+234 813 0686 500
+234 809 3423 853
info@grossarchive.com

DESIGN AND CONSTRUCTION OF AN AUDIO AMPLIFIER

  • Type:Project
  • Pages:34
  • Format:Microsoft Word
(Electrical Engineering Project Topics & Materials)
Amplifiers, which are devices that increase the gain of an audio signal, dominate modern audio technologies. In this project, we designed and built an audio amplifier from scratch in order to demonstrate that such a key device can be constructed using basic electrical engineering principles.

After performing major circuit calculations by hand, we modeled our circuit in PSpice, which is computer software that analyzes electrical circuits. In particular, we studied the variance that using budget electrical components introduced into the circuit overall by comparing three different amplifiers that we constructed.

We found the variance between the three amplifiers to be minimal, confirming our method of building a low budget, low power audio amplifier.

INTRODUCTION
Many centuries back people found it difficult to be heard over a few metres away from them while addressing their audience. This motivated the need for man to pursue new technologies which will increase his reliability and efficiency. Man in search of the audio boosting instrument developed an aspect of communication called “Public Address System (PAS)”, which helps an individual to address or communicate to a large group of people. Through this system for instance, a clergyman can address his congregation, an entertainer can communicate to his audience, a politician can address his supporters and so on.
The Public Address System (PAS) comprises of a microphone which converts sound energy to electrical energy, an amplifier which increases the strength of the electrical signals and a loudspeaker which reconverts the electrical energy of the signals to sound energy.

In the PAS, the sound energy at the loudspeaker has greater power than that at the microphone hence, the sound is more louder. This reduces the stress of the individual using the microphone from shouting. The power output of the speaker depends on the power rating of the loudspeaker and that of the amplifier.

Moreover, an amplifier may be defined as a system or an electronic circuit which accepts signals at its input and gives out signals at its output grater than the signal at its input in amplitude or power or current. The output signal is similar to the input signal in shape, form and frequency



TABLE OF CONTENT
Title page certification
Certification
Acknowledgement
Abstract
Table of content
CHAPTER ONE:
Introduction
Objective of study
Scope of Study
Background of Study
Definition of terms

CHAPTER TWO:
Background
Circuit Components
Classes of Amplifiers
Negative Feedback

CHAPTER THREE: Methodology
Design Requirements

CHAPTER FOUR:
Theoretical Design
The First Stage
The Second Stage
The Output Stage
Computer Simulation
Lab Work
Final Assembly

CHAPTER FIVE: 
Results

CHAPTER SIX:
Conclusion 
References

DESIGN AND CONSTRUCTION OF AN AUDIO AMPLIFIER

Share This

Details

Type Project
Department Electrical Engineering
Project ID ELE0152
Price ₦3,000 ($9)
No of Pages 34 Pages
Format Microsoft Word

500
Leave a comment...

    Details

    Type Project
    Department Electrical Engineering
    Project ID ELE0152
    Price ₦3,000 ($9)
    No of Pages 34 Pages
    Format Microsoft Word

    Related Works

    ABSTRACT An audio AMP is basically a system which is used as a means of increasing the level of sound or audio signals for maximum use. A public address system consists basically of microphone, Amplifier and speaker(s) to facilitate the communication to intelligible speech to groups of people... Continue Reading
    . ABSTRACT This work deals extensively with the design and construction of an electronic dice display (EOD) with audio unit. The device displays the of a hudo dice in numberical form and also produces sound as it displays the number. The device works with principle of chance... Continue Reading
    ABSTRACT This work deals extensively with the design and construction of an electronic dice display (EOD) with audio unit. The device displays the of a hudo dice in numberical form and also produces sound as it displays the number. The device works with principle of chance... Continue Reading
    ABSTRACT This work deals extensively with the design and construction of an electrodice display (EOD) with audio unit. The device displays the value of a ludo dice in numerical form and also produces sound as it displays the number. The device works with principle of chance... Continue Reading
    This work deals extensively with the design and construction of an electrodice display (EOD) with audio unit. The device displays the value of a ludo dice in numerical form and also produces sound as it displays the number. The device works with principle of chance employed by ludo game players. The output of the display is usually very rapid that... Continue Reading
    PREFACE The aim of this project is to construct power amplifier. The system is expected to amplify. The major components in the circuit is the integrated circuit (IC JRE with some circuit elements for the normal operation of the circuit. So as to amplifier an output, the general construction dealt with in the chapters. The levels of treatments... Continue Reading
    THE DESIGN AND CONSTRUCTION OF MINI RADIO BROADCAST TRANSMITTERAND AUDIO CONSOLE USING FREQUENCYMODULATION (FM) WITH POWER RATING OF 1 WATT ABSTRACT The early transmitter for radio broadcasting is so big and bulky that they do occupy numerous spaces. The circuitries are mainly designed with valves, which are big in sizes. With the advent of... Continue Reading
    ABSTRACT The design of this 30 volt Audio Amplifier with volume, table and bass control which was done wit ht he combination of five (5) different circuit which are interconnected during or after construction. This amplifier operates with an option of a left and right channel. The combination of these circuit include this main amplifier circuit... Continue Reading
    ABSTRACT The aim of this project work is to create an alternative sound amplifying circuit that will enable the enhancement of electronic production. This portable RC coupled amplifier constructed with very cheap and locally sourced materials found reliable and effective in function. Thus the... Continue Reading
    ABSTRACT The aim of this project work is to create an alternative sound amplifying circuit that will enable the enhancement of electronic production. This portable RC coupled amplifier constructed with very cheap and locally sourced materials found reliable and effective in function. Thus the... Continue Reading