+234 813 0686 500
+234 809 3423 853
info@grossarchive.com

CONSTRUCTION OF LIGHT SENSITIVE ALARM SYSTEM

  • Type:Project
  • Chapters:5
  • Pages:34
  • Format:Microsoft Word
(Engineering Project Topics & Materials)

CHAPTER ONE

1.1             INTRODUCTION

The light sensitive alarm is an electronic circuit that detects a sudden shadow falling on the light sensor and sounds the bleeper. When this happens, the circuit will respond to gradual charges in brightness to avoid false alarm. The beeper sounds for only a short time to prevent the battery from running flat. Normal light can be use. The circuit will work best if a beam of light is made to fall on the light sensor. Breaking this beam will then cause the bleeper to sound. The light sensor is a light dependent resistor (LDR); this has a low resistance in bright light and a high resistance in dim light. The light sensitivity of the circuit can be adjusted by varying the 100kiloohms (K) preset. The length of bleep can be varied from 0.5 to 10 seconds using 1 milliohm (M) preset. using the 7555 low power timer ensures that the circuit draws very little current of about 0.5 milli-Amps except for the short time when the bleeper is sounding, this uses 7 milli-Amps. If the circuit is switch on continuously, an alkaline 9V battery should last for about a month.

1.2             AIMS AND OBJECTIVES

The project is actually designed to promote high level of security in workshops, industries and home. It enhances a recorded indication of visitors and to summon staff or personnel to fulfill a service as in domestic and industrial use.

1.3             PURPOSE OF THE STUDY

The purpose of this study is to provide maximum security round the world.

1.4             SCOPE OF THE STUDY

This project “light sensitive alarm” is design mainly to alert the user by a bleeper when the circuit detects a sudden shadow falling on the light sensor the bleeper duration can be controlled by varying the I ohms – preset resistor.

1.5             LIMITATION OF THE STUDY

The limitations of this study are: the bleeper sound for only a short time to prevent the battery from running flat. If there is any little mistake during soldering, there will not work well. Also by met being able to purchase some components and their exact value couple with transportation problems has also gone a long way to reduce the efficiency of this project.

1.6             SIGNIFICANCE OF THE PROJECT

This project helps to provide security in offices, hotels, homes etc. it also promotes and encourage researches involving in security research projects.

CONSTRUCTION OF LIGHT SENSITIVE ALARM SYSTEM
Share This

Details

Type Project
Department Engineering
Project ID EGR0008
Price ₦3,000 ($9)
Chapters 5 Chapters
No of Pages 34 Pages
Format Microsoft Word

500
Leave a comment...

    Details

    Type Project
    Department Engineering
    Project ID EGR0008
    Price ₦3,000 ($9)
    Chapters 5 Chapters
    No of Pages 34 Pages
    Format Microsoft Word

    Related Works

    CHAPTER ONE 1.1             INTRODUCTION The light sensitive alarm is an electronic circuit that detects a sudden shadow falling on the light sensor and sounds the bleeper. When this happens, the circuit will respond to gradual charges in brightness to avoid false alarm. The beeper sounds for only a short time to prevent the battery... Continue Reading
    CHAPTER ONE 1.0.   INTRODUCTION 1.1.   GENERAL DESCRIPTION OF THE PROJECT Industrial electronics has turned the whole world into a global village. One of the most indispensable aspects of these phenomena is automation, which forms the nucleus of the present day electronics technology. Considering the milestone, it was desired to make the... Continue Reading
    ABSTRACT The intruder alarm system was designed and build in order to let the industrial and commercial company know how important alarm system is all  about. These can be of Good help if the intruder will look through this project and support for the development of this project as to let the Federal Government know that the young engineering of... Continue Reading
    ABSTRACT The term “critical point” is sometimes used to denote specifically the vapour-liquid critical point of a material. The vapour-liquid   point denotes the condition above which distinct liquid and gas phases so not exist. The project, the construction of critical temperature measuring instrument is aimed at measuring the critical... Continue Reading
    ABSTRACT             This project is design and construction of a sound detector with alarm system was done primarily to detector sound. It can be use in industrial and domestics. It employ four discreet stages with power supply which power the system.             The 1st block is pick up amplifier containing the microphone... Continue Reading
    ABSTRACT This project is design and construction of a sound detector with alarm system was done primarily to detector sound. It can be use in industrial and domestics. It employ four discreet stages with power supply which power the system. The 1st block is pick up amplifier containing... Continue Reading
            TABLE OF CONTENT Title page Approval page Dedication Acknowledgement CHAPTER ONE – INTRODUCTION Background of problem Structure of the problem Objective of the study Scope and limitation Importance of the study Definition of terms Design of the system Layout for... Continue Reading
    CHAPTER ONE 1.0             INTRODUCTION 1.1     BACKGROUND OF PROBLEM           Fire detection system are safety system. They monitor rooms and buildings continuously for indication of fire outbreak and give alarm directly if one occurs.           Both the British Factory Acts 1961 and the officers shops and... Continue Reading
    ABSTRACT This project report is a thesis written specifically to cover the design analysis construction, test and packaging of a multipurpose security system from electric component that can be easily be obtainable from the market. The report discusses the various unit and stages of the alarm system, thesis include:- a)     Clock generation... Continue Reading
    ABSTRACT This project work deals on the Design and Construction of Intruder Detector Alarm System with Direction/Location Displaywhich is capable of detecting intrusion at any location, sound and alarm and display the exact location of the intruder using... Continue Reading