+234 813 0686 500
+234 809 3423 853
info@grossarchive.com

CONSTRUCTION OF A BLENDER

  • Type:Project
  • Pages:58
  • Format:Microsoft Word
(Electrical Engineering Project Topics & Materials)

ABSTRACT
Blender is an electric machine for size reducing soft food or liquid mixture.  Blender is some time called liquidizer consists of a glass jar or jug containing a steel blade assembly at the base driven by a small electric motor.
Construction of blender was done based on the principle of size of reduction using electric motor as the major driver force.  During the construction of blender, we adopted different stages which includes:
i.    The production of preliminary drawings with details and dimensioned sketches.
ii.    Choosing of design and materials used in the construction.
iii.    Construction and fabrication of all the component of the blender which includes blender container, shires, blade and the motor, all these was coupled together.
iv.    Examination and testing of the performance and efficiency of the machine.
After strictly adopting the aforementioned stages, a well structured blender made of steel (stainless & mild) was obtained as the end product.  Also, for effectiveness of the size reducing action, the steel blade was sharpened and also the number of the blade was increased.  Actually, the material selected for this project has reduced the cost of painting and it is found to be anti corrosion due to the high degree of chromium contents and other alloy.
The main object of this project which is to be able to fabricate the component using the primary tool in the mechanical workshop was achieved after all the difficulties uncounted during the construction of blender.
The project construction of blender in relation to materials for construction costed N22,000.  Comparing this with the price of normal domestic blender, can be seen to be extremely high.  This high is due to the material of construction and fabrication processes.
In considering all the resources channeled towards the construction, it can be rightly stated that the machine is economical in relation to materials used in the construction and the performance of the machine after construction.
 
TABLE OF CONTENTS

Title page
Letter of transmittal
Approval page
Dedication
Acknowledgement
Abstract
Table of content

CHAPTER OF ONE:    INTRODUCTION

CHAPTER TWO:    LITERATURE REVIEW
2.1    Origin of blender as a size reduction equipment
2.2    Mechanisms of size reduction
2.3    Energy for size reduction
2.3.1    Energy utilization
2.4    Behaviour of material in size reduction process
2.5    Size reduction equipment
2.6    Modes of operation
2.7    Nature of the material to be crushed
2.8    Importance of size reduction
2.9    Reasons for selection of stainless steel
2.10    Maintenance of blender and use
2.11    Material selection for construction
2.12    Commonly used materials of construction

CHAPTER THREE:    CONSTRUCTIONAL PROCEDURE

CHAPTER FOUR:    DISCUSSION

CHAPTER FIVE:    CONCLUSION/RECOMMENDATION

CHAPTER SIX:        REFERENCES
 

CONSTRUCTION OF A BLENDER

Share This

Details

Type Project
Department Electrical Engineering
Project ID ELE0183
Price ₦3,000 ($9)
No of Pages 58 Pages
Format Microsoft Word

500
Leave a comment...

    Details

    Type Project
    Department Electrical Engineering
    Project ID ELE0183
    Price ₦3,000 ($9)
    No of Pages 58 Pages
    Format Microsoft Word

    Related Works

    ABSTRACT Blender is an electric machine for size reducing soft food or liquid mixture. Blender is some time called liquidizer consists of a glass jar or jug containing a steel blade assembly at the base driven by a small electric motor. Construction of blender was done based on the principle of size of reduction using... Continue Reading
    ABSTRACT  Maintaining steady cost projection on construction projects had been until recently an issue of serious concern, both to the client and project contractors. Cost deviation from initial Cost plan, had been prevalent on Construction sites. However, little or no efforts has made to curtail the phenomenon, it is against this background that... Continue Reading
    ABSTRACT The role of internal auditors in construction companies cannot be overemphasized. This research work is aimed at assessing the role of internal auditors in a construction companies in Kaduna State. The sample size is Nalado Construction Company, Kaduna. Both primary and secondary methods were used to collect data, for the primary sources,... Continue Reading
    ABSTRACT This research work tends to explain the prospects of human resource management in enhancing higher productivity and also explain the human resource objective policies and importance of human resource management as in whole of adequate utilization of people or staff in organization towards enhancing higher productivity, while on the other... Continue Reading
    ABSTRACT This study was aimed primarily at highlighting the techniques, policies and concept of auditing as they relate to growth of Business Corporation. The principal focus was on the private sector which more than any other sector... Continue Reading
    ABSTRACT Wheelbarrow can be defined as a machine that is used by labourers, farmes, gardeness, and others for transporting loads to heavy by hand it from one place to another. However, materials used for construction purpose are bought in standard sizes wither in long bars or standard sheet sizes.  Moreover, depending on the type to be... Continue Reading
    ABSTRACT This project work is on the construction of an F.M transmitter this system consists of four discrete modules namely the audio frequency (AF) amplifier (class A) the modulator the master oscillator and the radio frequency (RF) amplifier (ClassC) these formed the conventional events for building FM transmitter here the signal (from the... Continue Reading
    ABSTRACT Wheelbarrow can be defined as a machine that is used by labourers, farmes, gardeness, and others for transporting loads to heavy by hand it from one place to another. However, materials used for construction purpose are bought in standard sizes wither in long bars or standard sheet sizes. Moreover, depending on... Continue Reading
    ABSTRACT The project was on the construction of a venturimeter. Venturimeter being a measuring instruction was used in determining the flow rate of fluid down a pipe or the rate of discharge in a pipeline and is often fixed permanently at different sections of the piple line to know the discharge there. The research... Continue Reading
    ABSTRACT This project work is on the construction of an F.M transmitter this system consists of four discrete modules namely the audio frequency (AF) amplifier (class A) the modulator the master oscillator and the radio frequency (RF) amplifier (ClassC) these formed the conventional events for building FM transmitter here the signal (from the... Continue Reading