Explore Project Topics on: Utilization of waste plastic and rubber for commercial use

ABSTRACT Plastic and Rubber materials have become the corner stone of our lives, so it leads to generation of huge quantity of waste. These waste materials are either mixed with municipal solid waste or dumped in an open area leading to increase in the area covered under waste land. Plastic and rubber waste, if not recycled is either land filled... Continue Reading

ABSTRACT Plastic and Rubber materials have become the corner stone of our lives, so it leads to generation of huge quantity of waste. These waste materials are either mixed with municipal solid waste or dumped in an open area leading to increase in the area covered under waste land. Plastic and rubber waste, if not recycled is either land filled... Continue Reading

AbstractThe main purpose of the project is to convert polyethylenetetraphylate (PET), a known plastic waste material in Ghana, to wealth. Composite samples were produced by heating aggregates together with shredded PET plastic waste material, while bitumen was added to the plasticcoated aggregates. The composites produced were of 4.5 wt%, 9.0 wt%,... Continue Reading

ABSTRACT The sandcrete blocks have been a major material for the construction of structures in Nigeria. This material have provided a means of constructing walls and partition. However, the sandcrete blocks also have the disadvantage of cost and unavailability of materials such as granite, cement and other combining aggregates. Laterite, a readily... Continue Reading

ABSTRACT This research involves the application of pyrolysis has been viewed as an efficient means for the proper disposal of waste plastics in the environment amongst others. In this research, the influence of two catalysts namely; Zeolite and Titanium (IV) oxide are examined. Zeolite as a catalyst has obtained approval due to its ability to... Continue Reading

TABLE OF CONTENTS DECLARATION..........................................................................................................................ii APPROVAL............................................................................................................................... iii... Continue Reading

ABSTRACT The sandcrete blocks have been a major material for the construction of structures in Nigeria. This material have provided a means of constructing walls and partition. However, the sandcrete blocks also have the disadvantage of cost and unavailability of materials such as granite, cement and other combining aggregates. Laterite, a readily... Continue Reading

ABSTRACT In the course of study on the standardization of material input in Plastics Manufacturing Industries in Delta State (A case study of Unity Plastics Limited, Agbor Delta the researcher based on the analysis, interpretation... Continue Reading

ABSTRACT This project was done to bring to lime light the appropriate method of solid waste handling, separation and utilization, in order to reduce the impact on the environment – environmental degradation. In this work, effort was made to point out the required steps taken in solid waste management.... Continue Reading

ABSTRACT This project was done to bring to lime light the appropriate method of solid waste handling, separation and utilization, in order to reduce the impact on the environment – environmental degradation. In this work, effort was made to point out the required steps taken in solid waste management.    Segregation at the source was done to... Continue Reading

ABSTRACT Analysis of women‟s participation in waste picking and solid waste management as a whole has immense socioeconomic and environmental benefits and also can serve as a basis for identifying problems and making relevant recommendations in Sokoto Metropolis, Nigeria. The objectives of this research are to: review gender participation in... Continue Reading

A CASE STUDY OF OWAN WEST LOCAL GOVERNMENT AREA, EDO STATE ABSTRACT This research study was undertaken with a view to assessing the veracity of low production of rubber in Owan West LGA, Edo State. Several factors were identified as causes of this trend; such as lack of capital, use of old... Continue Reading

Abstract Solid waste management is an established environmental health challenge in most societies. The heterogeneousnature of municipal solid wastemakes its management particularly complex. Waste segregation which is key to proper solid waste management has not been adopted in... Continue Reading

THE EFFECT OF WASTE MANAGEMENT PRACTICE ON  WASTE DISPOSAL IN NIGERIA (A CASE STUDY OF CUDA) ABSTRACT The research  provides a conceptual and theoretical study on the effect of waste management practice on waste disposal in Nigeria.it analyzes the concept of waste and waste management. It projects the challenges and profers strategies for... Continue Reading

ABSTRACT The study uses FMC and AKTH as a case study in order to assess the knowledge, practices and attitudes of waste handlers on biomedical waste management. The study investigates the major problems associated with management and handling practices and the possible solutions to tackle those problems. Based on the findings from this study,... Continue Reading

ABSTRACT The research has been designed to identify the problem and prospect of rubber farming in Edo State Ovia South West Local Government Area. This is done so as to suggest possible ways of exposing to the public the economic condition of rubber production problems and... Continue Reading

ABSTRACT This research study was undertaken with a view to assessing the veracity of rubber production in Ughelli Local Government Area, Edo State. Several factors were identified as causes of this trend; such as lack of capital, use of old plantations,... Continue Reading

THE USE OF LOCALLY OBTAINED RUBBER LATEX AS BINDER IN PAINT FORMULATION  CHAPTER ONE INTRODUCTION The origin of paint and painting started thousands of yeas ago. It can be rightly said that the desire to decorate their mummies sparked of this concept in Egypt around 15,000. Since then, this practice has gradually developed through many stages... Continue Reading

ABSTRACT The main area covered by this project was a research into the desirability of using locally obtained rubber later as loinder in paint manufacture. Considering the huge amount of money being spent on the importation of PVac (Poly vingl acetate) which is widely used as... Continue Reading

PLANTATION AGRICULTURE IN EDO STATE PROBLEMS AND PROSPECT OF RUBBER FARMING ABSTRACT The research has been designed to identify the problem and prospect of rubber farming in Edo State Ovia South West Local Government Area. This is done so as to suggest possible ways of exposing to the public the economic condition of rubber production problems and... Continue Reading

The household lighting cost accounts for 10% of the electric bill, changing the light bulbs effectively can reduce the long term energy costs significantly. In Nigeria, where less than one percent of the population has access to 24 hours of interrupted power supply there is a need for a complementary, renewable source of light which provides... Continue Reading

The household lighting cost accounts for 10% of the electric bill, changing the light bulbs effectively can reduce the long term energy costs significantly. In Nigeria, where less than one percent of the population has access to 24 hours of interrupted power supply there is a need for a complementary, renewable source of light which provides... Continue Reading

ABSTRACT This project work tilted “An Appraisal of Waste Management in Nigeria in (The study of Enugu State Waste Management Authority (ESWAMA), started with the introduction. The statement of the problems includes; The possible outburst of some diseases like cholera, malaria etc. following indiscriminate accumulation of waste in Enugu. The... Continue Reading

ABSTRACT This project work tilted “An Appraisal of Waste Management in Nigeria in (The study of Enugu State Waste Management Authority (ESWAMA), started with the introduction.  The statement of the problems includes; The possible outburst of some diseases like cholera, malaria etc. following indiscriminate accumulation of waste in Enugu.... Continue Reading

ABSTRACT This research work is aimed at knowing the effect of performance evaluation and its effects on employees’ efficiency using Michelin Rubber Estate as a case study. Every organization is designed and exists for a purpose and... Continue Reading

ABSTRACT This research work is aimed at knowing the effect of performance evaluation and its effects on employees’ efficiency using Michelin Rubber Estate as a case study. Every organization is designed and exists for a purpose and it is only when this purpose is attained that the survival of the Business is guaranteed and the corporate goal is... Continue Reading

ABSTRACT This research work is aimed at knowing the effect of performance evaluation and its effects on employees’ efficiency using Michelin Rubber Estate as a case study. Every organization is designed and exists for a purpose and it is only when this purpose is attained that the survival of the Business is guaranteed and  the corporate goal... Continue Reading

THE REASONS FOR LOW PRODUCTION OF RUBBER ABSTRACT This research study was undertaken with a view to assessing the veracity of low production of rubber in Owan West LGA, Edo State. Several factors were identified as causes of this trend; such as lack of capital, use of old plantations, unavailability of land, price of latex etc. a questionnaires... Continue Reading

ABSTRACT Generally, plastic is defined as long-chain organic material which can be formed into desired shape by the application of heat and pressure, also it extends to include so many organic metallic complex and also certain long-chain inorganic material based principally on silicon, phosphorus, nitrogen, aluminum... Continue Reading

ABSTRACT Generally, plastic is defined as long-chain organic material which can be formed into desired shape by the application of heat and pressure, also it extends to include so many organic metallic complex and also certain long-chain inorganic material based principally on silicon, phosphorus, nitrogen, aluminum or boron or mixtures of these.... Continue Reading