+234 813 0686 500
+234 809 3423 853
info@grossarchive.com

DESIGN AND CONSTRUCTION OF INTRUDER DETECTOR ALARM SYSTEM WITH DIRECTION/LOCATION DISPLAY

  • Type:Project
  • Chapters:5
  • Pages:65
  • Format:Microsoft Word
(Computer Engineering Project Topics & Materials)

DESIGN AND CONSTRUCTION OF INTRUDER DETECTOR ALARM SYSTEM WITH DIRECTION/LOCATION DISPLAY

ABSTRACT

This project work deals on the Design and Construction of Intruder Detector Alarm System with Direction/Location Displaywhich is capable of detecting intrusion at any location, sound and alarm and display the exact location of the intruder using seven segment displays. This project work is realized using top down methodology with active and passive components available in the local market. It is realized in different modules, all combined to form one function unit. The inputs are opto-couplers configured with laser diodes and light Dependent Resistor. (LDR) which act as the electronic eyes installed at the sensory points. The control unit is made up of one short delay circuit, audio frequency generator, priority encoder and decoder, piezo-buzzer and single digit seven segment display. The system is packaged in a well furnished wooden material. This system does not record/display the intruder. In a case of simultaneous intrusion, the display shows the location with the highest priority. And the system is powered from MAINS supply. The result being a system which can detect intrusion,, sound an audible alarm and displays the exact location of the intruder. It has a wide a range of application in surveillance especially in industrial home security.

TABLE OF CONTENT

Title page       -           -           -           -           -           -           -           -           -           i

Certification page    -           -           -           -           -           -           -           -           ii

Approval page          -           -           -           -           -           -           -           -           iii

Dedication     -           -           -           -           -           -           -           -           -           iv

Acknowledgement               -           -           -           -           -           -           -           v

Abstract         -           -           -           -           -           -           -           -           -           vi

Table of content       -           -           -           -           -           -           -           -           vii

List of tables             -           -           -           -           -           -           -           -           -          ix

List of figures           -           -           -           -           -           -           -           -           x

Chapter One

Introduction

1.1.           Background of the study     -           -           -           -           -           -           1

1.2.           General description            -           -           -           -           -           -           1

1.3.           Aim and objectives              -           -           -           -           -           -           2

1.4.           Project significance            -           -           -           -           -           -           2

1.5.           Scope of the study   -           -           -           -           -           -           -           3

1.6.           Project report organization-           -           -           -           -           -           3

Chapter Two           

Literature Review 

2.1.           Historical background of the study           -           -          -           -           4         

2.2.           User of Buglar alarm-          -           -           -           -           -           -           4

2.2.1.     Application of burgular alarm       -           -           -           -           -           5

2.3.           The 74132 (Quad-2-input schimit trigger Nand gate)    -           -           5

2.4.           The seven segment display            -           -           -           -           -           6

2.5.           The Ne555 timer      -           -           -           -           -           -           -           8

2.6.           The Optical light sensor using LDR          -           -           -           -           12

2.7.           Other system components  -           -           -           -           -           -           15

Chapter Three

3.1.           Description of the system block diagram             -           -           -           25

3.2.           Block diagram representation of the system       -           -           -           25       

3.3.           System design specification           -           -           -           -           -           26

3.4.           Power Supply Unit Design  -           -           -           -           -           -           27

3.5.           Principle of operation of the system         -           -           -           -           28

3.6.           System Design calculation-           -           -           -           -           -           29

3.6.1.     Design of the power supply circuit           -           -           -           -           29

3.6.2.     Mono-stable multi-vibrator            -           -           -           -           -           -           30

3.6.3.     Transistor Design     -           -           -           -           -           -           -           30

Chapter Four

Implementation, Testing and Result

4.1.           Implementation        -           -           -           -           -           -           -           31

4.2.           Testing                       -           -           -           -           -           -           -           31

4.3.           Result             -           -           -           -           -           -           -           -           32

4.4.           Project packaging     -           -           -           -           -           -           -           33

4.5.           Bill of Engineering   -           -           -           -           -           -           -           34

Chapter five

Summary, Conclusion and Recommendation

5.1.           Summary of achievement   -           -           -           -           -           -           36

5.2.           Problem Encountered and solution           -           -           -           -           36       

5.3.           Conclusion    -           -           -           -           -           -           -           -           37

5.4.           Recommendation     -           -                      -           -           -           -           37

References    -           -           -           -           -           -           -           -           39

Use’s guide   -           -           -           -           -           -           -           -           40

LIST OF TABLES

2.1.      Logic table of priority Encoder (74147)  -           -           -           -           6

2.3. Different symbols of resistor -           -           -           -           -           -           17

2.4.      Resistor color code  -           -           -           -           -           -           -           18

4.1.      Bill of engineering quality -           -           -           -           -           -           34

LIST OF FIGURES

2.1.      Physical layout of SSD        -           -           -           -           -           -           7

2.2       Schematic Diagram of Seven Display       -           -           -           -           7

2.3.      Ne555 timer IC         -           -           -           -           -           -           -           8

2.4.      Internal block diagram of Ne555 Timer   IC        -           -           -           8

DESIGN AND CONSTRUCTION OF INTRUDER DETECTOR ALARM SYSTEM WITH DIRECTION/LOCATION DISPLAY

Share This

Details

Type Project
Department Computer Engineering
Project ID CPE0027
Price ₦3,000 ($9)
Chapters 5 Chapters
No of Pages 65 Pages
Format Microsoft Word

500
Leave a comment...

    Details

    Type Project
    Department Computer Engineering
    Project ID CPE0027
    Price ₦3,000 ($9)
    Chapters 5 Chapters
    No of Pages 65 Pages
    Format Microsoft Word

    Related Works

    ABSTRACT This project work deals on the Design and Construction of Intruder Detector Alarm System with Direction/Location Displaywhich is capable of detecting intrusion at any location, sound and alarm and display the exact location of the intruder using... Continue Reading
    CHAPTER ONE INTRODUCTION 1.1.          Background of the Study The industrial Electronics has changed the whole field of Engineering and technology is occurring so rapidly, even in developing countries. It is so because newer technologies overcome older ones. After the industrial revolution the world shifted towards the information... Continue Reading
    ABSTRACT             This project is design and construction of a sound detector with alarm system was done primarily to detector sound. It can be use in industrial and domestics. It employ four discreet stages with power supply which power the system.             The 1st block is pick up amplifier containing the microphone... Continue Reading
    ABSTRACT This project is design and construction of a sound detector with alarm system was done primarily to detector sound. It can be use in industrial and domestics. It employ four discreet stages with power supply which power the system. The 1st block is pick up amplifier containing... Continue Reading
    Abstract               During the invention of security system alarms, in the early 80s technology of system shadow which involves lighten and sensing of objects was at that age found during their experiments using a special material know as light dependent resistor which its family lies in the resistance serials. The development of... Continue Reading
    ABSTRACT This project report is a thesis written specifically to cover the design analysis construction, test and packaging of a multipurpose security system from electric component that can be easily be obtainable from the market. The report discusses the various unit and stages of the alarm system, thesis include:- a)     Clock generation... Continue Reading
    ABSTRACT This project deals on the design and construction of an intruder detector for home and office use. Security as one of the biggest issues in our world today and we need a system that will be able to monitor our home, offices and industries by using two sensing... Continue Reading
    ABSTRACT The intruder alarm system was designed and build in order to let the industrial and commercial company know how important alarm system is all  about. These can be of Good help if the intruder will look through this project and support for the development of this project as to let the Federal Government know that the young engineering of... Continue Reading
    ABSTRACT Burglar alarm circuit is made up of five major sections. The power supply section; it connects to the source of power, the trigger section which produces trigger current, touch section that controls the supply of power in the circuit, alarm section that sounds when current... Continue Reading
    ABSTRACT The main objective of this project was to ensure a proper security to car being parked in garage against theft or an intruder. The circuit uses three NE555 timers; one of the NE555 was wired as a monostable oscillator and remaining two were wired as tone generator and amplified to obtain a maximum audible sound. However, pin 2 of the... Continue Reading