DESIGN AND CONSTRUCTION OF A 2000W INVERTER

  • Type: Project
  • Department: Mechanical Engineering
  • Project ID: MCE0110
  • Access Fee: ₦5,000 ($14)
  • Pages: 72 Pages
  • Format: Microsoft Word
  • Views: 857
  • Report This work

For more Info, call us on
+234 8130 686 500
or
+234 8093 423 853
ABSTRACT

A 1.25KVA (2000W) inverter generator was designed, constructed and certified Ok.
In this project, the design of the inverter generator  is aimed at satisfying the need of converting, a D.C source of supply (12v battery) to an A.C voltage of 220v.
The inverter range of output is between 200-220v.
Since the inverter was designed to step-up voltage, the power transformer is being used as step-down transformer for charging and as step-up transformer for inverting.
The control circuit ensures appropriate switching of the input voltage from mains supply to the taping of the transformer for charging.

TABLE OF CONTENT
TITLE PAGE
CERTIFICATION PAGE
DEDICATION
ACKNOLWLEDGEMENT
ABSTRACT
TABLE OF CONTENT

CHAPTER ONE
1.0    Introduction
1.1    Analysis/ Review Of Existing System
1.2    Aims And Objectives
1.3    Scope/Limit Of The Project
1.4    Application

CHAPTER TWO
2.0      Literature Review
2.1      Brief Review of Principle behind This Project
2.2.1   Capacitor
2.2.2   Resistor
2.2.3   Relay
2.2.4   Transistor
2.2.5   Diode
2.2.6   Switch
2.2.7   Operational Amplifiers (Op-Amp)
2.2.9   Transformer
2.2.10 A.C Voltage Meter
2.2.11 CD 4047 (MULTIVIBRATOR)
2.2.12 MOSFET

CHAPTER THREE
3.0     Mode of Operation and Basic Components Used
3.1     Methodology
3.1.2   Input stage
3.1.2   Regulation
3.1.3   Control Logic
3.1.4   Oscillator
3.1.5   Phase Splitter
3.1.6   Driver Section
3.1.7   Step-Up Transformer
3.1.8   Output Section
3.2      Methodology 2
3.2.1    Input stage
3.2.2     Isolating relay
3.2.3     Step down Transformer
3.2.3      Rectifier Circuit Via MOSFET
3.2Theory and Calculation of Transformer
3.4Core Dimension

CHAPTER FOUR
4.0      Construction Testing and result
4.1      Problems Encountered

CHAPTER FIVE
5.0     Conclusion
5.1     Recommendation
         Reference

DESIGN AND CONSTRUCTION OF A 2000W INVERTER
For more Info, call us on
+234 8130 686 500
or
+234 8093 423 853

Share This
  • Type: Project
  • Department: Mechanical Engineering
  • Project ID: MCE0110
  • Access Fee: ₦5,000 ($14)
  • Pages: 72 Pages
  • Format: Microsoft Word
  • Views: 857
Payment Instruction
Bank payment for Nigerians, Make a payment of ₦ 5,000 to

Bank GTBANK
gtbank
Account Name Obiaks Business Venture
Account Number 0211074565

Bitcoin: Make a payment of 0.0005 to

Bitcoin(Btc)

btc wallet
Copy to clipboard Copy text

500
Leave a comment...

    Details

    Type Project
    Department Mechanical Engineering
    Project ID MCE0110
    Fee ₦5,000 ($14)
    No of Pages 72 Pages
    Format Microsoft Word

    Related Works

    CHAPTER ONE INTRODUCTION All modern engineering system includes certain aspects of control system at some point in their broadcast scenes, control engineering and the associated theory are concerned with the means of making system to behave in a desired may.  The system on this thesis is a DC ' AC... Continue Reading
    TABLE OF CONTENTS Title Page Certification Page Acknowledgements Dedication  CHAPTER ONE:INTRODUCTION  1.1Definition of Term  CHAPTER TWO:TRANSFORMER FUNDAMENTALS   CHAPTER THREE:DESCRIPTION OF COMPONENTS  3.1Resistors  3.2Capacitors 3.2.1Types of Capacitor 3.3Semi-Conductor Diode  3.4Transistors  3.4.1Bipolar Transistor  3.5Field Effect... Continue Reading
    ABSTRACT An inverter is an electronic device that converts direct current (DC­) to alternating current (AC) the converted Ac can be at any required voltage and frequency with the use of appropriate transformers, switching and control circuit. It’s simple put, is an electronic box that makes household electricity for everyday items.  It... Continue Reading
    TABLE OF CONTENTS Title Page Certification Page Acknowledgements Dedication CHAPTER ONE:INTRODUCTION 1.1Definition of Term CHAPTER TWO:TRANSFORMER FUNDAMENTALS CHAPTER THREE:DESCRIPTION OF COMPONENTS 3.1Resistors 3.2Capacitors 3.2.1Types of Capacitor 3.3Semi-Conductor Diode 3.4Transistors 3.4.1Bipolar Transistor 3.5Field Effect Transistor (FET)... Continue Reading
    ABSTRACT An inverter is an electronic device that converts direct current (DC¬) to alternating current (AC) the converted Ac can be at any required voltage and frequency with the use of appropriate transformers, switching and control circuit. It’s simple put, is an electronic box that makes household... Continue Reading
    ABSTRACT This inverter is designed to convert ac power from higher capacity dc batteries to A.C voltage (power) for systems that use ac only. It uses 24v battery D.C times 2, which is converted by the MOSFET to A.C. it is used I.C. with the model number SG3525 where the four MOSFET is connected to it. It consists winding which enable to determine... Continue Reading
    ABSTRACT This project is titled the design and construction of a DC to AC inverter system. It is designed to meet up with the power demand in the offices and in homes in the absence of power supply from the national supply authority, NEPA. In order words the device / item serves as a substitute for NEPA which almost monopolises the power supply to... Continue Reading
    ABSTRACT This project presents the design and construction of a DC to AC inverter system. It is designed to meet up with the power demand in the offices/homes in the absence of power supply from National Supply Authority.  It is designed in such a way that it will take up to 12V DC from battery and inverts it to an output of 220V, 50Hz AC. It... Continue Reading
    ABSTRACT Power inverter is an electrical appliance that can be used with DC battery as an alternativesource of energy supply in the event of power failures and energy crisis. It is cheap, clean,very conducive and silent when in operation and a very reliable source of power supply as togenerator. Modern research and technologies have shown that... Continue Reading
    ABSTRACT This project is titled the design and construction of a DC to AC inverter system. It is designed to meet up with the power demand in the offices and in homes in the absence of power supply from the national supply authority, NEPA. In order words the device / item serves as a substitute for NEPA which almost monopolises the power supply to... Continue Reading
    Call Us
    Get this work
    whatsappWhatsApp Us