Explore Project Topics on: ANALYSIS OF COOKING ENERGY IN NIGERIA
Related Works
ABSTRACT This study estimated price and income elasticities of energy demand in Nigeria. The objective of the study was to examine the responsiveness of demand for energy to changes in price of energy and per capita income in Nigeria. The demand for petroleum product (gasoline and diesel), proxy for energy demand is the dependent variable, while... Continue Reading
The energy generation and power consuming loads at Brass LNG facility located in Brass Island, Bayelsa State Nigeria were analyzed and compared with expected demand changes and means of minimizing cost and greenhouse gas emission were also proffered with wind and solar energy penetration into the overall power mix . The wind and solar hybrid power... Continue Reading
- Type:Project
- ID:ELE0383
- Department:Electrical Engineering
- Pages:33
The energy generation and power consuming loads at Brass LNG facility located in Brass Island, Bayelsa State Nigeria were analyzed and compared with expected demand changes and means of minimizing cost and greenhouse gas emission were also proffered with wind and solar energy penetration into the overall power mix . The wind and solar hybrid power... Continue Reading
- Type:Project
- ID:ELE0249
- Department:Electrical Engineering
- Pages:33
An energy audit on the Brass Liquified Natural Gas plant at Brass Island former Agip facility was carried. The average offshore windspeed and wave return periods for 12months were measured for their wind and wave energy potentials. Also, the solar insolation for the location was collected for a 12month period. A pilot design based on... Continue Reading
- Type:Project
- ID:MCE0301
- Department:Mechanical Engineering
- Pages:33
An energy audit on the Brass Liquified Natural Gas plant at Brass Island former Agip facility was carried. The average offshore windspeed and wave return periods for 12months were measured for their wind and wave energy potentials. Also, the solar insolation for the location was collected for a 12month period. A pilot design based on... Continue Reading
- Type:Project
- ID:MCE0203
- Department:Mechanical Engineering
- Pages:33
ABSTRACT The development and utilization of energy has led to environmental degradation with associated health hazard. Hence the trust of this project is to optimize energy mix in a reliable, affordable, available, safe, efficient, effective and sustainable way at control cost subject to environmental constraints. In other to achieve the desired... Continue Reading
- Type:Project
- ID:CVE0215
- Department:Civil Engineering
- Pages:181
ABSTRACT This research work is aimed at using the energy and exergy analysis with thermodynamic data to suggest improvements in the performance of steam and gas turbine power plants. In this regard, specific data from Egbin steam power plant and Geregu I gas turbine power plant were used for the analysis. In the analysis, scientific tools such as... Continue Reading
- Type:Project
- ID:MCE0258
- Department:Mechanical Engineering
- Pages:301
8.
COMPARISON OF THREE STATISTICAL METHODS FOR ESTIMATING WEIBULL PARAMETERS FOR WIND ENERGY ANALYSIS
There is a crucial need in the mainland regions of Nigeria to enhance the development of wind technology and engineering, which is essential for the designing of Wind Energy Conversion Systems (WECS). The Weibull Probability Density Function (PDF) with two parameters is widely accepted and commonly utilized for modelling, characterizing and... Continue Reading
9.
COMPARISON OF THREE STATISTICAL METHODS FOR ESTIMATING WEIBULL PARAMETERS FOR WIND ENERGY ANALYSIS
There is a crucial need in the mainland regions of Nigeria to enhance the development of wind technology and engineering, which is essential for the designing of Wind Energy Conversion Systems (WECS). The Weibull Probability Density Function (PDF) with two parameters is widely accepted and commonly utilized for modelling, characterizing and... Continue Reading
EXECUTIVE SUMMARY The global energy market is looking for new sources of non-conventional energy whereby existing methods of energy generation like Solar Photovoltaics have technologically surged. This advancement has led to higher adoption by consumers in residential and commercial sectors. Government policies have also been favourable in support... Continue Reading
- Type:Project
- ID:ACC2251
- Department:Accounting
- Pages:50
EXECUTIVE SUMMARY The global energy market is looking for new sources of non-conventional energy whereby existing methods of energy generation like Solar Photovoltaics have technologically surged. This advancement has led to higher adoption by consumers in residential and commercial sectors. Government policies have also been favourable in... Continue Reading
- Type:Project
- ID:ACC2843
- Department:Accounting
- Pages:50
ABSTRACT The purpose of the construction is aimed at producing heat energy for commercial use by turning liquid fuel(kerosene).the construction was successful by appropriate selection of engineering material favourably mild steel(blacksheet) and steel iron for special p2rts. The technological properties passed by the chosen mild steel are;... Continue Reading
- Type:Project
- ID:CNG0405
- Department:Chemical Engineering
- Pages:53
ABSTRACT The purpose of the construction is aimed at producing heat energy for commercial use by turning liquid fuel(kerosene).the construction was successful by appropriate selection of engineering material favourably mild steel(blacksheet) and steel iron for special p2rts. The technological properties passed by the chosen mild steel are;... Continue Reading
- Type:Project
- ID:CNG0168
- Department:Chemical Engineering
- Pages:65
ABSTRACT The purpose of the construction is aimed at producing heat energy for commercial use by turning liquid fuel(kerosene).the construction was successful by appropriate selection of engineering material favourably mild steel(blacksheet) and steel iron for special p2rts. The technological properties... Continue Reading
- Type:Project
- ID:CNG0029
- Department:Chemical Engineering
- Pages:57
ABSTRACT The purpose of the construction is aimed at producing heat energy for commercial use by turning liquid fuel(kerosene).the construction was successful by appropriate selection of engineering material favourably mild steel(blacksheet) and steel iron for special p2rts. The technological properties passed by the chosen mild steel are;... Continue Reading
- Type:Project
- ID:CNG0210
- Department:Chemical Engineering
- Pages:53
Abstract The purpose of the construction is aimed at producing heat energy for commercial use by turning liquid fuel(kerosene).the construction was successful by appropriate selection of engineering material favourably mild steel(blacksheet) and steel iron for special p2rts. The technological properties... Continue Reading
- Type:Project
- ID:CNG0064
- Department:Chemical Engineering
- Pages:54
Abstract The purpose of the construction is aimed at producing heat energy for commercial use by turning liquid fuel(kerosene).the construction was successful by appropriate selection of engineering material favourably mild steel(blacksheet) and steel iron for special p2rts. The technological properties passed by the chosen mild steel are;... Continue Reading
- Type:Project
- ID:CNG0171
- Department:Chemical Engineering
- Pages:65
Production of biodiesel from micro algae oil... Continue Reading
- Type:Project
- ID:IDC0062
- Department:Industrial Chemistry
- Pages:37
Production of biodiesel from micro algae oil... Continue Reading
- Type:Project
- ID:IDC0018
- Department:Industrial Chemistry
- Pages:37
Abstract Biodiesel is a renewable fuel that will soon be fully accepted in the commercial world but there are limitations to its use that need improvement. The use of oxygenated additives have improved the burning/fuel qualities of conventional diesel and gasoline. These oxygenates may also improve the qualities of biodiesel. This paper focuses on... Continue Reading
- Type:Project
- ID:PEE0072
- Department:Petroleum Engineering
- Pages:49
ABSTRACT The study titled 'The effect of temperature and cooking time on the protein content of three species of cowpea' is aimed at determining and comparing temperature effect on the protein content of cowpea. Three different species of cowpea was obtained at tudun wada market. The cowpea sample was cooked at different temperature and cooking... Continue Reading
- Type:Project
- ID:MHS0114
- Department:Medical and Health Science
- Pages:19
Abstract The study focused on the effect of energy consumption and environmental degradation on economic growth in Nigeria. The empirical analysis that was carried out to achieve the objectives mentioned above were diagnostic tests such as unit root, co-integration, Error Correction Model (ECM) and ordinary least square (OLS) which aimed at... Continue Reading
Abstract The study focused on the effect of energy consumption and environmental degradation on economic growth in Nigeria. The empirical analysis that was carried out to achieve the objectives mentioned above were diagnostic tests such as unit root, co-integration, Error Correction Model (ECM) and ordinary least square (OLS) which aimed at... Continue Reading
Firewood is part of the emergency supplies given to refugees for domestic fuel needs in Kakuma Refugee Camp in Kenya’s remote North-West. However getting adequate supplies for the sprawling refugee camp has proved to be increasingly challenging and environmentally damaging. Solar cooking projects have been implemented as possible solutions but... Continue Reading
- Type:Project
- ID:BAM3485
- Department:Business Administration and Management
- Pages:105
ABSTRACT The purpose of this study was to explore the tendency of decision making by consumers while purchasing product brands when considering the importance of the brand name. The study was conducted among Kampala International University students. The main research objective was on how consumers’ choices are made in respect to available... Continue Reading
- Type:Project
- ID:BAM2984
- Department:Business Administration and Management
- Pages:69
ABSTRACT This project is designed to determine households' access to domestic water supply via mechanical and non-mechanical energy system in Usin, Ikole local government area Ekiti State Nigeria, in terms of quality and quantity as the importance of adequate safe water supply to human health cannot be over emphasized. However, safe/improve... Continue Reading
- Type:Project
- ID:CVE0197
- Department:Civil Engineering
- Pages:100
ABSTRACT The concept of Superconductors in relation to energy gap was considered in this study. The occurrence of the Meissner effect indicates that superconductivity cannot be understood simply as the idealization of perfect conductivity in classical physics . The major aim of this project is to study the concept of energy gap in... Continue Reading
ABSTRACT The concept of Superconductors in relation to energy gap was considered in this study. The occurrence of the Meissner effect indicates that superconductivity cannot be understood simply as the idealization of perfect conductivity in classical physics . The major aim of this project is to study the concept of energy gap in super conductors... Continue Reading
ABSTRACT Hydrogen is an energy carrier that can transform our fossil fuel dependent economy into a hydrogen economy; t can provide an emission free transportation fuel. Hydrogen has the highest combustion energy per batter relative to any other fuel. It is more efficient on a weight basis than fuels used currently. It offers 2-3 times more... Continue Reading
- Type:Project
- ID:SLT0176
- Department:Science Lab Technology
- Pages:44
ABSTRACT Hydrogen is an energy carrier that can transform our fossil fuel dependent economy into a hydrogen economy; t can provide an emission free transportation fuel. Hydrogen has the highest combustion energy per batter relative to any other fuel. It is more efficient on a weight basis than fuels used currently. It offers 2-3 times more... Continue Reading
- Type:Project
- ID:SLT0136
- Department:Science Lab Technology
- Pages:44
