+234 813 0686 500
+234 809 3423 853
info@grossarchive.com
+234 813 0686 500
info@grossarchive.com

Project Topic: DESIGN AND FABRICATION OF A DUST EXTRACTOR

  • Type: Project
  • Department: Mechanical Engineering
  • Project ID: MCE0117
  • Price: ₦3,000 ($20)
  • Pages: 39 Pages
  • Format: Microsoft Word
  • Views: 680

For more Info, call us on
+234 8130 686 500
or
+234 8093 423 853
ABSTRACT
Man’s impact on global environment system especially in the area of dust extraction is now at a scale where it is disrupting.  These dust extractors varies in major ways.
The environmental degradation is, in turn contributing to health threat in this part of the globe.  Unfortunately most factories, workshops which suppose to posses these machines for dust extractions a re not having them thereby making dust a very dangerous threat to man.  
Due to this ugly development it, is obvious that these factories and workshops can do little or nothing to protect our environment from this poor state.  It is therefore necessary that all and sundry should join the crusade of eradicating dust from our environment thereby making it clean.  Although before now people have tried to contribute their own quota in seeing to the end of the menace, get lack of interest, finance has posed a hindrance to the realization of this achievement.
In view of the above, we deemed it necessary that such a machine should be constructed to the Mechanical Engineering workshop to eradicate dust and thereby make the workshop environment clean and fit for students practical activities. 
 The realization of this work started from our supervisor who conceived the idea which we saw as a need, then we defined the need and synthesized it, evaluate and came to a conclusion.
The synthesis led us to drawing board by sketching and drawing to scale after which the design required was chosen.  Fabricated and parts put together to form what we called a dust extractor.


TABLE OF CONTENTS

Title page
Approval page
Letter of transmittal
Signature page
Letter of release
Dedication
Acknowledgement
Abstract
Table of contents

CHAPTER ONE
1.0 Introduction 
1.1 Aims and objectives
1.2 Economic importance of a dust extractor
1.3 Uses of extractors (dust)
1.4 Design consideration

CHAPTER TWO
2.0 Literature review
2.1 Improvement in previous ones

CHAPTER THREE
3.0 Design calculation
3.1 Material selection
3.2 Sequence of operation

CHAPTER FOUR
4.0 Cost analysis
4.1 Material cost
4.2 Labour cost
4.3 Cost of reporting
4.4 Market survey and value

CHAPTER FIVE
5.0 Performance evaluation
5.1 Recommendation and conclusion 
References
DESIGN AND FABRICATION OF A DUST EXTRACTOR
For more Info, call us on
+234 8130 686 500
or
+234 8093 423 853

Share This
  • Type: Project
  • Department: Mechanical Engineering
  • Project ID: MCE0117
  • Price: ₦3,000 ($20)
  • Pages: 39 Pages
  • Format: Microsoft Word
  • Views: 680
Payment Instruction
Bank payment for Nigerians, Make a payment of ₦ 3,000 to

Bank GTBANK
gtbank
Account Name Obiaks Business Venture
Account Number 0211074565

Bitcoin: Make a payment of 0.0003 to

Bitcoin(Btc)

btc wallet
Copy to clipboard Copy text

500
Leave a comment...

    Details

    Type Project
    Department Mechanical Engineering
    Project ID MCE0117
    Price ₦3,000 ($20)
    No of Pages 39 Pages
    Format Microsoft Word

    Related Works

    ABSTRACT Man’s imp act on global environment system especially in the area of dust extraction is now at a scale where it is disrupting.  These dust extractors varies in major ways. The environmental degration is, in turn contributing to health threat in this part of the globe.  Unfortunately most factories, workshops which suppose to posses... Continue Reading
    ABSTRACT Man’s imp act on global environment system especially in the area of dust extraction is now at a scale where it is disrupting. These dust extractors varies in major ways.The environmental degration is, in turn contributing to health threat in this part of the globe. Unfortunately most... Continue Reading
    ABSTRACT Knowledge could only be obtained successfully by the use of book for research but unfortunately because of hard times, books have become very expensive.  This is called for presentation of books already purchased whether in the library or on the household so that it can be used by the future generation.  There could only be done by... Continue Reading
    ABSTRACT In recent times, most of the household appliances are using electric power and as such, electricity shortage has become a major problem throughout the world. Ceiling fan is one of such appliances that consume electric power. The best way to minimize the power consumption of the ceiling fan is to reduce the weight of the ceiling fan blade.... Continue Reading
    ABSTRACT Children swing plays a unique role in the live and upbringing of a child. It makes children to avoid dangerous games thereby providing them on opportunity for proper relaxation. The children swing consists of a cost iron metal that is welded with a chain and set that makes children move to and fro... Continue Reading
    ABSTRACT Nowadays, the destruction and pollution of humane environment has produced an ever growing awareness worldwide of the need for more effective sedimentation processes. The main aim of this project was to design and fabricate an experimental sedimentation rig with the objective to determine the rate of settling against time using calcium... Continue Reading
    ABSTRACT: The designed air driven engine is an economic friendly engine which operates with the aid of a compressed air. in principle, an air driven engine uses the expansion of compressed air to drive the pistons of an engine. an air driven engine is a pneumatic actuator that creates useful work by expanding compressed air. there is no mixing of... Continue Reading
    ABSTRACT The designed Air Driven Engine is an economic friendly engine which operates with the aid of a compressed air. In principle, an Air Driven Engine uses the expansion of compressed air to drive the pistons of an engine. An Air Driven Engine is a pneumatic actuator that creates useful work by expanding compressed air. There is no mixing of... Continue Reading
    ABSTRACT A prototype of hydraulically operated coconut oil extractor was designed and fabricated. The machine can be used for other oil-bearing seeds such as groundnut and palm kernel. The machine is made up of a plunger, ram disc, expression chamber, and electric heater. The extractor can process 10kg coconut per hour. An efficiency of 15% was... Continue Reading
    ABSTRACT. A machine for corn Sheller is highly and greatly needed for consistence of usage of corn in local and international levels. With regards to this indispensable need, a corn-shelling machine is designed which operates to remove the corn grains and leaving the cobs intact. In attainment to this design objective and aims, a proper... Continue Reading
    Call Us
    Get this work
    whatsappWhatsApp Us