knowledge. Knowledge could only be obtain successively by the use of books for research but unfortunately because of hard time, books have because very expensive. This has called for preservation of... Continue Reading
    ABSTRACT Knowledge could only be obtained successfully by the use of book for research but unfortunately because of hard times, books have become very expensive.  This is called for presentation of books already purchased whether in the library or on the household so that it can be used by the future generation.  There could only be done by... Continue Reading
      INTRODUCTION A bookshelf or bookcase is a furniture with horizontal shelves, used to store books. Wood stall remains the chide construction material used in the construction of thus bookshelf, although a transport glass is used for covering parts of the bookshelf to avoid intruders from having access to the equipment and books to be stored in... Continue Reading
    CHAPTER ONE 1.0 INTRODUCTION The equipment mostly used in the industries and manufacturing establishments requires the production of definite shape, pattern, different design, embossments and others, are usually moulds. The ability of moulds to withstand pressure, distortion and corrosion determines the... Continue Reading
    CHAPTER ONE 1.0 INTRODUCTION The equipment mostly used in the industries and manufacturing establishments requires the production of definite shape, pattern, different design, embossments and others, are usually moulds. The ability of moulds to withstand pressure, distortion and corrosion determines the... Continue Reading
    PRAFACE Based the fact, for humans quest to belted and secure things he uses and have them arranged in place without being transfer, like the files tea books, important to man for future wage and academic excel. To this end, in which this written articles need to be presented, we embarked on the... Continue Reading
    ABSTRACT This project aims at designing and constructing a book metallic shelf hose capability will be to contain different standard sizes of books at minimum paces. What is taken into consideration in this project are the cost of its production, processes, and maintenance. Other considerable factors are the functional aspect of the... Continue Reading
    DESIGN AND CONSTRUCTION OF A METALLIC BOOK SHELF ABSTRACT This project aims at designing and constructing a book metallic shelf hose capability will be to contain different standard sizes of books at minimum paces. What is taken into consideration in this project are the cost of its production, processes, and maintenance. Other considerable... Continue Reading