Explore Project Topics on: TIMETABLING GENERATOR SYSTEM USING PARTICLE SWARM OPTIMIZATION

ABSTRACT Energy is a basic necessity for the economic development of a nation. There are different forms of energy, but the most important form is the electrical energy. A modern and civilized society is so much dependent on the use of electrical energy. Activities relating to the generation, transmission and distribution of electrical energy have... Continue Reading

ABSTRACT    The  effects  of  particle  size  and  particle  size  distributions  of  three clay samples, on their modulus of rupture were studied. The three clay samples were collected from natural clay deposits  at  Nsu;  Ohiya-  Umuahia;  and  Awo-Omamma  all  in south  eastern  Nigeria.  The  particle  size ... Continue Reading

Abstrac t In this work, a 2.8kva alternator was coupled to a 4 H.P dc motor acting as a prime mover to produce a fuel-less generator. The coupling was done using two crankshaft pulleys to match the speed of the alternator to that of the dc motor. Two 24v dc... Continue Reading

CHAPTER 1 INTRODUCTION 1.0 Background of Study Oil and Gas is considered to be one of the major sources of energy in the world due to its high energy density, easy transportability, and relative abundance. It is a vital factor in every country’s economy. Almost all items that we buy, use, and consume are products of oil. The EIA (Energy... Continue Reading

ABSTRACT Any problem has a set of valid results. It is said to form the solution space. In an optimization problem, the main aim or goal is to find results that maximize or minimize a set of criteria. If we look at the solution space as an n-dimensional space then essentially we are searching for a global minima or maxima in the solution space.... Continue Reading

ABSTRACT... Continue Reading

ABSTRACT Optimization is the process of transforming a piece of code to make more efficient(either in terms of time or space) without changing its output or side-effects. The onlydifference visible to the code’s user should be that it runs faster and/or consumes lessmemory. It is really a misnomer that the name implies you are finding an... Continue Reading

ABSTRACT Optimization is the process of transforming a piece of code to make more efficient (either in terms of time or space) without changing its output or side-effects. The only difference visible to the code’s user should be that it runs faster and/or consumes less memory. It is really a misnomer that the name implies you are finding an... Continue Reading

The difficulties of developing appropriate examination time table for institutions and tertiary is increasing. Institutions are enrolling more students into wider variety of courses in many different fields. For example, at Osun State Polytechnic, Iree, approximately 14,000 students have to be filled into about 150 exams over two and a half... Continue Reading

The difficulties of developing appropriate examination time table for institutions and tertiary is increasing. Institutions are enrolling more students into wider variety of courses in many different fields. For example, at Osun State Polytechnic, Iree, approximately 14,000 students have to be... Continue Reading

ABSTRACT This study sought to optimize the cost of distribution system of consumer goods in Nigeria with special interest in Seven-Up Bottling Company PLC, Aba Abia State products from their five (5) depots to sixteen (16) wholesale dealers. Sources of distribution were identified as the depots, while destinations or markets were identified as... Continue Reading

ABSTRACT Theaim of this study is to investigate why the implementation of Unity and Efficiency in Production(UEP)is not yielding the expected results in PAN. The overall operations, production and sales are still on the low trend.This survey examined how the adaptation of UEP tools and the level of functions integration relate to the overall... Continue Reading

ABSTRACT This study presents the modelling and optimization of a Hybrid Energy System (HES) for GSM Base Transceiver Station (BTS) sites in emerging cities. The aim is to ensure reliable and cost-effective power supply, considering the availability, dynamism and viability of energy sources. Theoretical approach is applied in the modelling,... Continue Reading

Abstract This thesis aims to extract d-axis machine parameters of a 214 MVA high-speed turbogenerator using well-established offline techniques. MATLAB/SIMULINK tool has been utilized to model the generator and perform sudden short-circuit (SSC) tests. Because constant speed operation of the generator is vital consideration for the accuracy of SSC... Continue Reading

Abstract Development of improved methods for the synthesis of copper nanoparticles is of high priority for the advancement of material science and technology. Herein, starch-protected zero-valent copper (Cu) nanoparticles have been successfully synthesized by a novel facile route. The method is based on the chemical reduction in aqueous copper... Continue Reading

Abstract Development of improved methods for the synthesis of copper nanoparticles is of high priority for the advancement of material science and technology. Herein, starch-protected zero-valent copper (Cu) nanoparticles have been successfully synthesized by a novel facile route. The method is based on the chemical reduction in aqueous copper... Continue Reading

Abstract Development of improved methods for the synthesis of copper nanoparticles is of high priority for the advancement of material science and technology. Herein, starch-protected zero-valent copper (Cu) nanoparticles have been successfully synthesized by a novel facile route. The method is based on the chemical reduction in aqueous copper... Continue Reading

ABSTRACT Nowadays, the destruction and pollution of humane environment has produced an ever growing awareness worldwide of the need for more effective sedimentation processes. The main aim of this project was to design and fabricate an experimental sedimentation rig with the objective to determine the rate of settling against time using calcium... Continue Reading

ABSTRACT Nowadays, the destruction and pollution of humane environment has produced an ever growing awareness worldwide of the need for more effective sedimentation processes. The main aim of this project was to design and fabricate an experimental sedimentation rig with the objective to determine the rate of settling against time using calcium... Continue Reading

ABSTRACT Nowadays, the destruction and pollution of humane environment has produced an ever growing awareness worldwide of the need for more effective sedimentation processes. The main aim of this project was to design and fabricate an experimental sedimentation rig with the objective to determine the rate of settling against time using calcium... Continue Reading

ABSTRACT This project was done to extract and characterize bean oil according to their particle sizes. The experiment was carried out using scent bean (i.e. ‘Ozaki’, ‘Ijilizi’or ‘Azamu’) as sample. The oils were extracted by solvent extraction /leaching extraction using n-hexane. Proximate analysis was carried out to obtain percentage... Continue Reading

ABSTRACT This project was done to extract and characterize bean oil according to their particle sizes. The experiment was carried out using scent bean (i.e. ‘Ozaki’, ‘Ijilizi’or ‘Azamu’) as sample. The oils were extracted by solvent extraction /leaching extraction using n-hexane. Proximate analysis was carried out to obtain percentage... Continue Reading

ABSTRACT This project was done to extract and characterize bean oil according to their particle sizes. The experiment was carried out using scent bean (i.e. ‘Ozaki’, ‘Ijilizi’or ‘Azamu’) as sample. The oils were extracted by solvent extraction /leaching extraction using n-hexane. Proximate analysis was carried out to obtain percentage... Continue Reading

DESIGN AND MANUFACTURE OF A FUEL-LESS GENERATOR ABSTRACT The fuel-less generator is a flywheel energy storage system (FESS) which has attracted new research attention recently in applications like power quality, regenerative braking and uninterruptible power supply (UPS). As a sustainable energy storage method, flywheel energy storage has become a... Continue Reading

Abstract In this work, a 2.8kva alternator was coupled to a 4 H.P dc motor acting as a prime mover to produce a fuel-less generator. The coupling was done using two crankshaft pulleys to match the speed of the alternator to that of the dc motor. Two 24v dc deep cycle batteries were also used as the exciter unit and a sustainable output voltage of... Continue Reading

Abstract In this work, a 2.8kva alternator was coupled to a 4 H.P dc motor acting as a prime mover to produce a fuel-less generator. The coupling was done using two crankshaft pulleys to match the speed of the alternator to that of the dc motor. Two 24v dc deep cycle batteries were also used as the exciter unit and a sustainable output voltage of... Continue Reading

ABSTRACT  A drastic change in the perception of electric energy . But at the same time there is misreading of FREE ENERGY. Energy becomes free only at a point after which we don’t have to pay for power generation after hiring the unit. By using the magnetic force of magnets continuous motion (Energy) is made. This magnet also produces a... Continue Reading

ABSTRACT  As technological advancement has been on the increase in our society many have fallen in love with technology and world want to have a feel in virtually  to every thing they do. A design has been made in combination of electrical and electronics to change over from one power sources to the other automatically and trip off generation... Continue Reading

ABSTRACT  A drastic change in the perception of electric energy . But at the same time there is misreading of FREE ENERGY. Energy becomes free only at a point after which we don’t have to pay for power generation after hiring the unit. By using the magnetic force of magnets continuous motion (Energy) is made. This magnet also produces a... Continue Reading

ABSTRACT As technological advancement has been on the increase in our society many have fallen in love with technology and world want to have a feel in virtually to every thing they do. A design has been made in combination of electrical and electronics to change over from one power sources to the other automatically and trip off generation after... Continue Reading