+234 813 0686 500
+234 809 3423 853
info@grossarchive.com

CONSTRUCTION OF STEP UP TRANSFORMER WITH MULTI OUTPUT

  • Type:Project
  • Chapters:5
  • Format:Microsoft Word
(Engineering Project Topics & Materials)

ABSTRACT

Transformer is one of the indispensable devices mostly in Electric Power Transmission, Transformer Step-down or Step-up, the output voltage/current to the design requirement. This project was meant to show the necessary step and methods of designing and constructing a typical step-up auto transformer with tapping.

In this project, we gathered information from both primary data (personal interview) and secondary data (information from textbook and internet).  The project work consist of copper winding which was self-induced the wind has several tapping for secondary voltages. It also consists of Iron Core which was laminated, bolt and nut to hold the Iron Core tight.

In this design, am using 1KVA to be 5000w, for any current that come in like input to give 5000w output for a Air-conditioner to used. 

The winding determine wealthier step-up or step-down, in step-up is to increase voltage rating the primary turn were determine by measuring the length of the primary coil to the calculated length value then number of turns was 396 turns, which was rounded up to 400 turns for ease of calculation of the secondary number of turns, so secondary was calculating transformer ratio.

CONSTRUCTION OF STEP UP TRANSFORMER WITH MULTI OUTPUT

Share This

Details

Type Project
Department Engineering
Project ID EGR0007
Price ₦3,000 ($9)
Chapters 5 Chapters
Format Microsoft Word

500
Leave a comment...

    Details

    Type Project
    Department Engineering
    Project ID EGR0007
    Price ₦3,000 ($9)
    Chapters 5 Chapters
    Format Microsoft Word

    Related Works

    ABSTRACT This project write up of a step – down transformer from 220v to 24v:12v, this is to expose what a transformer is all about and its important and uses. The aim of the project, step-down transformer is to show Electrical and Electronics Engineering, could step-down the voltage from 220v to 24:12v, and fro this project write up. They... Continue Reading
    ABSTRACT This is a technical project write-up design and construction were carried out by me with deep intensive and extensive research work under the strict supervisor of Engr K.C Ugwu.  I all give credit to the authors of the textbooks whose I referred to in the cause of writing this project and its subsequent design and construction. In this... Continue Reading
    ABSTRACT This is a technical project write-up design and construction were carried out by me with deep intensive and extensive research work. I all give credit to the authors of the textbooks whose I referred to in the cause of writing this project and its subsequent design and construction. In this project, I shed light on the basic principle of... Continue Reading
    ABSTRACT A Linear Variable Differential Transformer (LVDT) was constructed having a primary winding of 245 turns and two secondary windings of 100 turns each. The device was calibrated with a graduated cylindrical rod. The graduated rod when inserted between the hollow tube which has the windings gave output voltages of ±0.046V, ±0.51V,... Continue Reading
    ABSTRACT This project work-up deals on the design and construction of a single phase step down nations fermor, with raking IKVA, 240V/11OV, 80V 12U, 6V. It is a multi-circuit transformer that has one input as the primary and tappins to produce the... Continue Reading
    ABSTRACT This project work-up deals on the design and construction of a single phase step down nations fermor, with raking IKVA, 240V/11OV, 80V 12U, 6V. It is a multi-circuit transformer that has one input as the primary and tappins to produce the output (secondary). It is considered as a single coil in series with the supply and a common coil to... Continue Reading
    ABSTRACT This project work-up deals on the design and construction of a single phase step down nations fermor, with raking IKVA, 240V/11OV, 80V 12U, 6V. It is a multi-circuit transformer that has one input as the primary and tappins to produce the output (secondary). It is considered as a single coil in series with the supply and a common coil to... Continue Reading
    ABSTRACT This project involves the development of a console that allows multiple inputs (3 inputs) and a single output to a screen through the use of software. The micro controller which serves as the ‘heart’ of the hardware was encoded using C programming language. These lines of code enable the micro controller to switch to the selected... Continue Reading
    TABLE CONTENTS Approval page Dedication Abstract Acknowledgement Table of content CHAPTER ONE INTRODUCTION 1.1  Relevance of project 1.2  Site inspection 1.3  Evolution of road network in nigeria 1.4  Motor vehicle characteristic that affects road design data 1.5  Drivers and their characteristics 1.6  Reconnaissance survey 1.6.1Chain survey... Continue Reading
    CUSTOMER SERVICES IN FINANCIAL INSTITUTIONS, A STEP TOWARDS IMPROVING PROFITABILITY (A CASE STUDY OF UNION BANK PLC, OKO) CHAPTER ONE INTRODUCTION The topic of this research work is of course, customer services in the financial institutions, a step towards improving profitability (a case study of Union Bank Plc Oko).         Woodruff (1997)... Continue Reading