+234 813 0686 500
+234 809 3423 853
info@grossarchive.com

DESIGN AND SIMULATION OF A PERSONNAL COMPUTER TEMPERATION CONTROL SYSTEM

  • Type:Project
  • Chapters:5
  • Format:Microsoft Word
(Computer Science Project Topics & Materials)

ABSTRACT

Temperature determines the survival of all natural creatures and as well the operational fitness of all scientific invention, it is quite important to every aspect of human endeavor and its control is as important as the temperature itself.

This research work centers its study on temperature and its control with a view of designing and implementing a reliable computerized system that will automatically contribute in temperature control.

The new system will be able to automatically detect temperature within a  particular environment at a particular time and be able to give the desired output concerning the aim of its development.  The new system pivots its temperature on room temperature, controlling the regulation of the room air conditioning system for good up- keep of the habitants.  The new system can as well be used in other areas of temperature control by adjusting the target point of the design.

ORGANIZATION OF WORK

This project work is organized into two phases. The front pages and the main write up.

The front pages which consists of the title page, certification, dedication, acknowledgement, organization of work, abstract and table of contents.

The second phase, which is the work, is made up of seven chapters.

The first chapter is the introduction, which consist of the statement of problem, aims and objectives, purpose of study, limitation and definition of term.

Chapter two is the literature review chapter three is systems investigation and analysis.  Chapter four is the design of the new system.  Chapter five is implementation.  Chapter six is documentation while chapter seven contained the conclusion and recommendation.  And finally is bibliography

TABLE OF CONTENTS

Title Page

Organization of work

Abstract

Table of content

CHAPTER ONE

1.0       INTRODUCTION

1.1       Statement of the problem

1.2       Purpose of the study

1.3       Aim and Objectives

1.4              Scope of study

1.5              Constraints

1.6              Assumption

1.7              Definition of Terms

CHAPTER TWO

2.0       Literature Review

CHAPTER THREE

3.0       Description and analysis of the existing system

3.1       Fact finding methods used

3.11     References to written document

3.1.2    Browsing of internet

3.2              Input, Process, Output analysis

3.2.1        Input, analysis

3.2.2        Input format

3.2.3        Process,  analysis

3.2.4        Output, analysis

3.2.5        Input format

3.3              Problem of the existing system

3.4              Objective of the existing system

3.5       Justification of the new existing system

CHAPTER FOUR

4.0       The design of the new system

4.1       Output specification and design

4.2       Input specification  and design

4.3              File design

4.4              File structure

4.5              Procedure chart

4.6              System flowchart

4.7              System requirement

4.71          Hardware requirement

4.72          Soft ware requirement

CHAPTER FIVE

5.0       Implementation

5.1              Program design

5.2              Pseudo code

5.3              Program flowchart

CHAPTER SIX

6.0              Documentation

6.1       Choice of language

6.2              Language introduction

6.3              Change over method

CHAPTER SEVEN

7.0              Conclusion

7.1       Recommendation

Bibliography

CHAPTER ONE

1.0              INTRODUCTION

Every living and non-living things thrived on a particular temperature within a particular environment at a particular time.  Temperature is a concept that cannot easily be shelved for its importance to man and the thing in its surrounding.  The room temperature is convenient for man’s survival, the water temperature is convenient for the survival of fishes and other sea animals, the incubator temperature is convenient for hatching of chick from eggs.  This is the same for every other living thing on the face of the earth.  The same is also applicable to non-living thing on earth, chemicals, iron etc of different kinds thrives under different temperature.

Due to these facts, there is need for adequate control of temperature in areas where nature is not automatically controlling temperature.  For example, chicks can only be hatched in a particular temperature and based on that, the incubator was designed to control the temperature for hatching the eggs of chicks. The incubator makes the temperature steady not to fall low or above the hatching temperature.  The same is applicable to almost all manufacturing companies, breweries, seasoning company etc.

Temperature is very important in production of a lot of products and seasoning.

Temperature control requires expertise and accuracy for effectiveness and reliability the computer with its sophisticated feature assuredly can handle the control of temperature.

1.1       STATEMENT OF THE PROBLEM

Temperature control system need to be designed on accuracy with effective reception and detection of environment temperature.  This control has to be achieved best without any human intervention.

Ineffective temperature control system cause a lot of damages to the system the procedures it is designed for.

1.2       PURPOSE OF STUDY

The purpose of this study is to design simulation of a personal computerized temperature control system which is built on accuracies, comprehensiveness and which will also be cost effective

1.3       AIMS/OBJECTIVES

The aim of   this project work is to design an effective temperature control system, which is computer based and which will provide solution to the inaccuracy  of he manual system

The objectives include:

1.                  To design a temperature control system that will be very accurate and effective

2.                  To design a system that will be quite automatic without any human intervention in its control

1.4       SCOPE OF STUDY

This work is to simulate an internal temperature control system for personal temperature control.

DESIGN AND SIMULATION OF A PERSONNAL COMPUTER TEMPERATION CONTROL SYSTEM
Share This

Details

Type Project
Department Computer Science
Project ID CPU0956
Price ₦3,000 ($9)
Chapters 5 Chapters
Format Microsoft Word

500
Leave a comment...

    Details

    Type Project
    Department Computer Science
    Project ID CPU0956
    Price ₦3,000 ($9)
    Chapters 5 Chapters
    Format Microsoft Word

    Related Works

    ABSTRACT Temperature determines the survival of all natural creatures and as well the operational fitness of all scientific invention, it is quite important to every aspect of human endeavor and its control is as important as the temperature itself. This research work centers its study on temperature and its control with a view of designing and... Continue Reading
    ABSTRACT This work has been designed to assist computer engineers to effectively diagnose problems in computer sub-systems, such as hard disk, floppy disk drives, monitors, keyboard, etc. Equipped with this system, the user can easily detect when a particularly subsystem... Continue Reading
    ORGANIZATION OF WORK This project has seven chapters. Each chapter deals with the chapter one. This chapter introduces the statement of the problem purpose of this study. The aims and objectives of the program. The scope, limitations and constraints, assumptions of program, and the... Continue Reading
    ABSTRACT A prepaid meter monitoring system with SMS alert is designed simulated and constructed using microcontroller to achieve a unique transmission of SMS messages to designated mobile phone numbers. The work is a response to the need to checkmate commercial energy losses in utility electrical distribution system. The system utilizes a normally... Continue Reading
    IN NIYYA FARMS NIGERIA LIMITED KADUNA   ABSTRACT The primary objective of this research work, the application of computer technology on the inventory control system as a productivity improvement strategy in Niyya Farm Nigeria limited... Continue Reading
    (A CASE STUDY OF IMO STATE TRANSPORT COMPANY ITC OWERRI) Abstract The project looked into the concept of simulation system that provides method of handling problems, which are difficult or costly to solve analytically. It is also allows the study or learning the behavior of the system. To text hypothesis and design a... Continue Reading
    ABSTRACT The project looked into the concept of simulation system that provides method of handling problems, which are difficult or costly to solve analytically. It is also allows the study or learning the behavior of the system. To text hypothesis and design a system that may be available for direct observation or... Continue Reading
    ABSTRACT A system to control a hydraulic industrial arm using a4- bit microcomputer is described. A supervisory minicomputer can handle global routines such as science analysis and task and trajectory planning while the microcomputer attends to the control of the arm. The... Continue Reading
    ABSTRACT This project topic “Secured Wireless Network” was carried out with a view to deploying effective security for wireless networks. The project developed a system that lets typical users easily build a highly secured wireless network. My aim is to show how user interface can be applied to provide a complete solution for securing wireless... Continue Reading
    Abstract A solar ovenis a device that converts solar energy into useful heat in a confined space (oven chamber) which can be utilised for cooking and baking purposes.The oven consists of plane reflectors to concentrate the solar radiation on the collector.The heat gain is maximum if the collector and reflectors are continuously adjusted such... Continue Reading