+234 813 0686 500
+234 809 3423 853
info@grossarchive.com

AFETY MANAGEMENT PROGRAMME IN MANUFACTURING FIRM

  • Type:Project
  • Chapters:3
  • Pages:40
  • Format:Microsoft Word
(Business Administration and Management Project Topics & Materials)

SAFETY MANAGEMENT PROGRAMME IN MANUFACTURING FIRM USING THE NINTH MILE ENUGU AND GOLDEN GUNIEA PLC (NBPC) UMUAHIA FOR THE CASE STUDY
CHAPTER ONE

1.1     BACKGROUND OF THE SUBJECT MATTER

There is no double that industry is one of the most important sectors of the economy.  The fact that a major share of the nations yearly budget goes to the industrial sector remains a testimony.  In Nigeria industrialization, virtually unknown twenty years ago is providing the much needed new dimension into which the national economy can expand and diversity.

With dynamism in industrial activities, new and modern sophisticated technology is involved, when these equipment are not used by trained workers, accidents could result because of wrong handling causing damage to equipment and the advice that why brain (1990) gain the advice that safety awareness should be created in the minds of management of all manufacturing organization no matter their size or level of growth.  It goes without saying that accidents occur in an industry and if not minimized or checked would ultimately affected productive capacity of the workers as well as the management of the industry and economy in general.

Having known that accidents prevent organization from accomplishing objectives and goals, the question now should be, what measures are the 50- called management of industry doing to ameliorate, if not totally eradicate the rate of injury and accidents occurrence in the government owned industry.  The managers are expected to be at the upper echelon, introducing measures and mounting pressure to ensure safety and protection against.  Their hazards and accident in the work environment. Unfortunately some management look at safety  programme as added cost to the organization hence, they have tended to relent to forestalling the possible hazard in the firm.

In addition to this, Shublin in Udeze (2000:243) indicated that management should realize that reduction of accident covers their high direct and indirect accident costs of more than pay for the expense of a continuing safety programme.

There has been a lot of hues and cries calling for the attention of the management towards work safety, there has equally been a factory act of 1958 which stipulates certain safety standards in manufacturing companies; there has also been the government insistence that safety should be given priority attention as a part of the social responsibility of the organization it is in the light of all these that this study has embarked on finding out the impact of safety management on workers  performance in government owned industries.

But the problem has often been that management that employees does not feel responsible for ensuring that such hazards are removed.

The safety management programme that should trail industrialization is lacking.

1.2     PROBLEMS ASSOCIATED WITH THE SUBJECT MATTER

Accident and hazards are the inevitable phenomenon of any human organization but the concern of every rational and curious researcher is on the measures that should be applied to minimize the occurrence of accident in government owned industry.

Furthermore, it is difficult to described a situation in which in spite of various academics writes ups government concerned about workers safety. This is why Anibata (1991:38) in his analysis opi9ned that as industrial workers depends on his employer, as being able to providing him with his safety requirements needed for his work and to receive some compensation when his health is affected, these requirement when absent creates laxity in workers.

Workers in the government owned industry are often injured, maimed and incapacitated as a result of industrial resident  and to add that some management are not even aware of their role and responsibility as regards to industrial accident.  Though some argue that however careful we are, accident can still happen but, what of a situation where workers are not given adequate training or where management are not concerned about safety.

For the employees to be committed and work toward achieving organizational goal and objective their own individual need and aspiration must also be met. Thus, it is the responsibility of the management to ensure that all employees are properly equipped and trained so that employee would work safety and productively.

Good safety behaviour should be a condition of employment and should be treated in the same way as any other performance criterion.  Poor safety performance in any section of the business demands correction which good performance needs recognition.  There fore, management to achieve its set goals must foster and nurture a committed work force, which can be achieved by setting their aspiration fulfilled.  Attention channeled towards improving the environment upon where workers work and their safety considerations, help in goal attainment for example, a Nigerian worker who feels that his life is as stake when operating a machine without adequate protective equipment might not put his best no matter the monetary rewards because life  has no duplicate.

1.3     PROBLEM(S) THAT WILL BE CONCERN WITH

The following research question were used to draft the questionnaire to the study .

i.        How does your company ensure effective implementation of her safety management programme?

ii.       What are the positive effects on workers performance that result from the implementation of your company’s safety management prgramme?

iii.      How secure is your place of work against factory accidents?

iv.      What are the negative effects that your company’s safety management programmes have on workers performance?

1.4     THE IMPORTANCE OF STUDING THE AREA.

This study on the impact of safety  management programme in Nigeria industries would benefit the workers, companies and Nigeria in general if implemented for instance.

i.                   Would emphasize the role  of the working supervisors and the importance of his responsibilities for the safe operation of plants  control of people in a hazardous working environment.

ii.                 Would emphasize the type of training needed and given to the worker about safety at work place and developing safety consciousness.

iii.              Would motivate staff to work safety for the benefit of themselves, other and to the nation.

iv.              It will bring about a major improvement in safety performance in a way that will be sustained.

1.5     DEFINITION OF IMPORTANT TERMS.

The following terms have been used in a number of places in the study for the purpose of this research they have been used in the following sense .

SAFETY-   Freedom from accident in the work place.

ACCIDENT-       Any unpredicted unplanned event, which could result in personal in jury, damage to plant, in creased cast, loss of production and population of the environment.

HAZARD- A hazard is any condition that might operate against the safety workers.

IMPACT-   The  impression the programme made on the workers.

PERFORMANCE-       What is accomplished contrasted with capacity.

PPE- Personal protection equipment


REFERENCE

Anibata I. (1991) “ Risk Management in Nigeria Station Information “ Booklet                                       Vo. 12.

Brain G. (1990) “Safety at Work” in information Booklet on H.S.E (Warri                                              SDC Corporate Re. Prographic Center.

Udeze J.O (2000) “Human Resources” Management in Nigeria, Enugu Joe                                               Best Books.


AFETY MANAGEMENT PROGRAMME IN MANUFACTURING FIRM

Share This

Details

Type Project
Department Business Administration and Management
Project ID BAM1384
Price ₦3,000 ($9)
Chapters 3 Chapters
No of Pages 40 Pages
Format Microsoft Word

500
Leave a comment...

    Details

    Type Project
    Department Business Administration and Management
    Project ID BAM1384
    Price ₦3,000 ($9)
    Chapters 3 Chapters
    No of Pages 40 Pages
    Format Microsoft Word

    Related Works

    ABSTRAT The research is an earnest effort to evaluate the safety programmes used by firms to find out the impact of enhanced safety management programme in Nigeria industries. To achieve a good result, the... Continue Reading
    (A Case Study Of Unilever Plc Aba, Nigeria)   ABSTRACT The aim of this research work is to appraise “The impact of credit management on the profitability of a manufacturing firm focused on Unilever Nigeria Plc Aba”. This is because; trade credit is a short term source of... Continue Reading
    CHAPTER ONE INTRODUCTION 1.1 BACKGROUND OF THE STUDY Business is being set up for the purpose of making profit and satisfies consumer’s needs. The only means of meeting this need is through reduction on cost and increasing productivity. Therefore, on stressing on... Continue Reading
    THE IMPACT OF GOOD MANAGEMENT ON PRODUCTIVITY IN MANUFACTURING FIRM IN ANAMBRA STATE (A CASE STUDY OF GENERAL COTTON MILL ONITSHA) PREFACE The stock management in many business organization are often neglected and it is not realized that materials represent an equivalent amount of cash materials pilferage deterioration of materials and careless... Continue Reading
    ABSTRACT The effect of risk survey in a manufacturing  firm (a case of emenite Plc). Is over emphasized. Risk is the center of human activities and a manufacturing firm like Emenite will need the activities of risk management to survey. So it is only when there is adequate risk survey that the risk manager will be able to identify various risk... Continue Reading
      CHAPTER ONE GENERAL INTRODUCTION 1.1 INTRODUCTION Before the advent of computer in Nigeria manufacturing firms, just like other areas of the society were used to manual method operation. This is to say, the operation which involves the production, transaction, customer registration stock system and balancing of account were carried out... Continue Reading
      CHAPTER ONE GENERAL INTRODUCTION 1.1 INTRODUCTION Before the advent of computer in Nigeria manufacturing firms, just like other areas of the society were used to manual method operation. This is to say, the operation which involves the production, transaction, customer registration stock system and balancing of account were carried out... Continue Reading
    ABSTRACT This work was carried out to appraise the Cost Reduction Techniques and Productivity in a Manufacturing Firm. Cadbury Nigeria Plc. was chosen as a case study. The researcher is assessing the Cost Reduction Techniques and Productivity of Manufacturing Firm. Organization is faced with myriad of challenges. Some of these challenges are... Continue Reading
    (A CASE STUDY OF CHAMPION BREWERIES PLC, UYO) CHAPTER ONE BACKGROUND OF THE STUDY 1.1       INTRODUCTION In a manufacturing firm, the inevitable fact is that materials, trained personnel, proper funding and good management constitute the component part of... Continue Reading
    ABSTRACT The effective movement of materials is being seen as business in its own right materials heading is a feature of almost all the companies, although it has for many years been an unexplored area in recent time; this area has been many changes and which continues to change new equipment and machines are appearing in the market and most firm... Continue Reading