# DESIGN AND FABRICATION OF BASIC STATIC AND DYNAMIC BALANCING MACHINE

• Type: Project
• Department: Mechanical Engineering
• Project ID: MCE0031
• Access Fee: ₦5,000 (\$14)
• Chapters: 5 Chapters
• Pages: 43 Pages
• Methodology: scientific analysis
• Reference: YES
• Format: Microsoft Word
• Views: 4K

+234 8130 686 500
or
+234 8093 423 853
DESIGN AND FABRICATION OF BASIC STATIC AND DYNAMIC BALANCING MACHINE
ABSTRACT

This work is an attempt to evolve a means for statically and dynamical balancing of mechanical components. This will no doubt evolve greater success in ensuring sound fabrication of our local machine and ensuring that life span of such machine is prolonged since vibration will be reduced to the bearest minimum.
Every wheel and its shaft have to be in a state of balanced, two mating shaft in rotation have to be in a state of static and dynamic balance. This is because unbalance condition produce centrifugal force which increase as the speed of the machine increase, causing damage to machine parts.
To achieve the aim of static and dynamic balancing, various design alternatives for achieving the design solution were synthesized and a choice of economic method which will satisfy the objective was made. Based on the principle guiding the performance of the machine, the dimension and size of the various components was were established and correctly selected and the basic static and dynamic apparatus was fabricated and after testing it was found to satisfy the objective.
CHAPTER ONE
1.0       Introduction
1.1              Objective
1.2              Scope of the Project
CHAPTER TWO
2.0       Literature Review
2.1              What is Balancing
2.2              Type of Unbalance
2.2.1        Static Unbalance
2.2.2         Couple Unbalance
2.2.3         Dynamic Unbalance
2.3              Balancing Equipments
CHAPTER THREE
3.0       Specification of Problem/Synthesis of Solution and Theory of Design
3.1              Background Information/Objective
3.2              Definition
3.3              Condition of Use
3.4              Characteristics
3.5              Performance
3.6              Reliability
3.7              Synthesis of Solution
3.8              Theory of Design
3.8.1         Machine Element and Forces
3.8.2         Balancing of  Rotating Masses
3.8.3         Out of balance masses in a common transverse Plane
3.8.4         Out of Balance Masses in Different Transverse Plane
CHAPTER FOUR
4.0       Design Calculation of Basic Static and Dynamic Balance Machine
4.1              Approximate Weight of the Balancing Weight
4.2              Force Analysis on Shaft
4.3              Shear Force (SF) Calculation
4.4              Bending Moment Calculation
4.5              Shaft Design
4.6              Motor Belt Analysis
4.7              Bearing Selection
CHAPTER FIVE
5.0       Fabrication Procedure/Material Selection/Principle of Operation and Cost Analysis
5.1              Assembly Process
5.2              Material Selection
5.3              Principle of Operation
5.4              Cost Analysis
5.5              Conclusion and Recommendation
Appendix
CHAPTER ONE
1.0       INTRODUCTION
Power transmission in engineering is accomplished by the use of shafts bearings, pulleys, belts, rollers, gears, couplings, etc. Most machine members are linked or interconnected with one another before this power transmission can be effective.
Misalignment or out of balance of shafts or any of these machine members results in excessive viberation which is transmitted to other members and down to the foundation bolt and therefore in----- fatigue stress on the members. Fatigue, probably, is responsible for over 70% of failure of engineering component in operation. Misalignment in shafts and bearing causes excessive load. High speed bearing of aircrafts  that may operate at over 20,000 rpm may become catastrophic if there be any unbalance of the members. Out of balance of machine members creates serious problems on the functionality and durability and machine members and on the machine in general.
It is therefore, with the understanding of he sensitivity of balancing in the design of mechanical components and the need to put balancing into consideration in the fabrication of our local machines, the view to determine the level of out of balance and the subsequent balancing of these machine members that necessitated the idea of designing and constructing a Basic Static and Dynamic Balancing Apparatus of this nature.
1.1       OBJECTIVES
The objective of this project is to design, construct and test a basic static and dynamic balancing apparatus as one of the ways to prevent premature failure of engineering components due to fatigue loading.
1.2       SCOPE OF THE PROJECT
The basic and dynamic balancing machine covers the fundamental exploits of knowledge to design and construct and static  and dynamic balance for any mechanical member since each machine components has its own balance depending on its bulkiness. The basic principle of construction lies on the one chained in our construction. This construction gives illumination for the construction of production and maintenance balance. It also serves as a means of demonstrating static and dynamic balancing in laboratories of higher learning.

DESIGN AND FABRICATION OF BASIC STATIC AND DYNAMIC BALANCING MACHINE
+234 8130 686 500
or
+234 8093 423 853

• Type: Project
• Department: Mechanical Engineering
• Project ID: MCE0031
• Access Fee: ₦5,000 (\$14)
• Chapters: 5 Chapters
• Pages: 43 Pages
• Methodology: scientific analysis
• Reference: YES
• Format: Microsoft Word
• Views: 4K
Payment Instruction
##### Bank payment for Nigerians, Make a payment of ₦ 5,000 to

Bank GTBANK
Account Number 0211074565

### Bitcoin(Btc)

 Copy to clipboard Copy text

#### Details

 Type Project Department Mechanical Engineering Project ID MCE0031 Fee ₦5,000 (\$14) Chapters 5 Chapters No of Pages 43 Pages Methodology scientific analysis Reference YES Format Microsoft Word

#### Related Works

Traditional networking architectures have many significant limitations that must  be overcome to meet modern IT requirements. To overcome these limitations;  Software Defined Networking (SDN) is taking place as the new networking  approach. One of the major issues of traditional networks is that they use static  switches that cause poor... Continue Reading
ABSTRACT A machine for corn shelling is highly and greatly needed to consistency of usage of corn in local and international levels. With regards to this indispensable needs, a corn shelling machine is designed which operates to remove the corn grains and leaving the cobs intact. In attainment to... Continue Reading
ABSTRACT Parameters on which clear prints depends were comprehensively investigated. The study revealed that clear print depends on the impressed pressure the working temperature and the gold foil print paper life expectancy. Also studies were he manner of dependence of these parameters on prints impressed on sheets of varied thickness. The... Continue Reading
ABSTRACT. A machine for corn Sheller is highly and greatly needed for consistence of usage of corn in local and international levels. With regards to this indispensable need, a corn-shelling machine is designed which operates to remove the corn grains and leaving the cobs intact. In attainment to this design objective and aims, a proper... Continue Reading
ABSTRACT             A machine for corn shelling is highly and greatly needed to consistency of usage of corn in local and international levels.             With regards to this indispensable needs, a corn shelling machine is designed which operates to remove the corn grains and leaving the cobs intact.... Continue Reading
ABSTRACT Parameters on which clear prints depends were comprehensively investigated.  The study revealed that clear print depends on the impressed pressure the working temperature and the gold foil print paper life expectancy. Also studies were he manner of dependence of these parameters on prints impressed  on sheets of varied thickness.  The... Continue Reading
CHAPTER ONE INTRODUCTION The project is a pre-requisite for the award of Higher National Diploma (HND) in Mechanical Engineering. The project “Design and fabrication a corn shelling machine” is indeed an essential one in a time like this when almost al human endeavour is embracing technology for... Continue Reading
ABSTRACT Parameters on which clear prints depends were comprehensively investigated. The study revealed that clear print depends on the impressed pressure the working temperature and the gold foil print paper life expectancy. Also studies were he manner of dependence of these parameters on prints... Continue Reading
THE DESIGN AND FABRICATION OF A CANDLE MOULDING MACHINE ABSTRACT The idea of producing “candle stick” brought the existence of fabricating a “candle moulding machine” which can produce a desired shape of a candle foe the benefit of mankind. In chapter 1, which is the research work of the project carried out, the problem encountered and the... Continue Reading
ABSTRACT Groundnut shelling machine was designed and fabricated at the department of Mechanical Engineering, institute of Technology, Kwara State Polytechnic Ilorin aimed at increasing shelling/decorticating efficiency and eliminating drudgery associated with the traditional method of -shelling groundnut and other developed method such as pedal... Continue Reading