Design and construction of an automatic electric cooker with an oven - Project Ideas | Grossarchive.com

Explore Project Topics on: Design and construction of an automatic electric cooker with an oven

Related Works

ABSTRACT An oven is a heated enclosure for heating, baking or drying. An electric oven is a heating device used to heat materials to high temperature when electric current is passed through a high resistance heating element (coil or plate). Electric ovens can fine their application in many fields and area of discipline like factories, research... Continue Reading
ABSTRACT An oven is a heated enclosure for heating, baking or drying. An electric oven is a heating device used to heat materials to high temperature when electric current is passed through a high resistance heating element (coil or plate). Electric ovens can fine their application in many fields and area of discipline like factories, research... Continue Reading
CONSTRUCTION OF A STANDARD BANKING OVEN (MINI-OVEN) WITH DUAL POWER SOURCE (ELECTRIC/GAS) ABSTRACT This project is designed to make the students utilize as many theoretical and practical concept as have been instructed in alstron to mechanical engineering workshop technology. Students are expected to learn and apply concepts, principles about... Continue Reading
ABSTRACT In this project (3) alternative design solutions were considered for the locally made electric run. The authors utilize the available local raw demerits of each alternative with respect to the considered group were discussed and the solutions of the alternative that best satisfied the limitations was selected for production. Material... Continue Reading
ABSTRACT In this project (3) alternative design solutions were considered for the locally made electric run. The authors utilize the available local raw demerits of each alternative with respect to the considered group were discussed and the solutions of the alternative that best satisfied the limitations was selected for production. Material... Continue Reading
ABSTRACT In this project (3) alternative design solutions were considered for the locally made electric run. The authors utilize the available local raw demerits of each alternative with respect to the considered group were discussed and the solutions of the alternative that best satisfied the limitations was selected for production. Material... Continue Reading
Abstract The aim of this work is to characterize properties and microstructure of stainless steel used as a coating on welding of carbon steel sheets. Two carbon steel plates were set as the metal base and the stainless steel coating was applied on the weld bead. The applied process used was the submerged arc welding (SAW) and tests were carried... Continue Reading
Abstract The aim of this work is to characterize properties and microstructure of stainless steel used as a coating on welding of carbon steel sheets. Two carbon steel plates were set as the metal base and the stainless steel coating was applied on the weld bead. The applied process used was the submerged arc welding (SAW) and tests were carried... Continue Reading
Abstract A solar ovenis a device that converts solar energy into useful heat in a confined space (oven chamber) which can be utilised for cooking and baking purposes.The oven consists of plane reflectors to concentrate the solar radiation on the collector.The heat gain is maximum if the collector and reflectors are continuously adjusted such... Continue Reading
ABSTRACT During forging or furnace operation, air is the utility that should be available at all time in order to ensure a smooth and standardized operation. Supplying air manually will reduce productivity and more man hour to accomplish a given task.  Thus, an electric blower was designed in this regard with an efficient electric motor as the... Continue Reading
ABSTRACT No one form of power can sustain a nation. The ever increasing demand for electrical power has arisen from our lifestyles with revolves around electric power to speed up processes of development such as manufacturing, service provision and general well being of man. The need for the provision of quick but minute energy to prevent the... Continue Reading
ABSTRACT During forging or furnace operation, air is the utility that should be available at all time in order to ensure a smooth and standardized operation. Supplying air manually will reduce productivity and more man hour to accomplish a given task.  Thus, an electric blower was designed in this regard with an efficient electric motor as the... Continue Reading
ABSTRACT No one form of power can sustain a nation. The ever increasing demand for electrical power has arisen from our lifestyles with revolves around electric power to speed up processes of development such as manufacturing, service provision and general well being of man. The need for the provision of quick but minute energy to prevent the... Continue Reading
This work deals extensively with the design and construction of an electrodice display (EOD) with audio unit. The device displays the value of a ludo dice in numerical form and also produces sound as it displays the number. The device works with principle of chance employed by ludo game players. The output of the display is usually very rapid that... Continue Reading
ABSTRACT This work deals extensively with the design and construction of an electrodice display (EOD) with audio unit. The device displays the value of a ludo dice in numerical form and also produces sound as it displays the number. The device works with principle of chance... Continue Reading
This work deals extensively with the design and construction of an electrodice display (EOD) with audio unit. The device displays the value of a ludo dice in numerical form and also produces sound as it displays the number. The device works with principle of chance employed by ludo game players. The output of the display is usually very rapid that... Continue Reading
ABSTRACT The practical importance of a battery charging unit in today’s world cannot be over emphasized. This is so since these batteries or accumulators are immensely needed by automobiles and in science laboratories. This thesis describes the methodical approach to the design and construction of any battery changer. However the procedure... Continue Reading
This work is based on automatic changeover switch. If there is failure in main power supply it will automatically change to auxiliary power supply such as generator. This project is based on electromechanical changeover with the use of magnetic contractors, relay,and circuit breaker.... Continue Reading
ABSTRACT          The main aim of any electric power supply in the world is to provide uninterrupted power supply at all times to all its consumers. Although in developing countries, the electric power generated to meet the demands of the growing consumers of electricity is insufficient hence instability and outage.  Power instability or... Continue Reading
ABSTRACT In the world today, the use of power supply in electronics equipment and gadgets has increased and it is still increasing. These power supplies are not stable as required by these electronics. This arise the need for the power stabilization as to overcome this problem This project handles this problem very well. Some recommendations were... Continue Reading
                                                         ABSTRACT This project describes the design and construction of an automatic Battery charger. Automatic Battery chargers are not particularly cheap, but the protection they afford in protecting batteries against overcharging and possible battery damage is highly... Continue Reading
ABSTRACT This is a technical report presented on the design and construction of an Automatic Three Phase Selector. In the construction work, an ordinary level knowledge of electronics principles are observed. We aimed at presenting a practical aspect of the subject and then providing... Continue Reading
ABSTRACT This is a technical report presented on the design and construction of an Automatic Three Phase Selector. In the construction work, an ordinary level knowledge of electronics principles are observed. We aimed at presenting a practical aspect of the subject and then providing... Continue Reading
ABSTRACT This is a technical report presented on the design and construction of an Automatic Three Phase Selector.         In the construction work, an ordinary level knowledge of electronics principles are observed. We aimed at presenting a practical aspect of the subject and then providing the argument necessary for a thorough... Continue Reading
ABSTRACT In the world today, the use of power supply in electronics equipment and gadgets has increased and it is still increasing. These power supplies are not stable as required by these electronics. This arise the need for the power stabilization as to overcome this problem This project handles this problem very well. Some recommendations were... Continue Reading
ABSTRACT The main aim of any electric power supply in the world is to provide uninterrupted power supply at all times to all its consumers. Although, in developing countries, the electric power generated to meet the demands of the growing consumers of electricity is insufficient, hence power instability and outage. Power instability or outage in... Continue Reading
The scope of the project covers aspects like the features of automatic three phase selector, its applications, and its operations. Its advantages and its components. Finally, it covers the importance on the need of automatic three phase selector and contributions toward a greater sharing load balance and a better three phase power distribution and... Continue Reading
ABSTRACT This is a technical report presented on the design and construction of an Automatic Phase Selector.           In the construction work, an ordinary level knowledge of electronics principles are observed. We aimed at presenting a practical aspect of the subject and then providing the argument necessary for a thorough... Continue Reading
ABSTRACT This project proposes a new type of voltage regulator based on single-phase converter otherwise known as transformerless AVR that compensates wide range voltage variations. This is not only capable of compensating variations at a much higher bandwidth but also does not experience mechanical wear down and is cost effective. The proposed... Continue Reading
ABSTRACT The main aim of any electric power supply in the world is to provide uninterrupted power supply at all times to all its consumers. Although, in developing countries, the electric power generated to meet the demands of the growing consumers of electricity is insufficient, hence power instability and outage. Power instability or outage in... Continue Reading
whatsappWhatsApp Us