Explore Project Topics on: DESIGN AND CONSTRUCTION OF HOME MADE POP CORN MACHINE

ABSTRACT             A machine for corn shelling is highly and greatly needed to consistency of usage of corn in local and international levels.             With regards to this indispensable needs, a corn shelling machine is designed which operates to remove the corn grains and leaving the cobs intact.... Continue Reading

CHAPTER ONE INTRODUCTION The project is a pre-requisite for the award of Higher National Diploma (HND) in Mechanical Engineering. The project “Design and fabrication a corn shelling machine” is indeed an essential one in a time like this when almost al human endeavour is embracing technology for... Continue Reading

ABSTRACT This Machine is design and fabricate as a prerequisite for the award of a Higher National Diploma. We sketch different designs which after consideration of many factors like the machine efficiency, the cost of materials e.t.c before we finally embark on this machine. The machine major component are the shaft, the inner barrel, the outer... Continue Reading

ABSTRACT A machine for corn shelling is highly and greatly needed to consistency of usage of corn in local and international levels. With regards to this indispensable needs, a corn shelling machine is designed which operates to remove the corn grains and leaving the cobs intact. In attainment to... Continue Reading

CHAPTER ONE INTRODUCTION The project is a pre-requisite for the award of Higher National Diploma (HND) in Mechanical Engineering. The project “Design and fabrication a corn shelling machine” is indeed an essential one in a time like this when almost al human endeavour is embracing technology for efficiency and realiability. First a corn... Continue Reading

ABSTRACT An electric popcorn machine is machine that is used to popcorn for human consumption. It uses electricity as it sources of energy, transfer it energy, that is used to pop the Corn. Also it has a stirrer, which rotate due to the convection of electrical energy from the source to mechanical energy in the motor, the stirrer tons the corn so... Continue Reading

ABSTRACT An electric popcorn machine is machine that is used to popcorn for human consumption. It uses electricity as it sources of energy, transfer it energy, that is used to pop the Corn. Also it has a stirrer, which rotate due to the convection of electrical energy from the source to mechanical energy in the motor, the stirrer tons the corn so... Continue Reading

ABSTRACT An electric popcorn machine is machine that is used to popcorn for human consumption. It uses electricity as it sources of energy, transfer it energy, that is used to pop the Corn. Also it has a stirrer, which rotate due to the convection of electrical energy from the source to mechanical energy in the motor, the stirrer tons the corn so... Continue Reading

ABSTRACT An electric popcorn machine is machine that is used to popcorn for human consumption. It uses electricity as it sources of energy, transfer it energy, that is used to pop the Corn. Also it has a stirrer, which rotate due to the convection of electrical energy from the source to mechanical energy in the motor,... Continue Reading

ABSTRACT This project presents a design and implementation of new advanced Security power control using Android power switch system that uses WiFi technology as a network infrastructure connecting its parts. The proposed system consists of two main components; the first part is the server (web server), which presents system core that manages,... Continue Reading

ABSTRACT This project presents a design and implementation of new advanced Securitypower control using Android power switch system that uses WiFi technology as anetwork infrastructure connecting its parts. The proposed system consists of twomain components; the first part is the server (web server), which presents systemcore that manages,... Continue Reading

ABSTRACT             Parameters on which clear prints depends were comprehensively investigated.  The study revealed that clear print depends on the impressed pressure, the working temperature and the silver print paper.   Also studied were the manners of dependence of these parameters on prints impressed on sheets of varied... Continue Reading

ABSTRACT           Parameters on which clear prints depends were comprehensively investigated.  The study revealed that clear print depends on the impressed pressure, the working temperature and the silver print paper.   Also studied were the manners of dependence of these parameters on prints impressed on sheets of varied... Continue Reading

ABSTRACT This work is an attempt to evolve a quicker and easier method of achieving cylindrical shape object from a work price. This will no double save considerable human labour and time wastage involved in traditional manual method of carving. To achieve this preliminary experiment was carried out... Continue Reading

ABSTRACT Parameters on which clear prints depends were comprehensively investigated. The study revealed that clear print depends on the impressed pressure, the working temperature and the silver print paper. Also studied were the manners of dependence of these parameters on prints impressed on... Continue Reading

ABSTRACT This project deals on the design and construction of an intruder detector for home and office use. Security as one of the biggest issues in our world today and we need a system that will be able to monitor our home, offices and industries by using two sensing... Continue Reading

(A CASE STUDY OF BENIN CITY IN EDO STATE). ABSTRACT This research takes a look at the consumption behaviour of Nigerians towards home made goods. The reasons for Nigerians preference of foreign good to home made ones. Comparison between home and foreign made goods. And analysis of... Continue Reading

ABSTRACT There is need for the hygienic processing of cassava prevalent conditions in the commercial grating areas of this staple food show a susceptibility to food contamination.  A home scale cassava grater was improved on in a design and fabrication.  Machine efficiency, safety factors, and portability were considered in this research.  The... Continue Reading

CHAPTER ONE 1.0 INTRODUCTION 1.1 BACKGROUND Cassava which is known biologically as “manihotesculentacrantz” is a crop which has many varieties. Cassava, is a perennial woody shrub in the Euphorbiaceous (Spurge family) native to South America, but now grown in tropical and sub-tropical areas... Continue Reading

Abstract Welding is a way of heating pieces of metal using electricity or a flame so that they melt and stick together. It can simply be defined as the process of joining two or more pieces of metal to make the act as a single piece. This is often done by melting the work pieces and adding a filler material to form a pool of molten material that... Continue Reading

CHAPTER ONE INTRODUCTION 1.1 THE BACKGROUND Welding is a way of heating pieces of metal using electricity or a flame so that they melt and stick together. It can simply be defined as the process of joining two or more pieces of metal to make the act as a single piece. This is often... Continue Reading

ABSTRACT The design and fabrication of a reciprocating nail gasket is a new innovation in technology. The one in existence is manually operated. In which a punch that is adjacent to a die is mounted to the handle which is attached to the shaft. A helical spring that is incorporated to the... Continue Reading

Abstract Welding is a way of heating pieces of metal using electricity or a flame so that they melt and stick together. It can simply be defined as the process of joining two or more pieces of metal to make the act as a single piece. This is often done by melting the work pieces and adding a filler material to form a pool of molten material that... Continue Reading

ABSTRACT Packaging of food which is viable means of  business opportunity has been exploited by individuals and corporate bodies for a very long time because the importance of packaging food products are very enormous ranging from protection of the product to preventing the food from spoiling. There is no way one can successfully go into business... Continue Reading

This project seek to modify the existing cassava grating machine to make it to be self-feeding in operation, to make the operation of the machine easier, safer The existing processing techniques used in the production of cassava starch and cassava dough leaves much to be desired. There are difficulties in the grating of the cassava dough, since... Continue Reading

The main aim and objective of this project is to design and build and arc welding machine that operates on 36vdc at variable frequency which of benefit to urban area. This reduces the weight and size of the transformer use for welding. To have an arc welding machine that is more efficient which produce neat welding. INTRODUCTION Welding is a way... Continue Reading

This project seek to modify the existing cassava grating machine to make it to be self-feeding in operation, to make the operation of the machine easier, safer The existing processing techniques used in the production of cassava starch and cassava dough leaves much to be desired. There are difficulties in the grating of the cassava dough, since... Continue Reading

This project seek to modify the existing cassava grating machine to make it to be self-feeding in operation, to make the operation of the machine easier, safer The existing processing techniques used in the production of cassava starch and cassava dough leaves much to be desired. There are difficulties in the grating of the cassava dough, since... Continue Reading

ABSTRACT Packaging of food which is viable means of business opportunity has been exploited by individuals and corporate bodies for a very long time because the importance of packaging food products are very enormous ranging from protection of the product to preventing the food from spoiling. There is no way one can successfully go into business... Continue Reading

ABSTRACT The design and fabrication of a reciprocating nail gasket is a new innovation in technology. The one in existence is manually operated. In which a punch that is adjacent to a die is mounted to the handle  which  is attached to the shaft. A helical spring that is incorporated to the shaft of the punch, helps the handle return to its... Continue Reading