+234 813 0686 500
+234 809 3423 853
info@grossarchive.com

DESIGN AND CONSTRUCTION OF A SOLAR POWERED MULTIPLE CELL PHONES CHARGING BOOTH

  • Type:Project
  • Chapters:6
  • Pages:51
  • Methodology:Nil
  • Reference:YES
  • Format:Microsoft Word
(Electrical Engineering Project Topics & Materials)

ABSTRACT

Cell phones need electric sources to charge their batteries in order to work, but there are people in developing and third world countries that find it hard to access electric sources.In an attempt to provide an alternative means of charging to those unfortunate areas in third world and developing countries, a solar powered cell phone charging booth is to be designed and constructed in this project.

The goal of this project is to create a multiple output solar cell phone chargers for Local areas that found it difficult to charge their phones. The charger takes an input of 12 volts from solar panel and reduces the voltage level to 5 volts output used to charge cell phones.

The design, construction and testing of the solar charger has been achieved and found to work satisfactorily. A cell phone charged at a rate similar to a conventional phone charger and the operation offers a reliable protection for cell phone batteries under charging.

CHAPTER1: INTRODUCTION

1.1 Introduction- - - - - - - - - - 1

1.2 Aim and Objectives- - - - - - - - - 3

1.3 Scope of the Project- - - - - - - - - 3

1.4 Problem Statement- - - - - - - - - 4

1.5 Justification of the Project- - - - - - - - 4

1.6 Thesis Outline-- - - - - - - - - 5


CHAPTER 2: LITERATURE REVIEW 

2.1 Introduction- - - - - - - - - - 7

2.2 Hardware Components- - - - - - - - 82.

2.1 Solar Panel- - - - - - - - - - 82

.2.2 Solar Charger- - - - - - - - - 92.

2.3 USB Port- - - - - - - - - - 102.

2.4 Cell Phone Battery-- - - - - - - - 12

2.3 Components Description- - - - - - - - 13


CHAPTER 3: MATERIALS AND METHODS

3.1Design Requirements-- - - - - - - 19

3.2 Circuit Diagram for the Solar Charger- - - - - - 20

3.3Circuit Analysis- - - - - - - - - 21

3.4List of Components- - - - - - - - - 26


CHAPTER FOURDESIGN ANALYSIS AND CONSTRUCTION


CHAPTER FIVEPROJECT CONSTRUCTION PROCESS AND TESTING

LIST OF FIGURES

Figure                                                                                                     PageFigure 

2.1: USB Connectors- - - - - - - - 

Figure 2.2: Resistors Configurations for USB Pins- - - - -14

Figure 2.3: TL431 Pin Configuration- - - - - - -15Figure 2.4: 7805 Pin out- - - - - - - - 16Figure 2.5:  Voltage Regulator Block Diagram- - - - - 17Figure 2.6: Pin out of LM358- - - - - - - - 18Figure 3.1: The Proposed Circuit Design for Solar Charger- - - 20Figure 3.4: LM358 Connection- - - - - - - 24Figure 4.1: Image of the Circuit on Project Board without battery- - 28Figure 4.2: Image of Circuit on Project Board with Battery- - - 28Figure 4.3: Image of Solar Charger Circuit-- - - - - 29Figure 4.4: Image of Multi-meter used- - - - - 29

Figure 4.5: Solar Charger Circuit Output- - - - - - 30Figure 4.6: Complete Circuit of the Solar Charger- - - - 30Figure 4.7: Image of Soldering iron used- - - - - - 31Figure 4.8: Solar Panel construction casing- - - - - 32Figure 4.9: Front and Back views of the Circuit Construction Casing - 33Figure 4.10: Snap shot of the complete Device with Cell phones connected-- - - - - - - - - - - 33

DESIGN AND CONSTRUCTION OF A SOLAR POWERED MULTIPLE CELL PHONES CHARGING BOOTH

Share This

Details

Type Project
Department Electrical Engineering
Project ID ELE0169
Price ₦3,000 ($9)
Chapters 6 Chapters
No of Pages 51 Pages
Methodology Nil
Reference YES
Format Microsoft Word

500
Leave a comment...

    Details

    Type Project
    Department Electrical Engineering
    Project ID ELE0169
    Price ₦3,000 ($9)
    Chapters 6 Chapters
    No of Pages 51 Pages
    Methodology Nil
    Reference YES
    Format Microsoft Word

    Related Works

    Abstract In this project we designed a solar powered computer control system  for electrical machines and spark ignition engines. It is made up of a  hardware device that comprises of various electrical components  which are powered by a 25W solar panel. The power cord of the  machines are modified and connected to the hardware and the ... Continue Reading
    CHAPTER ONE INTRODUCTION 1.1 Background Information Electricity is a general term comprising of a variety of phenomena resulting from the presence and flow of electric charge. These include many phenomena, such as lightning,... Continue Reading
      ABSTRACT         This project work describes the construction and designing of 12volt car battery charger with USB port for charging mobile phones. The charging process is focus more on 12volt lead car batteries commonly used in vehicles. This design was done by using I.C LM7812 and LM7806 with transformer of 230 volt and series of other... Continue Reading
    Abstract This project work centered on construction of 12V/10A solar charge controller that is needed in photovoltaic system to safely charge regulate and discharge of sealed lead acid battery through DC load. Solar charge controller is devices that regulate solar photovoltaic power and prevent overcharging, over discharging or overflow of current... Continue Reading
    ABSTRACT This project is he design and construction of a voltage inverter system with trickle charging system. This device is design to provide power supply for the need of offices, household etc. In absence of NEPA power supply. It would also prevent harm to our appliances caused by power holding company LTD (NEPA) Random power outage . TABLE OF... Continue Reading
    ABSTRACT This project is he design and construction of a voltage inverter system with trickle charging system. This device is design to provide power supply for the need of offices, household etc. In absence of NEPA power supply. It would also prevent harm to our appliances caused by power holding company LTD (NEPA) Random power outage . TABLE OF... Continue Reading
    TABLE OF CONTENTS TITLE PAGE .. ii DEDICATION .. iv ACKNOWLEDGEMENTS . v TABLE OF CONTENTS . vi LIST OF FIGURES . viii ABSTRACT . ………ix CHAPTER ONE .. 1 INTRODUCTION .. 1 1.1              Background to the Study . 1 1.2        The Sun and the nature of light Energy . 3 1.3        Solar lamp . 4 1.4        Solar... Continue Reading
    CHAPTER ONE INTRODUCTION 1.1       Preamble A power inverter, or inverter, is an electronic device or circuitry that changes direct current (DC) to alternating current (AC). ( The Authoritative, 2000 ). The input voltage, output voltage and frequency, and overall power handling depend on the design of the specific device or circuitry. The... Continue Reading
    ABSTRACT In this project work, we are mostly concern about building a simple power streetlight which is automatically operated. There are four main components required to build a solar operated streetlight. The solar array, High efficiency D.C lamp section made by transistor, resistors, and the sensor LDR, changes controller which is made up of... Continue Reading
    Abstract A solar ovenis a device that converts solar energy into useful heat in a confined space (oven chamber) which can be utilised for cooking and baking purposes.The oven consists of plane reflectors to concentrate the solar radiation on the collector.The heat gain is maximum if the collector and reflectors are continuously adjusted such... Continue Reading