+234 813 0686 500
+234 809 3423 853
info@grossarchive.com

DESIGN AND CONSTRUCTION OF SOUND DETECTOR WITH ALARM SYSTEM

  • Type:Project
  • Chapters:5
  • Pages:32
  • Methodology:Scientific Method
  • Reference:YES
  • Format:Microsoft Word
(Electrical Engineering Project Topics & Materials)
DESIGN AND CONSTRUCTION OF SOUND DETECTOR WITH ALARM SYSTEM
ABSTRACT

            This project is design and construction of a sound detector with alarm system was done primarily to detector sound. It can be use in industrial and domestics. It employ four discreet stages with power supply which power the system.
            The 1st block is pick up amplifier containing the microphone and the input which serve as a transformer which the function is to pick up the smallest sound that comes close to the amplifier
            The second block is comparator with hysterias. The function as analogue to digital convector and also it help to accumulate amparm sound like sound of the gun short or any other heavy sound  
            Block three. This is transistor switching this stage consist three bipolar function transistor (BJI) with a decay circuit found using capacitor time constant (T – RC) with a 12v Re let, it output work function is to switch the alarm circuit.
            Block four. This is the Alarm circuit, it’s function is the alarm tone. It is an stable mutivibertor that produce 1kH2 tone frequencies which sound as alarm signal with loud speaker which serves as an output transformer.
TABLE OF CONTENT
CHAPTER ONE
INTRODUCTION
1.1              General description of project
1.2              Design objectives
1.3              Significance of the project
1.4              The report layout
CHAPTER TWO
LITERATURE REVIEW
2.1              Historical background of the project
2.2              Theories and models relevant to the design
2.3              List and description of the system component
2.4              Distinction between the existing method of design and the new approach.
CHAPTER THREE
SYSTEM DESIGN
3.1              Description of the system building blocks
3.2              System design specification
3.3              Block diagram of the system
3.4              Description of the overall operation of the system
3.5              Component list
3.6              Complete circuit diagram of sound detector with alarm system.
CHAPTER FOUR
Implementation testing and results
CHAPTER FIVE
Cost analysis conclusion and recommendation
REFERENCE.
CHAPTER ONE
INTRODUCTION
1.1       THE GENERAL DESCRIPTION OF PROJECT
            Due to advance electron logy in the electronic which gave rise to automation of electronic system in domestic and industrial use. This development is what gave me the courage to choose a project topic on sound detector with alarm system. This system employ four discreet stages with power supply namely, the pick up microphone, Amplifier, Schmih trigger, thysistor switch circuit with rally circuit and 1kHz turn generator which from the alarm circuit at the input of the system a transducer which a capacitor microphone whose the function is to piece the sound and it out put to feed in to class. A amplifier microphone preamplifier of two transistor stage cable of amplifier the sound to a standard were it be accepted by the schmih trigger or built using comparator with hysterics. This comparator with hysterics is acting as amuroge to digital convector (AID) whose one put switching between high or low conditionally. An interface containing a transistor switching circuit with rally at it out put such that once a sound is pick up out the input the rally is energized capable of switching an alarm circuit on.
1.2              OBJECTIVE DESIGN
The main objective design of the project is to design and construct an electronically operated system capable of picking sound of a visitor at the door processing the alarm put natural sound wave to an out put electrical sound signal to alarm signal to alert the people inside the house  that some body is at the door outside, also it help increasing the standard exposure in the practical aspect of engineering training.
1.3       SIGNIFICANCE OF THE STUDY
            The project designed work on sound detector with alarm quite, applicable in almost every where like industries and for domestic use for instance it could serve as audio activated door bell for office installation also used to monitor an intruder in our domestic places.
1.4       THE REPORT LAYOUT
            For clarity and simplicity, the report is divided into five chapters. The chapter one deals on the introduction, which centers on general description of project, design objectives, significance of the project and the report layout. The next chapter which is chapter two is on the literature review which talks on the historical background of sound detector with alarm system theories and models relevant to the design, list and description of the system component and lastly distinction between the existing method of design and the new approach. Chapter three is on system design and which is all about the description of the system building blocks, system design specification, block diagram of the system, description of the overall operation of the system. Component list and complete circuit diagram of a sound detector with alarm system. Chapter four is on implementation, testing and results. Then chapter five is one cost analysis conclusion and recommendation.
            As maximum measure of comprehensibility was ensured throughout the report. This is indicated by the pattern of presentation and consistent system of rotation. This I believe will ensure maximum reader satisfaction.

DESIGN AND CONSTRUCTION OF SOUND DETECTOR WITH ALARM SYSTEM

Share This

Details

Type Project
Department Electrical Engineering
Project ID ELE0002
Price ₦3,000 ($20)
Chapters 5 Chapters
No of Pages 32 Pages
Methodology Scientific Method
Reference YES
Format Microsoft Word

500
Leave a comment...

    Details

    Type Project
    Department Electrical Engineering
    Project ID ELE0002
    Price ₦3,000 ($20)
    Chapters 5 Chapters
    No of Pages 32 Pages
    Methodology Scientific Method
    Reference YES
    Format Microsoft Word

    Related Works

    ABSTRACT This project work deals on the Design and Construction of Intruder Detector Alarm System with Direction/Location Displaywhich is capable of detecting intrusion at any location, sound and alarm and display the exact location of the intruder using... Continue Reading
    CHAPTER ONE INTRODUCTION 1.1.          Background of the Study The industrial Electronics has changed the whole field of Engineering and technology is occurring so rapidly, even in developing countries. It is so because newer technologies overcome older ones. After the industrial revolution the world shifted towards the information... Continue Reading
            TABLE OF CONTENT Title page Approval page Dedication Acknowledgement CHAPTER ONE – INTRODUCTION Background of problem Structure of the problem Objective of the study Scope and limitation Importance of the study Definition of terms Design of the system Layout for... Continue Reading
    CHAPTER ONE 1.0             INTRODUCTION 1.1     BACKGROUND OF PROBLEM           Fire detection system are safety system. They monitor rooms and buildings continuously for indication of fire outbreak and give alarm directly if one occurs.           Both the British Factory Acts 1961 and the officers shops and... Continue Reading
    ABSTRACT This project report is a thesis written specifically to cover the design analysis construction, test and packaging of a multipurpose security system from electric component that can be easily be obtainable from the market. The report discusses the various unit and stages of the alarm system, thesis include:- a)     Clock generation... Continue Reading
    A BSTRACT The project work titled Design and construction of a metal detector. When fully design and implemented would be able to detect any metallic material that is passing or coming close. This function would serve as a security check for dangerous metallic material as an alarm. Going by the sophisticated means of armed rubbers adopt these days... Continue Reading
    ABSTRACT An alcohol detector: - is a electronic device that detect alcohol in the breath of a person that has consumed the liquire. In this project, the design involved the hardware module and software module. The hardware module consist of sensor circuit (MQ – 3), the pic (Microcontroller circuit), the L.C.D. Circuit and the alarm circuit. The... Continue Reading
    ABSTRACT This project deals on the design and construction of an intruder detector for home and office use. Security as one of the biggest issues in our world today and we need a system that will be able to monitor our home, offices and industries by using two sensing... Continue Reading
    ABSTRACT  This project the design an construction of fire alarm was carried out with deep intensive and extensive research work my aim and objective in the price of work is to produce a standard device or electronics that will inform the security about a fire outbreak in the company or house for a quick reaction/action. In this project I shade... Continue Reading
    Abstract The project DESIGN AND CONSTRUCTION OF A 20-METRE DISTANCE REMOTELY CONTROLLED METAL DETECTOR is used for detecting metallic objects such as phones, bombs, and other metallic objects that are hidden from view. The design is based on the principle of the Resonant Frequency Oscillator (RFO) metal detectors in which oscillation is a function... Continue Reading
    Call Us
    Get this work
    whatsappWhatsApp Us