DESIGN AND CONSTRUCTION OF ALCOHOL DETECTOR

  • Type: Project
  • Department: Medical and Health Science
  • Project ID: MHS0119
  • Access Fee: ₦5,000 ($14)
  • Pages: 32 Pages
  • Format: Microsoft Word
  • Views: 1.4K
  • Report This work

For more Info, call us on
+234 8130 686 500
or
+234 8093 423 853


ABSTRACT


An alcohol detector: - is a electronic device that detect alcohol in the breath of a person that has consumed the liquire. In this project, the design involved the hardware module and software module. The hardware module consist of sensor circuit (MQ – 3), the pic (Microcontroller circuit), the L.C.D. Circuit and the alarm circuit. The software module include, the programming on plc microcontroller that sends the information to the encoder using C – programming, the sensor detects the alcohol  and then signal to the micro controller and display the result on the L.C.D upon the assembly. Then the buzzer alarm will start ringing, the alcohol detector is able to detect alcohol in the breath of the person.


 


 



 


TABLE OF CONTENT


Title page        -           -           -           -           -           -           -           -           -           -           i


Certification page       -           -           -           -           -           -           -           -           -           ii


Dedication      -           -           -           -           -           -           -           -           -           -           iii


Acknowledgement      -           -           -           -           -           -           -           -           -           iv


Abstract          -           -           -           -           -           -           -           -           -           -           v


Table of content                      -           -           -           -           -           -           -           -           vi


CHAPTER ONE


1.0              Introduction    -           -           -           -           -           -           -           -           -           1


1.1       Aim and objective       -           -           -           -           -           -           -           -           1


1.2       Scope of the study      -           -           -           -           -           -           -           -           1


1.3       Justification and significant of the study       -           -           -           -           -           2


1.4       Mode of operation      -           -           -           -           -           -           -           -           2


1.5       Mode of design           -           -           -           -           -           -           -           -           2


CHAPTER TWO: LITERATURE REVIEW


2.1       Alcohol detector background             -           -           -           -           -           -           -           8


2.2       Brief History on Alcohol detector      -           -           -           -           -           -           8


2.3       Infrared spectroscopy (intoxilyer) model       -           -           -           -           -           9


2.4       The talking breathalzer mark -            -           -           -           -           -           -           10


2.5       MQ – 3 Gas Sensor     -           -           -           -           -           -           -           -           10


2.6       Alcohol in breath        -           -           -           -           -           -           -           -           13


2.7       Blood Alcohol concentration (BAC)  -           -           -           -           -           -           13


 


 


 


CHAPTER THREE


DESIGN AND CONSTRUCTION  -           -           -           -           -           -           -           15


Sensor circuit              -           -           -           -           -           -           -           -           -           18


Microcontroller           -           -           -           -           -           -           -           -           -           18


Architecture of PIC 16f877    -           -           -           -           -           -           -           -           18


LCD unit         -           -           -           -           -           -           -           -           -           -           23


LCD mode      -           -           -           -           -           -           -           -           -           -           23


LCD operating voltage           -           -           -           -           -           -           -           -           23


Regulated power supply         -           -           -           -           -           -           -           -           23


CHAPTER FOUR


Result and discussion                         -           -           -           -           -           -           -           -           24


Result and testing       -           --          -           -           -           -           -           -           -           24


Software testing          -           -           -           -           -           -           -           -           -           24


Hardware testing        -           -           -           -           -           -           -           -           -           24


Pre implementation testing     -           -           -           -           -           -           -           -           25


Post – implementation testing             -           -           -           -           -           -           -           25


Conclusion      -           -           -           -           -           -           -           -           -           -           25


Recommendation        -           -           -           -           -           -           -           -           -           25


Reference        -           -           -           -           -           -           -           -           -           -           26


 


 


 


 


 


 



 


CHAPTER ONE


1.0       INTRODUCTION


This report presents the progress in using a alcohol detector, a device that senses a change in the alcoholic gas content of the surrounding air. The sensor will then analyse the amount of alcoholic vapors and offer the user some indication of the amount of alcohol present. Nowadays alcohol sensor plays a significant role in our society and it has vast application. This project detect the content of alcohol in the breath and thus it attempt to clap down alcoholic. This project use PIC16F877A, LCD display, MQ-3 alcohol sensor and buzzer. The output of the sensor is directly proportional to the content of alcohol consumed. We try to develop this project to make it available for everyone. This project won’t cost much, but it will bring much for it concentrate to humans safety. This project has a preventative effect which can stop accident from the beginning. In this project, initially we check whether the person id drunk or not by using the MQ-3 alcohol sensor. In this project sensor circuit is used to determine if a person has consumed alcohol or not. To this end, we have designed such a system that when alcohol is detect alarm is raised.


1.2       AIMS AND OBJECTIVES


The aims of this report is to design and construct an alcohol detector that sound alarm with the aid of buzzer.


-           To design the power supply circuit


-           To design and construct an alcohol detector which will detect alcohol in the breath through the MQ-3 sensor and pass the information to the micro controller and display the output through the L.C.D (Ayala, 8051).


1.3       SCOPE OF THE PROJECT


The Scope of study is to detects the content of alcohol in the breath and thus it attempts to clamp down alcoholics. This project include the following criteria: -


i.          The study and application of MQ-3 sensor


ii.         Architecture of PIC16F877A


iii.        The PIC micro controller using C language programming


iv.        The LCD display the buzzer alarm


v.         The knowledge of soldering and soldering of electronics.


1.4       JUSTIFICATION AND SIGNIFICANT OF THE PROJECT


By completing this project: -


DESIGN AND CONSTRUCTION OF ALCOHOL DETECTOR

For more Info, call us on
+234 8130 686 500
or
+234 8093 423 853

Share This
  • Type: Project
  • Department: Medical and Health Science
  • Project ID: MHS0119
  • Access Fee: ₦5,000 ($14)
  • Pages: 32 Pages
  • Format: Microsoft Word
  • Views: 1.4K
Payment Instruction
Bank payment for Nigerians, Make a payment of ₦ 5,000 to

Bank GTBANK
gtbank
Account Name Obiaks Business Venture
Account Number 0211074565

Bitcoin: Make a payment of 0.0005 to

Bitcoin(Btc)

btc wallet
Copy to clipboard Copy text

500
Leave a comment...

    Details

    Type Project
    Department Medical and Health Science
    Project ID MHS0119
    Fee ₦5,000 ($14)
    No of Pages 32 Pages
    Format Microsoft Word

    Related Works

    A BSTRACT The project work titled Design and construction of a metal detector. When fully design and implemented would be able to detect any metallic material that is passing or coming close. This function would serve as a security check for dangerous metallic material as an alarm. Going by the sophisticated means of armed rubbers adopt these days... Continue Reading
    ABSTRACT The project work titled Design and construction of a metal detector. When fully design and implemented would be able to detect any metallic material that is passing or coming close. This function would serve as a security check for dangerous metallic material as an alarm. Going by the sophisticated means of armed rubbers adopt these days... Continue Reading
    ABSTRACT             This project is design and construction of a sound detector with alarm system was done primarily to detector sound. It can be use in industrial and domestics. It employ four discreet stages with power supply which power the system.             The 1st block is pick up amplifier containing the microphone... Continue Reading
    ABSTRACT This project deals on the design and construction of an intruder detector for home and office use. Security as one of the biggest issues in our world today and we need a system that will be able to monitor our home, offices and industries by using two sensing... Continue Reading
    ABSTRACT This project is design and construction of a sound detector with alarm system was done primarily to detector sound. It can be use in industrial and domestics. It employ four discreet stages with power supply which power the system. The 1st block is pick up amplifier containing... Continue Reading
       Abstract The project DESIGN AND CONSTRUCTION OF A 20-METRE DISTANCE REMOTELY  CONTROLLED METAL DETECTOR is used for detecting metallic objects such as phones,  bombs, and other metallic objects that are hidden from view. The design is based on the principle  of the Resonant Frequency Oscillator (RFO) metal detectors in which oscillation is... Continue Reading
    Abstract The project DESIGN AND CONSTRUCTION OF A 20-METRE DISTANCE REMOTELY CONTROLLED METAL DETECTOR is used for detecting metallic objects such as phones, bombs, and other metallic objects that are hidden from view. The design is based on the principle of the Resonant Frequency Oscillator (RFO) metal detectors in which oscillation is a function... Continue Reading
    Abstract The project DESIGN AND CONSTRUCTION OF A 20-METRE DISTANCE REMOTELY CONTROLLED METAL DETECTOR is used for detecting metallic objects such as phones, bombs, and other metallic objects that are hidden from view. The design is based on the principle of the Resonant Frequency Oscillator (RFO) metal detectors in which oscillation is a function... Continue Reading
    ABSTRACT This project work deals on the Design and Construction of Intruder Detector Alarm System with Direction/Location Displaywhich is capable of detecting intrusion at any location, sound and alarm and display the exact location of the intruder using... Continue Reading
    ABSTRACT Metal detectors are electronics sensors that indicate the presence of metallic object without making physical contact with object. They are effective and useful security tools employed in strategic places such as airport, bank, stadiums, government houses and also in production industries to detect presence of metallic object on person... Continue Reading
    Call Us
    Get this work
    whatsappWhatsApp Us